diff options
Diffstat (limited to 'addons')
| -rw-r--r-- | addons/x11phonehome/etc/motion/motion.conf | 76 | ||||
| -rw-r--r-- | addons/x11phonehome/etc/motion/motion.conf.orig | 52 | ||||
| -rw-r--r-- | addons/x11phonehome/etc/motion/motionref.pgm | bin | 0 -> 307260 bytes |
3 files changed, 128 insertions, 0 deletions
diff --git a/addons/x11phonehome/etc/motion/motion.conf b/addons/x11phonehome/etc/motion/motion.conf new file mode 100644 index 0000000..ce2566a --- /dev/null +++ b/addons/x11phonehome/etc/motion/motion.conf @@ -0,0 +1,76 @@ +# Minimal motion example config file provided by the +# Debian motion package - for basic webcam operation. +# +# You most certainly want to investigate +# /usr/share/doc/motion/examples/motion-dist.conf.gz +# for further configuration options. Also, refer to the +# motion man page and /usr/share/doc/motion/motion_guide.html +# for detailed information on configuration options. + +daemon off +quiet off + +# You may very well need to change this (check with 'dmesg' +# after plugging in your webcam) +videodevice /dev/video0 + +# Image size in pixels (valid range is camera dependent) +width 640#320 +height 480#240 + +framerate 25 +quality 95 +auto_brightness off + +# Initial brightness, contrast, hue (NTSC), and saturation +# 0 = disabled (valid range 0-255) +brightness 120 +contrast 120 +saturation 0 +hue 0 + +# Encode movies in real-time (install ffmpeg before enabling) +ffmpeg_cap_new off + +# Codec to be used by ffmpeg for the video compression. +# Supported formats: mpeg4, msmpeg4. +ffmpeg_video_codec msmpeg4 + +# Target base directory for pictures and films +# You should probably change this (create dir beforehand) +target_dir /dev/null + +# Define a port number (e.g. 8000) to enable the mini-http server +# 0 = disabled +webcam_port 0 + +# Set to 'off' to allow anybody (not just localhost) to view the +# webcam via the mini-http server (http://hostname:port) +webcam_localhost on + +webcam_quality 75 +webcam_maxrate 30 + +threshold 2500 + +# Picture frames must contain motion at least the specified number of frames +# in a row before they are detected as true motion. At the default of 1, all +# motion is detected. Valid range: 1 to thousands, recommended 1-10 +minimum_motion_frames 1 + +# Noise threshold for the motion detection (default: 32) +noise_level 64 + +# Automatically tune the noise threshold (default: on) +noise_tune off + +# Ignore sudden massive light intensity changes given as a percentage of the picture +# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled +lightswitch 0 + +#maske fil +mask_file /etc/motion/motionref.pgm + +#switchfilter on +#on_event_start simpleopal -lanVIX h323:192.168.3.231 +on_motion_detected simpleopal -lanVIX h323:80.162.179.151 diff --git a/addons/x11phonehome/etc/motion/motion.conf.orig b/addons/x11phonehome/etc/motion/motion.conf.orig new file mode 100644 index 0000000..592bc61 --- /dev/null +++ b/addons/x11phonehome/etc/motion/motion.conf.orig @@ -0,0 +1,52 @@ +# Minimal motion example config file provided by the +# Debian motion package - for basic webcam operation. +# +# You most certainly want to investigate +# /usr/share/doc/motion/examples/motion-dist.conf.gz +# for further configuration options. Also, refer to the +# motion man page and /usr/share/doc/motion/motion_guide.html +# for detailed information on configuration options. + +daemon off +quiet on + +# You may very well need to change this (check with 'dmesg' +# after plugging in your webcam) +videodevice /dev/video0 + +# Image size in pixels (valid range is camera dependent) +width 320 +height 240 + +framerate 25 +quality 85 +auto_brightness off + +# Initial brightness, contrast, hue (NTSC), and saturation +# 0 = disabled (valid range 0-255) +brightness 0 +contrast 0 +saturation 0 +hue 0 + +# Encode movies in real-time (install ffmpeg before enabling) +ffmpeg_cap_new off + +# Codec to be used by ffmpeg for the video compression. +# Supported formats: mpeg4, msmpeg4. +ffmpeg_video_codec msmpeg4 + +# Target base directory for pictures and films +# You should probably change this (create dir beforehand) +target_dir /tmp + +# Define a port number (e.g. 8000) to enable the mini-http server +# 0 = disabled +webcam_port 0 + +# Set to 'off' to allow anybody (not just localhost) to view the +# webcam via the mini-http server (http://hostname:port) +webcam_localhost on + +webcam_quality 50 +webcam_maxrate 8 diff --git a/addons/x11phonehome/etc/motion/motionref.pgm b/addons/x11phonehome/etc/motion/motionref.pgm Binary files differnew file mode 100644 index 0000000..5dce8a9 --- /dev/null +++ b/addons/x11phonehome/etc/motion/motionref.pgm |