Move host and target configs to subdirs. Allow either using a shared config or override with a custom one. Don't exit 0 in common-settings.

git-svn-id: svn+ssh://xayide/home/jonas/private_svn/fleshybrid/homebase@37 8f53b18a-e215-0410-8885-9f593d34873e

7 files changed, 679 insertions, 0 deletions

diff --git a/targets/chr b/targets/chr
new file mode 100644
index 0000000..0d66ca4
--- /dev/null
+++ b/targets/chr
@@ -0,0 +1,101 @@
+#!/bin/sh
+
+# Name and (if wanted) default IP address of system
+hostname="usbstick"
+#domainname="example.tld"
+domainname="jones.dk"
+#hostdefaultip="192.168.133.133"
+
+suite="sarge"
+
+baseworkdir="/home/CHR"
+
+diskhost="hykrion.jones.dk"
+loghost="192.168.102.252"
+
+targettemp="$baseworkdir/tmproot"
+targettemp_fat="$baseworkdir/tmpfatroot"
+targettemp_isofs="$baseworkdir/tmpisoroot"
+targetoffline="$baseworkdir/flashybrid-off"
+
+# Set to one or more (space-delimited, max 4) of these:
+#   SYSLINUX
+#   ISOLINUX (not yet implemented)
+#   GRUB (installs, but fails to load 2nd stage - please help! )
+#   LILO (not yet implemented)
+# First one will be used by default (hit "a" at MBR promt to select)
+# FIXME: fdisk code unfinished: leave it as "SYSLINUX GRUB" for now!
+#bootloaders="SYSLINUX GRUB"
+bootloaders="GRUB"
+
+# Uncomment one or more of these
+# (DFSBUILD, MKINITRD_CD and MKINITRD_NETBOOT not yet implemented)
+FLASHYBRID="yes"
+#DFSBUILD="yes"
+#MKINITRD_CD="yes"
+#MKINITRD_NETBOOT="yes"
+
+# Set to one of the following:
+#   ext2 (recommended!)
+#   ext3
+#   isofs (not yet supported)
+ROOTFS="ext2"
+
+# Set to prioritized list of filesystems you want used on the stick
+# (USB sticks have limited write count: avoid journalling filesystems)
+# (SYSLINUX use only 8.3 filenames, so msdos might be better than vfat)
+selectable_filesystems="ext2 vfat"
+
+# If enabled, this will get get attached to /disk (needed by FLASHYBRID)
+diskdev_host="${diskhost:+$diskhost:$baseworkdir/flashybrid-off}"
+diskdev_target="$diskdev_host"
+diskfs="nfs"
+
+# APT repository for initial setup (and possibly more)
+# (use file:/pub/... and enable nfs - sppedy and works in chroot too)
+#mirror="http://192.168.102.252/mirrors/debian/"
+mirror="file:/pub/mirrors/debian/"
+
+mirror_addon="http://debian.jones.dk/"
+mirror_addon_target="kernels misc"
+
+# If enabled, this will get attached to /pub
+#pubdev_host="${diskhost:+$diskhost:/pub}"
+pubdev_host="192.168.102.252:/pub"
+pubdev_target="$pubdev_host"
+pubfs="nfs"
+
+# Define this to redirect all log output to another host
+loghost="$loghost"
+
+# Packages to install beyond the bare minimum
+aptitude_install="initrd-tools yaird"
+#aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
+aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
+aptitude_install_custom="mc less ssh syslog-ng console-log"
+
+#This one needs to be installed separately from daemons
+#aptitude_install_custom="$aptitude_install_custom file-rc"
+
+# Boot helper apps
+aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils ifplugd ifrename resolvconf module-init-tools"
+
+# Admin helper apps (e.g. for reading gzip'ed files through mc)
+aptitude_install_custom="$aptitude_install_custom mime-support file"
+
+# You probably won't need this (needed for framebuffer-based infoscreen)
+#aptitude_install_custom="$aptitude_install ppmtofb netpbm python"
+
+# You probably won't need this (needed for X11-based infoscreen)
+# (libxmuu1 is for locally added "xset" binary taken from xbase-clients)
+#aptitude_install_custom="$aptitude_install xfonts-base xserver-xfree86 libxmuu1 launchtool unclutter qiv"
+#diskstore="$flashybrid_diskstore /usr/X11R6/man"
+
+# Shorewall firewall
+aptitude_install_custom="$aptitude_install_custom shorewall wget wipl-daemon dhcp3-server"
+
+# Kernel modules to load at boot time
+modules_load="via-rhine"
+
+# Uncomment this to ease tracing configuration tweaks
+trace="yes"
diff --git a/targets/chr.diff b/targets/chr.diff
new file mode 100644
index 0000000..3546565
--- /dev/null
+++ b/targets/chr.diff
@@ -0,0 +1,104 @@
+--- config-dgih	2005-09-29 11:56:48.000000000 +0200
++++ config-chr	2005-09-29 10:43:44.000000000 +0200
+@@ -1,19 +1,17 @@
+ #!/bin/sh
+ 
+ # Name and (if wanted) default IP address of system
+-hostname="vagabonden"
+-domainname="dgi-huset.dk"
++hostname="usbstick"
++#domainname="example.tld"
++domainname="jones.dk"
+ #hostdefaultip="192.168.133.133"
+ 
+ suite="sarge"
+ 
+-baseworkdir="/home/VAGABONDEN"
++baseworkdir="/home/CHR"
+ 
+-# Hosts used for several services like syslog and network filesystems
+-diskhost="lager"
+-loghost="log"
+-
+-dns_server="192.168.101.2"
++diskhost="hykrion.jones.dk"
++loghost="192.168.102.252"
+ 
+ targettemp="$baseworkdir/tmproot"
+ targettemp_fat="$baseworkdir/tmpfatroot"
+@@ -37,10 +35,6 @@
+ #MKINITRD_CD="yes"
+ #MKINITRD_NETBOOT="yes"
+ 
+-# Set this empty to avoid dhcp client altogether
+-DHCPCLIENT="dhcp3"
+-#DHCPCLIENT="udhcpc"
+-
+ # Set to one of the following:
+ #   ext2 (recommended!)
+ #   ext3
+@@ -57,32 +51,34 @@
+ diskdev_target="$diskdev_host"
+ diskfs="nfs"
+ 
+-# Ordered list of all APT sources (if different from DEFAULT and HOST)
+-#aptsources="base security jones"
+-
+-# URI and components of base APT repository as seen on target (if different from host setup)
+-# (remember to enable nfs if using "file:/pub/...")
+-aptsource_base_target="http://ftp.debian.org/debian/"
+-#aptsource_base_target="file:/pub/mirrors/debian/"
+-
+-aptsource_security_target="http://security.debian.org/"
+-
+-# Device name (or NFS share) to mount to "/pub" (if different from HOST)
+-pubdev_target="$diskhost:/pub"
++# APT repository for initial setup (and possibly more)
++# (use file:/pub/... and enable nfs - sppedy and works in chroot too)
++#mirror="http://192.168.102.252/mirrors/debian/"
++mirror="file:/pub/mirrors/debian/"
++
++mirror_addon="http://debian.jones.dk/"
++mirror_addon_target="kernels misc"
++
++# If enabled, this will get attached to /pub
++#pubdev_host="${diskhost:+$diskhost:/pub}"
++pubdev_host="192.168.102.252:/pub"
++pubdev_target="$pubdev_host"
++pubfs="nfs"
+ 
+ # Define this to redirect all log output to another host
+ loghost="$loghost"
+ 
+ # Packages to install beyond the bare minimum
+-aptitude_install="initrd-tools"
+-aptitude_kernel_install="kernel-image-2.4-386"
+-aptitude_install_custom="mc less ssh syslog-ng"
++aptitude_install="initrd-tools yaird"
++#aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
++aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
++aptitude_install_custom="mc less ssh syslog-ng console-log"
+ 
+ #This one needs to be installed separately from daemons
+ #aptitude_install_custom="$aptitude_install_custom file-rc"
+ 
+ # Boot helper apps
+-aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils resolvconf module-init-tools"
++aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils ifplugd ifrename resolvconf module-init-tools"
+ 
+ # Admin helper apps (e.g. for reading gzip'ed files through mc)
+ aptitude_install_custom="$aptitude_install_custom mime-support file"
+@@ -92,8 +88,11 @@
+ 
+ # You probably won't need this (needed for X11-based infoscreen)
+ # (libxmuu1 is for locally added "xset" binary taken from xbase-clients)
+-aptitude_install_custom="$aptitude_install_custom xfonts-base xserver-xfree86 libxmuu1 launchtool unclutter qiv"
+-diskstore="$flashybrid_diskstore /usr/X11R6/man"
++#aptitude_install_custom="$aptitude_install xfonts-base xserver-xfree86 libxmuu1 launchtool unclutter qiv"
++#diskstore="$flashybrid_diskstore /usr/X11R6/man"
++
++# Shorewall firewall
++aptitude_install_custom="$aptitude_install_custom shorewall wget wipl-daemon dhcp3-server"
+ 
+ # Kernel modules to load at boot time
+ modules_load="via-rhine"
diff --git a/targets/dgih b/targets/dgih
new file mode 100644
index 0000000..5daa648
--- /dev/null
+++ b/targets/dgih
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Name and (if wanted) default IP address of system
+hostname="vagabonden"
+domainname="dgi-huset.dk"
+#hostdefaultip="192.168.133.133"
+
+suite="sarge"
+
+baseworkdir="/home/VAGABONDEN"
+
+# Hosts used for several services like syslog and network filesystems
+diskhost="lager"
+loghost="log"
+
+dns_server="192.168.101.2"
+
+targettemp="$baseworkdir/tmproot"
+targettemp_fat="$baseworkdir/tmpfatroot"
+targettemp_isofs="$baseworkdir/tmpisoroot"
+targetoffline="$baseworkdir/flashybrid-off"
+
+# Set to one or more (space-delimited, max 4) of these:
+#   SYSLINUX
+#   ISOLINUX (not yet implemented)
+#   GRUB (installs, but fails to load 2nd stage - please help! )
+#   LILO (not yet implemented)
+# First one will be used by default (hit "a" at MBR promt to select)
+# FIXME: fdisk code unfinished: leave it as "SYSLINUX GRUB" for now!
+#bootloaders="SYSLINUX GRUB"
+bootloaders="GRUB"
+
+# Uncomment one or more of these
+# (DFSBUILD, MKINITRD_CD and MKINITRD_NETBOOT not yet implemented)
+FLASHYBRID="yes"
+#DFSBUILD="yes"
+#MKINITRD_CD="yes"
+#MKINITRD_NETBOOT="yes"
+
+# Set this empty to avoid dhcp client altogether
+DHCPCLIENT="dhcp3"
+#DHCPCLIENT="udhcpc"
+
+# Set to one of the following:
+#   ext2 (recommended!)
+#   ext3
+#   isofs (not yet supported)
+ROOTFS="ext2"
+
+# Set to prioritized list of filesystems you want used on the stick
+# (USB sticks have limited write count: avoid journalling filesystems)
+# (SYSLINUX use only 8.3 filenames, so msdos might be better than vfat)
+selectable_filesystems="ext2 vfat"
+
+# If enabled, this will get get attached to /disk (needed by FLASHYBRID)
+diskdev_host="${diskhost:+$diskhost:$baseworkdir/flashybrid-off}"
+diskdev_target="$diskdev_host"
+diskfs="nfs"
+
+# Ordered list of all APT sources (if different from DEFAULT and HOST)
+#aptsources="base security jones"
+
+# URI and components of base APT repository as seen on target (if different from host setup)
+# (remember to enable nfs if using "file:/pub/...")
+aptsource_base_target="http://ftp.debian.org/debian/"
+#aptsource_base_target="file:/pub/mirrors/debian/"
+
+aptsource_security_target="http://security.debian.org/"
+
+# Device name (or NFS share) to mount to "/pub" (if different from HOST)
+pubdev_target="$diskhost:/pub"
+
+# Define this to redirect all log output to another host
+loghost="$loghost"
+
+# Packages to install beyond the bare minimum
+aptitude_install="initrd-tools"
+aptitude_kernel_install="kernel-image-2.4-386"
+aptitude_install_custom="mc less ssh syslog-ng"
+
+#This one needs to be installed separately from daemons
+#aptitude_install_custom="$aptitude_install_custom file-rc"
+
+# Boot helper apps
+aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils resolvconf module-init-tools"
+
+# Admin helper apps (e.g. for reading gzip'ed files through mc)
+aptitude_install_custom="$aptitude_install_custom mime-support file"
+
+# You probably won't need this (needed for framebuffer-based infoscreen)
+#aptitude_install_custom="$aptitude_install ppmtofb netpbm python"
+
+# You probably won't need this (needed for X11-based infoscreen)
+# (libxmuu1 is for locally added "xset" binary taken from xbase-clients)
+aptitude_install_custom="$aptitude_install_custom xfonts-base xserver-xfree86 libxmuu1 launchtool unclutter qiv"
+diskstore="$flashybrid_diskstore /usr/X11R6/man"
+
+# Kernel modules to load at boot time
+modules_load="via-rhine"
+
+# Uncomment this to ease tracing configuration tweaks
+trace="yes"
diff --git a/targets/dgih.diff b/targets/dgih.diff
new file mode 100644
index 0000000..dc4dd5d
--- /dev/null
+++ b/targets/dgih.diff
@@ -0,0 +1,43 @@
+--- config-dgih	2005-01-23 13:32:41.000000000 +0100
++++ config-chr.tmp	2005-08-17 20:47:27.000000000 +0200
+@@ -1,28 +1,23 @@
+ targettemp_fat="$baseworkdir/tmpfatroot"
+ targettemp_isofs="$baseworkdir/tmpisoroot"
+ targetoffline="$baseworkdir/flashybrid-off"
+ 
+-# Uncomment these to work on actual drive (instead of dir)
+-mountpoint="/mnt/usbstick"
+-# FIXME: Handle device here being different from target system
+-usbdevice="/dev/sda"
+-usbdevice_grub="hd0"
+-
+ # Set to one or more (space-delimited, max 4) of these:
+ #   SYSLINUX
+ #   ISOLINUX (not yet implemented)
+@@ -57,22 +52,31 @@
+ 
+ # APT repository for initial setup (and possibly more)
+ # (use file:/pub/... and enable nfs - sppedy and works in chroot too)
+-mirror="http://ftp.debian.org/debian/"
++#mirror="http://192.168.102.252/mirrors/debian/"
++mirror="file:/pub/mirrors/debian/"
+
+ loghost="$loghost"
+ 
+ # Packages to install beyond the bare minimum
+-aptitude_install="initrd-tools"
+-aptitude_kernel_install="kernel-image-2.4-386"
+-aptitude_install_custom="mc less ssh"
++aptitude_install="initrd-tools yaird"
++#aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
++aptitude_kernel_install="kernel-image-2.6.12+debianlogo+squashfs+wrr"
++aptitude_install_custom="mc less ssh syslog-ng console-log"
++
++#This one needs to be installed separately from daemons
++#aptitude_install_custom="$aptitude_install_custom file-rc"
+ 
+ # Boot helper apps
+-aptitude_install_custom="$aptitude_install_custom discover memtest86+"
++aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils ifplugd ifrename resolvconf module-init-tools"
+ 
+ # Admin helper apps (e.g. for reading gzip'ed files through mc)
diff --git a/targets/homebase b/targets/homebase
new file mode 100644
index 0000000..da593c9
--- /dev/null
+++ b/targets/homebase
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+# Name and (if wanted) default IP address of system
+hostname="tomos"
+domainname="homebase.dk"
+#hostdefaultip="192.168.133.133"
+
+suite="etch"
+# Suppress non-existing sid security updates
+aptsources="base"
+
+baseworkdir="/home/TOMOS"
+
+# Hosts used for several services like syslog and network filesystems
+diskhost=""
+loghost="log"
+
+dns_server="192.168.1.2"
+
+targettemp="$baseworkdir/tmproot"
+targettemp_fat="$baseworkdir/tmpfatroot"
+targettemp_isofs="$baseworkdir/tmpisoroot"
+targetoffline="$baseworkdir/flashybrid-off"
+
+# We have plenty of room, so use flashybrid only for ramstore
+#flashybrid_diskstore="
+#"
+
+# Set to one or more (space-delimited, max 4) of these:
+#   SYSLINUX
+#   ISOLINUX (not yet implemented)
+#   GRUB (installs, but fails to load 2nd stage - please help! )
+#   LILO (not yet implemented)
+# First one will be used by default (hit "a" at MBR promt to select)
+# FIXME: fdisk code unfinished: leave it as "SYSLINUX GRUB" for now!
+#bootloaders="SYSLINUX GRUB"
+bootloaders="GRUB"
+#bootloaders="SYSLINUX"
+
+# Uncomment one or more of these
+# (DFSBUILD, MKINITRD_CD and MKINITRD_NETBOOT not yet implemented)
+FLASHYBRID="yes"
+#DFSBUILD="yes"
+#MKINITRD_CD="yes"
+#MKINITRD_NETBOOT="yes"
+
+# Keep all stored files locally, even when using flashybrid
+flashybrid_diskstore=""
+
+# Set this empty to avoid dhcp client altogether
+DHCPCLIENT="dhcp3"
+#DHCPCLIENT="udhcpc"
+
+# Set to one of the following:
+#   ext2 (recommended!)
+#   ext3
+#   isofs (not yet supported)
+ROOTFS="ext2"
+
+# Set to prioritized list of filesystems you want used on the stick
+# (USB sticks have limited write count: avoid journalling filesystems)
+# (SYSLINUX use only 8.3 filenames, so msdos might be better than vfat)
+selectable_filesystems="ext2 vfat"
+
+# If enabled, this will get get attached to /disk (needed by FLASHYBRID)
+diskdev_host="${diskhost:+$diskhost:$baseworkdir/flashybrid-off}"
+diskdev_target="$diskdev_host"
+diskfs="nfs"
+
+# Ordered list of all APT sources (if different from DEFAULT and HOST)
+#aptsources="base security jones"
+
+# URI and components of base APT repository as seen on target (if different from host setup)
+# (remember to enable nfs if using "file:/pub/...")
+aptsource_base_target="http://proxy:9999/"
+
+aptsource_security_target="http://proxy:9999/security"
+
+# Device name (or NFS share) to mount to "/pub" (if different from HOST)
+#pubdev_target="$diskhost:/pub"
+
+# Define this to redirect all log output to another host
+loghost="$loghost"
+
+# Packages to install beyond the bare minimum
+aptitude_install="initramfs-tools"
+#aptitude_kernel_install="kernel-image-2.4-386"
+kernel_majorver="2.6"
+kernel_minorver="16"
+kernel_abi="2"
+kernel_subarch="486"
+#FIXME: Resolve name automagically
+kernel_name="${kernel_majorver}.${kernel_minorver}-${kernel_abi}-${kernel_subarch}"
+aptitude_kernel_install="linux-image-${kernel_majorver}-${kernel_subarch}"
+
+#This one needs to be installed separately from daemons
+#aptitude_install_custom="$aptitude_install_custom file-rc"
+
+aptsources="$aptsources jones"
+aptsource_jones_components="kernels boot voip mediastreaming"
+
+addons="boot net admin acpi disk"
+
+# We want from a booted stick to be able to generate a yaird initrd for booting on firewire
+aptitude_install_custom="yaird"
+
+# Kernel modules to load at boot time
+modules_load="8139too"
+
+# Uncomment this to ease tracing configuration tweaks
+trace="yes"
diff --git a/targets/jones b/targets/jones
new file mode 100644
index 0000000..ff18f24
--- /dev/null
+++ b/targets/jones
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+# Name and (if wanted) default IP address of system
+hostname="perilin"
+domainname="jones.dk"
+#hostdefaultip="192.168.133.133"
+
+suite="sid"
+# Suppress non-existing sid security updates
+aptsources="base"
+
+baseworkdir="/home/PERILIN"
+
+# Hosts used for several services like syslog and network filesystems
+diskhost="hykrion"
+loghost="hysbald"
+
+dns_server="192.168.222.252"
+
+targettemp="$baseworkdir/tmproot"
+targettemp_fat="$baseworkdir/tmpfatroot"
+targettemp_isofs="$baseworkdir/tmpisoroot"
+targetoffline="$baseworkdir/flashybrid-off"
+
+# Set to one or more (space-delimited, max 4) of these:
+#   SYSLINUX
+#   ISOLINUX (not yet implemented)
+#   GRUB (installs, but fails to load 2nd stage - please help! )
+#   LILO (not yet implemented)
+# First one will be used by default (hit "a" at MBR promt to select)
+# FIXME: fdisk code unfinished: leave it as "SYSLINUX GRUB" for now!
+#bootloaders="SYSLINUX GRUB"
+bootloaders="GRUB"
+
+# Uncomment one or more of these
+# (DFSBUILD, MKINITRD_CD and MKINITRD_NETBOOT not yet implemented)
+FLASHYBRID="yes"
+#DFSBUILD="yes"
+#MKINITRD_CD="yes"
+#MKINITRD_NETBOOT="yes"
+
+# Set this empty to avoid dhcp client altogether
+DHCPCLIENT="dhcp3"
+#DHCPCLIENT="udhcpc"
+
+# Set to one of the following:
+#   ext2 (recommended!)
+#   ext3
+#   isofs (not yet supported)
+ROOTFS="ext2"
+
+# Set to prioritized list of filesystems you want used on the stick
+# (USB sticks have limited write count: avoid journalling filesystems)
+# (SYSLINUX use only 8.3 filenames, so msdos might be better than vfat)
+selectable_filesystems="ext2 vfat"
+
+# If enabled, this will get get attached to /disk (needed by FLASHYBRID)
+diskdev_host="${diskhost:+$diskhost:$baseworkdir/flashybrid-off}"
+diskdev_target="$diskdev_host"
+diskfs="nfs"
+
+# Ordered list of all APT sources (if different from DEFAULT and HOST)
+#aptsources="base security jones"
+
+# URI and components of base APT repository as seen on target (if different from host setup)
+# (remember to enable nfs if using "file:/pub/...")
+#aptsource_base_target="http://ftp.debian.org/debian/"
+aptsource_base_target="file:/pub/mirrors/debian/"
+
+aptsource_security_target="http://security.debian.org/"
+
+# Device name (or NFS share) to mount to "/pub" (if different from HOST)
+pubdev_target="$diskhost:/pub"
+
+# Define this to redirect all log output to another host
+loghost="$loghost"
+
+# Packages to install beyond the bare minimum
+aptitude_install="initramfs-tools"
+#aptitude_kernel_install="kernel-image-2.4-386"
+aptitude_kernel_install="kernel-image-2.6-386"
+aptitude_install_custom="mc less openssh-client openssh-server syslog-ng ifupdown"
+
+#This one needs to be installed separately from daemons
+#aptitude_install_custom="$aptitude_install_custom file-rc"
+
+# Boot helper apps
+aptitude_install_custom="$aptitude_install_custom memtest86+ udev usbutils resolvconf module-init-tools"
+
+# Admin helper apps (e.g. for reading gzip'ed files through mc)
+#aptitude_install_custom="$aptitude_install_custom mime-support file"
+aptitude_install_custom="$aptitude_install_custom mime-support"
+
+# You probably won't need this (needed for framebuffer-based infoscreen)
+#aptitude_install_custom="$aptitude_install ppmtofb netpbm python"
+
+# You probably won't need this (needed for X11-based infoscreen)
+# (libxmuu1 is for locally added "xset" binary taken from xbase-clients)
+#aptitude_install_custom="$aptitude_install_custom xfonts-base xserver-xfree86 libxmuu1 launchtool unclutter qiv"
+#diskstore="$flashybrid_diskstore /usr/X11R6/man"
+
+# Shorewall firewall
+#aptitude_install_custom="$aptitude_install_custom shorewall wget wipl-daemon dhcp3-server iptstate"
+aptitude_install_custom="$aptitude_install_custom tcpd shorewall wget dhcp3-server iptstate br2684ctl"
+
+# Kernel modules to load at boot time
+modules_load="via-rhine"
+
+# Uncomment this to ease tracing configuration tweaks
+trace="yes"
diff --git a/targets/lasse b/targets/lasse
new file mode 100644
index 0000000..9c43d56
--- /dev/null
+++ b/targets/lasse
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Name and (if wanted) default IP address of system
+hostname="georg"
+domainname="jones.dk"
+#hostdefaultip="192.168.133.133"
+
+suite="sid"
+# Suppress non-existing sid security updates
+aptsources="base"
+
+baseworkdir="/home/GEORG"
+
+# Hosts used for several services like syslog and network filesystems
+diskhost="192.168.102.159"
+loghost="hysbald"
+
+dns_server="192.168.102.252"
+
+targettemp="$baseworkdir/tmproot"
+targettemp_fat="$baseworkdir/tmpfatroot"
+targettemp_isofs="$baseworkdir/tmpisoroot"
+targetoffline="$baseworkdir/flashybrid-off"
+
+# We have plenty of room, so use flashybrid only for ramstore
+#flashybrid_diskstore="
+#"
+
+# Set to one or more (space-delimited, max 4) of these:
+#   SYSLINUX
+#   ISOLINUX (not yet implemented)
+#   GRUB (installs, but fails to load 2nd stage - please help! )
+#   LILO (not yet implemented)
+# First one will be used by default (hit "a" at MBR promt to select)
+# FIXME: fdisk code unfinished: leave it as "SYSLINUX GRUB" for now!
+#bootloaders="SYSLINUX GRUB"
+bootloaders="GRUB"
+#bootloaders="SYSLINUX"
+
+# Uncomment one or more of these
+# (DFSBUILD, MKINITRD_CD and MKINITRD_NETBOOT not yet implemented)
+FLASHYBRID="yes"
+#DFSBUILD="yes"
+#MKINITRD_CD="yes"
+#MKINITRD_NETBOOT="yes"
+
+# Set this empty to avoid dhcp client altogether
+DHCPCLIENT="dhcp3"
+#DHCPCLIENT="udhcpc"
+
+# Set to one of the following:
+#   ext2 (recommended!)
+#   ext3
+#   isofs (not yet supported)
+ROOTFS="ext2"
+
+# Set to prioritized list of filesystems you want used on the stick
+# (USB sticks have limited write count: avoid journalling filesystems)
+# (SYSLINUX use only 8.3 filenames, so msdos might be better than vfat)
+selectable_filesystems="ext2 vfat"
+
+# If enabled, this will get get attached to /disk (needed by FLASHYBRID)
+diskdev_host="${diskhost:+$diskhost:$baseworkdir/flashybrid-off}"
+diskdev_target="$diskdev_host"
+diskfs="nfs"
+
+# Ordered list of all APT sources (if different from DEFAULT and HOST)
+#aptsources="base security jones"
+
+# URI and components of base APT repository as seen on target (if different from host setup)
+# (remember to enable nfs if using "file:/pub/...")
+#aptsource_base_target="http://ftp.debian.org/debian/"
+aptsource_base_target="file:/pub/mirrors/debian/"
+
+aptsource_security_target="http://security.debian.org/"
+
+# Device name (or NFS share) to mount to "/pub" (if different from HOST)
+pubdev_target="$diskhost:/pub"
+
+# Define this to redirect all log output to another host
+loghost="$loghost"
+
+# Packages to install beyond the bare minimum
+aptitude_install="initramfs-tools"
+#aptitude_kernel_install="kernel-image-2.4-386"
+kernel_majorver="2.6"
+kernel_minorver="16"
+kernel_abi="2"
+kernel_subarch="486"
+#FIXME: Resolve name automagically
+kernel_name="${kernel_majorver}.${kernel_minorver}-${kernel_abi}-${kernel_subarch}"
+aptitude_kernel_install="linux-image-${kernel_majorver}-${kernel_subarch}"
+
+#This one needs to be installed separately from daemons
+#aptitude_install_custom="$aptitude_install_custom file-rc"
+
+aptsources="$aptsources jones"
+aptsource_jones_components="kernels boot voip mediastreaming"
+
+addons="boot net admin x11phonehome"
+
+aptitude_install_custom="pwc-modules-${kernel_name} spca5xx-modules-${kernel_name}"
+
+# Kernel modules to load at boot time
+modules_load="8139too"
+
+# Uncomment this to ease tracing configuration tweaks
+trace="yes"