diff options
Diffstat (limited to 'mailman/nilsstaerk.py')
-rw-r--r-- | mailman/nilsstaerk.py | 1268 |
1 files changed, 0 insertions, 1268 deletions
diff --git a/mailman/nilsstaerk.py b/mailman/nilsstaerk.py deleted file mode 100644 index c958d1b..0000000 --- a/mailman/nilsstaerk.py +++ /dev/null @@ -1,1268 +0,0 @@ -# -*- python -*- -# -*- coding: us-ascii -*- -## "nilsstaerk" mailing list configuration settings -## captured on Tue Dec 5 15:21:15 2006 - -## General options -# -# Fundamental list characteristics, including descriptive info and basic -# behaviors. - -# The capitalization of this name can be changed to make it presentable -# in polite company as a proper noun, or to make an acronym part all -# upper case, etc. However, the name will be advertised as the email -# address (e.g., in subscribe confirmation notices), so it should not be -# otherwise altered. (Email addresses are not case sensitive, but they -# are sensitive to almost everything else :-) -real_name = 'NilsStaerk' - -# There are two ownership roles associated with each mailing list. The -# list administrators are the people who have ultimate control over all -# parameters of this mailing list. They are able to change any list -# configuration variable available through these administration web -# pages. -# -# The list moderators have more limited permissions; they are not able -# to change any list configuration variable, but they are allowed to -# tend to pending administration requests, including approving or -# rejecting held subscription requests, and disposing of held postings. -# Of course, the list administrators can also tend to pending requests. -# -# In order to split the list ownership duties into administrators and -# moderators, you must set a separate moderator password, and also -# provide the email addresses of the list moderators. Note that the -# field you are changing here specifies the list administrators. -owner = ['nils@nilsstaerk.dk'] - -# There are two ownership roles associated with each mailing list. The -# list administrators are the people who have ultimate control over all -# parameters of this mailing list. They are able to change any list -# configuration variable available through these administration web -# pages. -# -# The list moderators have more limited permissions; they are not able -# to change any list configuration variable, but they are allowed to -# tend to pending administration requests, including approving or -# rejecting held subscription requests, and disposing of held postings. -# Of course, the list administrators can also tend to pending requests. -# -# In order to split the list ownership duties into administrators and -# moderators, you must set a separate moderator password, and also -# provide the email addresses of the list moderators in this section. -# Note that the field you are changing here specifies the list -# moderators. -moderator = [] - -# This description is used when the mailing list is listed with other -# mailing lists, or in headers, and so forth. It should be as succinct -# as you can get it, while still identifying what the list is. -description = 'Info regarding Nils Staerk' - -# The text will be treated as html except that newlines will be -# translated to <br> - so you can use links, preformatted text, etc, but -# don't put in carriage returns except where you mean to separate -# paragraphs. And review your changes - bad html (like some -# unterminated HTML constructs) can prevent display of the entire -# listinfo page. -info = '' - -# This text will be prepended to subject lines of messages posted to the -# list, to distinguish mailing list messages in mailbox summaries. -# Brevity is premium here, it's ok to shorten long mailing list names to -# something more concise, as long as it still identifies the mailing -# list. You can also add a sequential number by %d substitution -# directive. eg.; [listname %d] -> [listname 123] (listname %05d) -> -# (listname 00123) -# -subject_prefix = '[Nilsstaerk] ' - -# Hide the sender of a message, replacing it with the list address -# (Removes From, Sender and Reply-To fields) -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -anonymous_list = 0 - -# Should any existing Reply-To: header found in the original message be -# stripped? If so, this will be done regardless of whether an explict -# Reply-To: header is added by Mailman or not. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -first_strip_reply_to = 0 - -# This option controls what Mailman does to the Reply-To: header in -# messages flowing through this mailing list. When set to Poster, no -# Reply-To: header is added by Mailman, although if one is present in -# the original message, it is not stripped. Setting this value to -# either This list or Explicit address causes Mailman to insert a -# specific Reply-To: header in all messages, overriding the header in -# the original message if necessary (Explicit address inserts the value -# of <a href="?VARHELP=general/reply_to_address">reply_to_address). -# -# There are many reasons not to introduce or override the Reply-To: -# header. One is that some posters depend on their own Reply-To: -# settings to convey their valid return address. Another is that -# modifying Reply-To: makes it much more difficult to send private -# replies. See <a -# href="http://www.unicom.com/pw/reply-to-harmful.html">`Reply-To' -# Munging Considered Harmful for a general discussion of this issue. -# See <a -# href="http://www.metasystema.net/essays/reply-to.mhtml">Reply-To -# Munging Considered Useful for a dissenting opinion. -# -# Some mailing lists have restricted posting privileges, with a parallel -# list devoted to discussions. Examples are `patches' or `checkin' -# lists, where software changes are posted by a revision control system, -# but discussion about the changes occurs on a developers mailing list. -# To support these types of mailing lists, select Explicit address and -# set the Reply-To: address below to point to the parallel list. -# -# legal values are: -# 0 = "Poster" -# 1 = "This list" -# 2 = "Explicit address" -reply_goes_to_list = 0 - -# This is the address set in the Reply-To: header when the <a -# href="?VARHELP=general/reply_goes_to_list">reply_goes_to_list option -# is set to Explicit address. -# -# There are many reasons not to introduce or override the Reply-To: -# header. One is that some posters depend on their own Reply-To: -# settings to convey their valid return address. Another is that -# modifying Reply-To: makes it much more difficult to send private -# replies. See <a -# href="http://www.unicom.com/pw/reply-to-harmful.html">`Reply-To' -# Munging Considered Harmful for a general discussion of this issue. -# See <a -# href="http://www.metasystema.net/essays/reply-to.mhtml">Reply-To -# Munging Considered Useful for a dissenting opinion. -# -# Some mailing lists have restricted posting privileges, with a parallel -# list devoted to discussions. Examples are `patches' or `checkin' -# lists, where software changes are posted by a revision control system, -# but discussion about the changes occurs on a developers mailing list. -# To support these types of mailing lists, specify the explicit -# Reply-To: address here. You must also specify Explicit address in the -# reply_goes_to_list variable. -# -# Note that if the original message contains a Reply-To: header, it will -# not be changed. -reply_to_address = '' - -# Set this to yes when this list is intended to cascade only to other -# mailing lists. When set, meta notices like confirmations and password -# reminders will be directed to an address derived from the member's -# address - it will have the value of "umbrella_member_suffix" appended -# to the member's account name. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -umbrella_list = 0 - -# When "umbrella_list" is set to indicate that this list has other -# mailing lists as members, then administrative notices like -# confirmations and password reminders need to not be sent to the member -# list addresses, but rather to the owner of those member lists. In -# that case, the value of this setting is appended to the member's -# account name for such notices. `-owner' is the typical choice. This -# setting has no effect when "umbrella_list" is "No". -umbrella_member_suffix = '-owner' - -# Turn this on if you want password reminders to be sent once per month -# to your members. Note that members may disable their own individual -# password reminders. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -send_reminders = 0 - -# This value, if any, will be added to the front of the new-subscriber -# welcome message. The rest of the welcome message already describes -# the important addresses and URLs for the mailing list, so you don't -# need to include any of that kind of stuff here. This should just -# contain mission-specific kinds of things, like etiquette policies or -# team orientation, or that kind of thing. -# -# Note that this text will be wrapped, according to the following rules: -# Each paragraph is filled so that no line is longer than 70 characters. -# Any line that begins with whitespace is not filled. A blank line -# separates paragraphs. -# -welcome_msg = '' - -# Turn this off only if you plan on subscribing people manually and -# don't want them to know that you did so. This option is most useful -# for transparently migrating lists from some other mailing list manager -# to Mailman. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -send_welcome_msg = 0 - -# Text sent to people leaving the list. If empty, no special text will -# be added to the unsubscribe message. -goodbye_msg = '' - -# Send goodbye message to members when they are unsubscribed? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -send_goodbye_msg = 1 - -# List moderators (and list administrators) are sent daily reminders of -# requests pending approval, like subscriptions to a moderated list, or -# postings that are being held for one reason or another. Setting this -# option causes notices to be sent immediately on the arrival of new -# requests as well. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -admin_immed_notify = 1 - -# Should administrator get notices of subscribes and unsubscribes? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -admin_notify_mchanges = 1 - -# Send mail to poster when their posting is held for approval? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -respond_to_post_requests = 1 - -# When this option is enabled, all list traffic is emergency moderated, -# i.e. held for moderation. Turn this option on when your list is -# experiencing a flamewar and you want a cooling off period. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -emergency = 0 - -# When a new member is subscribed to this list, their initial set of -# options is taken from the this variable's setting. -new_member_options = 256 - -# Administrivia tests will check postings to see whether it's really -# meant as an administrative request (like subscribe, unsubscribe, etc), -# and will add it to the the administrative requests queue, notifying -# the administrator of the new request, in the process. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -administrivia = 1 - -# Maximum length in kilobytes (KB) of a message body. Use 0 for no -# limit. -max_message_size = 40 - -# The "host_name" is the preferred name for email to mailman-related -# addresses on this host, and generally should be the mail host's -# exchanger address, if any. This setting can be useful for selecting -# among alternative names of a host that has multiple addresses. -host_name = 'www.nilsstaerk.dk' - -# RFC 2369 defines a set of List-* headers that are normally added to -# every message sent to the list membership. These greatly aid end-users -# who are using standards compliant mail readers. They should normally -# always be enabled. -# -# However, not all mail readers are standards compliant yet, and if you -# have a large number of members who are using non-compliant mail -# readers, they may be annoyed at these headers. You should first try -# to educate your members as to why these headers exist, and how to hide -# them in their mail clients. As a last resort you can disable these -# headers, but this is not recommended (and in fact, your ability to -# disable these headers may eventually go away). -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -include_rfc2369_headers = 1 - -# The List-Post: header is one of the headers recommended by RFC 2369. -# However for some announce-only mailing lists, only a very select group -# of people are allowed to post to the list; the general membership is -# usually not allowed to post. For lists of this nature, the List-Post: -# header is misleading. Select No to disable the inclusion of this -# header. (This does not affect the inclusion of the other List-*: -# headers.) -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -include_list_post_header = 1 - -# Discard held messages older than this number of days. Use 0 for no -# automatic discarding. -max_days_to_hold = 0 - -## Language options -# -# Natural language (internationalization) options. - -# This is the default natural language for this mailing list. If more -# than one language is supported then users will be able to select their -# own preferences for when they interact with the list. All other -# interactions will be conducted in the default language. This applies -# to both web-based and email-based messages, but not to email posted by -# list members. -preferred_language = 'en' - -# These are all the natural languages supported by this list. Note that -# the default language must be included. -available_languages = ['en', 'da'] - -# If your mailing list's default language uses a non-ASCII character set -# and the prefix contains non-ASCII characters, the prefix will always -# be encoded according to the relevant standards. However, if your -# prefix contains only ASCII characters, you may want to set this option -# to Never to disable prefix encoding. This can make the subject -# headers slightly more readable for users with mail readers that don't -# properly handle non-ASCII encodings. -# -# Note however, that if your mailing list receives both encoded and -# unencoded subject headers, you might want to choose As needed. Using -# this setting, Mailman will not encode ASCII prefixes when the rest of -# the header contains only ASCII characters, but if the original header -# contains non-ASCII characters, it will encode the prefix. This avoids -# an ambiguity in the standards which could cause some mail readers to -# display extra, or missing spaces between the prefix and the original -# header. -# -# legal values are: -# 0 = "Never" -# 1 = "Always" -# 2 = "As needed" -encode_ascii_prefixes = 0 - -## Nondigest options -# -# Policies concerning immediately delivered list traffic. - -# Can subscribers choose to receive mail immediately, rather than in -# batched digests? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -nondigestable = 1 - -# Text prepended to the top of every immediately-delivery message. This -# text can include Python format strings which are resolved against list -# attributes. The list of substitutions allowed are: -# -# -# real_name - The "pretty" name of the list; usually the list name with -# capitalization. -# -# list_name - The name by which the list is identified in URLs, where -# case is significant. -# -# host_name - The fully qualified domain name that the list server runs -# on. -# -# web_page_url - The base URL for Mailman. This can be appended with, -# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing -# list. -# -# description - The brief description of the mailing list. -# -# info - The full description of the mailing list. -# -# cgiext - The extension added to CGI scripts. -# -# -msg_header = '' - -# Text appended to the bottom of every immediately-delivery message. -# This text can include Python format strings which are resolved against -# list attributes. The list of substitutions allowed are: -# -# -# real_name - The "pretty" name of the list; usually the list name with -# capitalization. -# -# list_name - The name by which the list is identified in URLs, where -# case is significant. -# -# host_name - The fully qualified domain name that the list server runs -# on. -# -# web_page_url - The base URL for Mailman. This can be appended with, -# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing -# list. -# -# description - The brief description of the mailing list. -# -# info - The full description of the mailing list. -# -# cgiext - The extension added to CGI scripts. -# -# -msg_footer = """_______________________________________________ -%(real_name)s mailing list -%(real_name)s@%(host_name)s -%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s""" - -# When you scrub attachments, they are stored in archive area and links -# are made in the message so that the member can access via web browser. -# If you want the attachments totally disappear, you can use content -# filter options. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -scrub_nondigest = False - -## Digest options -# -# Batched-delivery digest characteristics. - -# Can list members choose to receive list traffic bunched in digests? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -digestable = 1 - -# Which delivery mode is the default for new users? -# -# legal values are: -# 0 = "Regular" -# 1 = "Digest" -digest_is_default = 0 - -# When receiving digests, which format is default? -# -# legal values are: -# 0 = "Plain" -# 1 = "MIME" -mime_is_default_digest = 0 - -# How big in Kb should a digest be before it gets sent out? -digest_size_threshhold = 30 - -# Should a digest be dispatched daily when the size threshold isn't -# reached? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -digest_send_periodic = 1 - -# Text attached (as an initial message, before the table of contents) to -# the top of digests. This text can include Python format strings which -# are resolved against list attributes. The list of substitutions -# allowed are: -# -# -# real_name - The "pretty" name of the list; usually the list name with -# capitalization. -# -# list_name - The name by which the list is identified in URLs, where -# case is significant. -# -# host_name - The fully qualified domain name that the list server runs -# on. -# -# web_page_url - The base URL for Mailman. This can be appended with, -# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing -# list. -# -# description - The brief description of the mailing list. -# -# info - The full description of the mailing list. -# -# cgiext - The extension added to CGI scripts. -# -# -digest_header = '' - -# Text attached (as a final message) to the bottom of digests. This text -# can include Python format strings which are resolved against list -# attributes. The list of substitutions allowed are: -# -# -# real_name - The "pretty" name of the list; usually the list name with -# capitalization. -# -# list_name - The name by which the list is identified in URLs, where -# case is significant. -# -# host_name - The fully qualified domain name that the list server runs -# on. -# -# web_page_url - The base URL for Mailman. This can be appended with, -# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing -# list. -# -# description - The brief description of the mailing list. -# -# info - The full description of the mailing list. -# -# cgiext - The extension added to CGI scripts. -# -# -digest_footer = """_______________________________________________ -%(real_name)s mailing list -%(real_name)s@%(host_name)s -%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s""" - -# When a new digest volume is started, the volume number is incremented -# and the issue number is reset to 1. -# -# legal values are: -# 0 = "Yearly" -# 1 = "Monthly" -# 2 = "Quarterly" -# 3 = "Weekly" -# 4 = "Daily" -digest_volume_frequency = 1 - -## Privacy options -# -# This section allows you to configure subscription and membership -# exposure policy. You can also control whether this list is public or -# not. See also the <a -# href="http://www.nilsstaerk.dk/mailman/admin/nilsstaerk/archive">Archival -# Options</a> section for separate archive-related privacy settings. - -# Advertise this list when people ask what lists are on this machine? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -advertised = 1 - -# Confirm (*) - email confirmation required Require approval - require -# list administrator approval for subscriptions Confirm and approve - -# both confirm and approve -# -# (*) when someone requests a subscription, Mailman sends them a notice -# with a unique subscription request number that they must reply to in -# order to subscribe. This prevents mischievous (or malicious) people -# from creating subscriptions for others without their consent. -# -# legal values are: -# 1 = "Confirm" -# 2 = "Require approval" -# 3 = "Confirm and approve" -subscribe_policy = 2 - -# When members want to leave a list, they will make an unsubscription -# request, either via the web or via email. Normally it is best for you -# to allow open unsubscriptions so that users can easily remove -# themselves from mailing lists (they get really upset if they can't get -# off lists!). -# -# For some lists though, you may want to impose moderator approval -# before an unsubscription request is processed. Examples of such lists -# include a corporate mailing list that all employees are required to be -# members of. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -unsubscribe_policy = 0 - -# Addresses in this list are banned outright from subscribing to this -# mailing list, with no further moderation required. Add addresses one -# per line; start the line with a ^ character to designate a regular -# expression match. -ban_list = ['ivan@divus.cz', 'arlene@divus.cz', 'news@divus.cz', 'postmaster@spamninja11.data393.net', 'postmaster@ideo.com', 'artes.plasticas@casamerica.es', 'mailer-daemon@yahoo.com', 'boxoffice@newschool.edu', 'symantec_antivirus_for_smtp_gateways@newschool.edu', 'exhibition@giger.cz', '138chriss@accesswave.com', '9gareth@accinternet.com', '6cassie@acadia.net', 'gpjth@hotmail.com', 'mqkiivztsa@yahoo.com', 'givyikheq@hotmail.com', 'kfrhrhny@hotmail.com', 'igcfeqxehzcz@hotmail.com', 'xqbjvh@hotmail.com', 'jmzccgrswwth@hotmail.com', 'marietta@access-one.com', 'divus@divus.cz', 'xmmsaaxt@yahoo.com', 'mailer-daemon@user2.cybercity.dk', 'baldip@yahoo.com', 'info@er-var.co.uk', 'nilsstaerk-request@jones.dk', 'xuzoerdcikv@yahoo.com', 'chester@about.com', 'lrejjuwf@hotmail.com', 'jjcvmqzdrco@oficinadecorreo.com', 'fkvxvudo@lmgpc.com', 'mailer-daemon@user3.cybercity.dk', '7janel@1st.net', 'info@sometimewaiting.co.uk', 'ugsjrq@calvarynaperville.org', 'vbusk@thesignshop.com', 'ejiyrhuvs@useglass.com', 'support@webworx.net.au', '29broderick@acadia.net', 'comunicacion@intereconomia.com', 'ehejcm@seethetrainer.com', 'yhkexjdnz@hotmail.com', 'info@tartsf.com', '34haskel@aaii.com', 'postmaster@roskilde-festival.dk', 'gftaezueajkzo@yahoo.com', 'ipyua@hotmail.com', 'nciwnuessqalw@yahoo.com', 'cfewpuhno@davidmbailey.com', '04freddie@abpn.com', '88arbenz@access-one.com', 'uqbsadon@todays.co.ke', '83hyman@acninc.net', 'ykiotnqx@msn.com', 'iebpbxrcwwg@slipfree.com', 'rdnkrvthhxr@hotmail.com', 'txidtnsrp@puebla.com', 'dvegxrizdpg@psiconsult.com', 'obrizuyranrhn@rootinstitute.com', 'socorro.mcintosh@earthlink.net', 'roslynaaas@archaeologist.com', 'quinnstarks@accountant.com', 'alfredoheath@publicist.com', 'dennyrowland@soon.com', 'margieknowles2p@rome.com', 'isabelleinman@soon.com', 'tknor@intelliteach.com', 'tl-sss@tl-sss.com', 'dhdgaywcirfd@moorekelly.freeserve.co.uk', 'issacmcintyre@iname.com', 'tknowlesdd@wrgb.com', 'tkwithecalhoun@billminder.com', 'augustaoakley@legislator.com', 'bmwoztx@lisecarabians.com', 'bennetthuerta@optician.com', 'donovanvelez@cliffhanger.com', 'destructadventure@popstar.com', 'melisajustice@hot-shot.com', 'billowbrownie@musician.org', 'vdlxbgy@ashoka.org', 'dieldrinbarium@adexec.com', 'srdgpooepm@bekkis.com', 'fnjaskracxizzt@navajoco.com', 'benblackberry@dr.com', 'lefvmkzn@ashlandhome.net', 'codetermineappertain@musician.org', 'dvorh@carfang.com', 'upcowdj@crfoods.com', 'borneasilomar@teacher.com', 'yfduyuy@butterworth.net', 'censorialcyrillic@earthling.net', 'wocecfar@concordances.com', 'copyrightbarberry@loveable.com', 'hbaaazhmlyk@ccsi-texas.com', 'hmpbiacund@christianaindustries.com', 'gxtfcsi@cbltech.com', 'bftkshsqb@f-i-s.com', 'brethrenbonfire@rouchotagreektranslations.nildram.co.uk', 'pwoairufn@earth.sunlink.net', 'aqu@fc.uhaul.com', 'n9tsprinkle@fortvicrv.com', 'catfishbirdie@earthlink.net', 'conjurecesium@rpdata.se', 'anthologyadmiration@rossword.org', 'cockeyeconcurrent@earthlink.net', 'gcmiedlcdu@flagworks.com', 'ralphmelisand@fichten.com', 'childlikebruce@royston.ie', 'mkybzwqziezbp@charlottecityclub.com', 'wlxryus@ceosuccess.com', 'livy@afol.com', 'daigle@karproducts.com', 'eugmosq@duesouth.net', 'cadfaelpurser@hnoc.org', 'compensableangelina@rpeer.com', 'diedeguo@icpusa.com', 'cineramaabysmal@earthlink.net', 'crematorychloroform@rotadasterras.com', 'mickukasand@azettler.com', 'tyripoc@cauzway.net', 'mzdndudepxgdnwuj@futbolsoccer.com', 'donataaborquez@homesoc.com', 'mill@esc9.net', 'hajnallack@ambenv.com', 'cameronbludgeon@earthlink.net', 'dnitfalna@tpnet.pl', 'andromac@arnett.com', 'deon@dragontek.com', 'hernu@atlantabev.com', 'tadeo@ariesgroupinc.com', 'xuekmv@drschore.com', 'nkrayfuwg@dulcinea.com', 'kelyesen@corcoran.com', 'chartcalibrate@earthlink.net', 'deoarahim@calvaryspringfield.org', 'koesitapiwa@fogelman-properties.com', 'gillesichab@centurian-surplus.com', 'alireacarlen@advancedrelocation.com', 'dudaucormac@alliedwelding.net', 'mxbrvrccf@schneis.de', 'decreasediameter@earthlink.net', 'fleshman@finaltouchvideo.com', 'znjuy@gaoland.net', 'true@dancehallminded.com', 'maspeacoc@hallmarkhomes-sav.com', 'brier@corpcomm.net', 'heffer@allprimeproducts.com', 'hdrumxynd@rr.com', 'rwlrtitc@iplannetworks.net', 'lizu@bma.com', 'jpfeguqnb@tpnet.pl', 'verrierykud@bcm.com', 'srakw@wanadoo.fr', 'clemilo@bonitabaygroup.com', 'roxann@kdix.com', 'swishera@changeconsultants.com', 'calumnyband@round-house.org', 'dravenrigg@adventis.com', 'ayzhfczpn@cdonline.dk', 'ymclapboard@carcumb.com', 'yfillegible@aron01.jany.gs.com', 'kisha@antaresiti.com', 'nievypohlm@covance.com', 'tiphavillica@gourmetconnection.com', 'belfuvolkan@d2bt01.jda002.net', 'qlfpjnpb@diversityinc.com', 'muirhet@housemancc.com', 'careful.congenital@rothauge.com', 'leporemisi@allured.com', 'lldepth@boxofficereport.com', 'bonaventurecerulean@rpm4parts.com', 'yaludurkee@groppelong.com', 'virabunt@cafe-express.com', 'iucomposition@briangrossfineart.com', 'jenae@chyron.com', 'lalage@abounding.org', 'reganai@harveststates.com', 'vconsort1@baiworld.com', 'bootstrapdeltoid@royalgreenjackets.co.uk', 'apdlnct@e-sonic.com', 'tuomo@hsca.com', 'colbo@fppp.org', 'valladistefan@advanced-driving.net', 'zslyhmbo@engpwr.com', 'koldobi@alloysystems.com', 'cemarinade@eventrentals.com', 'hanes@kitchenaid.com', 'nearyavrah@albany.com', 'gascay@advrenaltech.com', 'mccmorris@allamericanshops.com', 'nxwqrc@fieldingconstruction.com', 'roushinand@innisbrook.com', 'qwdarm@peer.pl', 'prakashugant@gasmark.com', 'alanag3lusk@townhall.com', 'blsnar@tpnet.pl', 'holsey@hadenstanziale.com', 'jhansen@scc.net', 'bovinebookcase@royalguardfence.com', 'lightaavram@commeng.com', 'marleneichurt@tropos.com', 'classarchfool@rowan.pl', 'repassguido@hawkeyesecurity-ins.com', 'whdsz@tpnet.pl', 'brakemanambuscade@rowebots.com', 'tabeamcclusky@eurekanet.com', 'mckeever@ownlife.com', 'skye@adcc.com', 'sparksuhiltrud@hammersplastic.com', 'shaeukova@eastbrookhomes.com', 'georginab3fournier@bartleby.com', 'algolaviatrix@rouwen.de', 'disccurvilinear@rpsb.net', 'allant@fuse.net', 'mcchesu@aimt.com', 'decy@bullseye-glass.com', 'eloisefrmesser@inflammationresearch.org', 'braggingbrigadier@royalsantaana.com', 'corneliatceddy@kidshealth.org', 'fbrmemsct@tie.cl', 'jsqrkrh@comcast.net', 'aeronwenakur@fnbada.com', 'ututfaobt@tiscali.fr', 'pthpnmyb@comcast.net', 'ilhixryr@estec.com', 'nvyfm@pgsm.hu', 'ashmenbarkeep@rotail.com', 'ramon@fspnet.com', 'bushwhackaficionado@rovaldi.com', 'xtwnjx@eos.esg.eng.sun.com', 'ydvwl@dumeco.com', 'nadja@cme.com', 'xjtnexgiox@taberindustries.com', 'giannayosmun@flexhaul.com', 'thomassonabeni@antec.com', 'lnanimosity@abmt.com', 'dcttabd@stwconn.com', 'aloysiussultan@breitdrescherbreit.com', 'lauracolucci@breoconsulting.com', 'fabian@fnol.net', 'fsolely@bergpipe.com', 'lsbegrh@rima-tde.net', 'haymiflavio@eaw.com', 'pirittay@kalkustom.com', 'cos@cookie.com', 'bypathcotta@earthlink.net', 'jsdqduznys@commsysinc.com', 'brae@doall.com', 'zqcuxknb@mindspring.com', 'farringt@asus.com', 'klyazdkmy@divo.net', 'lippoldtemp@agla.com', 'ldcalculator@asbloan.com', 'kylealcon@bipsnm.com', 'aregular@magnis.net', 'lvwxydwmi@fbrnet.com', 'kezvmcn@abecohen.com', 'van@childrensinstitute.org', 'moxkwzjmofl@rinet.ru', 'gwnwomohd@datachem.com', 'congruentback@royalterracehotel.co.uk', 'jolliff@atsalaska.com', 'kiranaplum@fcfinsurance.com', 'kesvanc@adjmail.com', 'morgancon@csw.net', 'swnntts@d-e-m-o.com', 'dorianbrunel@kbl.pactec.net', 'pap@baillie.com', 'dawooda@asde.net', 'keltner@amtechmicro.com', 'iacchu@lksamm.com', 'mayhall@cardsource.com', 'kittye@joplinglobe.com', 'chaseu@lonabaugh.com', 'harpermarylee@anaconda.com.au', 'bkechsibida@embarqhsd.net', 'laram2granger@tenthdimension.com', 'barnetabide@royalbank.co.zw', 'bonniem@avm.de', 'ufragile@maallen.com', 'zvjaihejxpf@usis.net', 'mull@burke.org', 'chartiera@healthwisdom.com', 'crailway@lstreb.com', 'aeibmjt@syscon-intl.com', 'bhymkzpym@xtria.com', 'ptbsrmgh@withatwist.com', 'aeneasdelphinus@rovaria.com', 'abstinentallegheny@rpscomm.com', 'carperi@corrcomm.net', 'ctracy@linkny.com', 'beneficecottonseed@royalinvestments.com', 'stultz@adventureunlimited.com', 'taukabbf@vhv.com', 'dana_54@loa.com', 'ulyssestheresa@wikipedia.org', 'stultzi@banknorth.com', 'binderybellyfullc@jewelmusic.com', 'crossroadbarometer@rowneyconsulting.com', 'rjzkvitev@wemsdiet.com', 'jehoiau@aek.com', 'darnalvarez@rr.collumbus.com', 'mpknltsee@templealiyah.com', 'boredomcalypso@roughgroove.com', 'lxfogto@smt.net', 'iwhtccks@therural.net', 'swenjwoffy@upromise.com', 'ozltkruc@visitedmondok.com', 'nfikbpr@somero.com', 'usaubozty@westquality.com', 'info@chromos.de', 'yphijdqwq@solutionsie.com', 'ambercranium@roullier.com.uy', 'aaugust@ncfbins.com', 'asinineanthem@rppeo.org', 'bibbso@lexgen.com', 'associablealameda@roxcar.com.br', 'arubachauncey@rquode.com', 'assumeaden@rotterdams-handelshuis.nl', 'acknowledgeblazon@royallender.com', 'blomqmichel@iqmail.net', 'bitwisebernardino@rqka1.mp', 'bbbbbadgcffdgc@caringforyou.uk.com', 'amau@ipsww.com', 'accrualbismuth@roussinwaechter.com', 'anticcranelike@royutah.com', 'arskimqwbm@britishwatchcompany.com', 'beanea@bentonandassoc.com', 'bhggpmdtm@photo-sciences.com', 'bivalveadjoin@route24.de', 'alexislmorn@uvhippo.com', 'anarchdefensive@royramm.no', 'bgefcgcfca@cassavarecords.com', 'begffafc@careercommandpost.com', 'besottedchristendom@routestolearning.ca'] - -# When set, the list of subscribers is protected by member or admin -# password authentication. -# -# legal values are: -# 0 = "Anyone" -# 1 = "List members" -# 2 = "List admin only" -private_roster = 2 - -# Setting this option causes member email addresses to be transformed -# when they are presented on list web pages (both in text and as links), -# so they're not trivially recognizable as email addresses. The -# intention is to prevent the addresses from being snarfed up by -# automated web scanners for use by spammers. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -obscure_addresses = 0 - -## Privacy options -# -# When a message is posted to the list, a series of moderation steps are -# take to decide whether the a moderator must first approve the message -# or not. This section contains the controls for moderation of both -# member and non-member postings. -# -# <p>Member postings are held for moderation if their <b>moderation -# flag</b> is turned on. You can control whether member postings are -# moderated by default or not. -# -# <p>Non-member postings can be automatically <a -# href="?VARHELP=privacy/sender/accept_these_nonmembers" >accepted</a>, -# <a href="?VARHELP=privacy/sender/hold_these_nonmembers">held for -# moderation</a>, <a -# href="?VARHELP=privacy/sender/reject_these_nonmembers" >rejected</a> -# (bounced), or <a -# href="?VARHELP=privacy/sender/discard_these_nonmembers" -# >discarded</a>, either individually or as a group. Any posting from a -# non-member who is not explicitly accepted, rejected, or discarded, -# will have their posting filtered by the <a -# href="?VARHELP=privacy/sender/generic_nonmember_action">general -# non-member rules</a>. -# -# <p>In the text boxes below, add one address per line; start the line -# with a ^ character to designate a <a href= -# "http://www.python.org/doc/current/lib/module-re.html" >Python regular -# expression</a>. When entering backslashes, do so as if you were using -# Python raw strings (i.e. you generally just use a single backslash). -# -# <p>Note that non-regexp matches are always done first. - -# Each list member has a moderation flag which says whether messages -# from the list member can be posted directly to the list, or must first -# be approved by the list moderator. When the moderation flag is turned -# on, list member postings must be approved first. You, the list -# administrator can decide whether a specific individual's postings will -# be moderated or not. -# -# When a new member is subscribed, their initial moderation flag takes -# its value from this option. Turn this option off to accept member -# postings by default. Turn this option on to, by default, moderate -# member postings first. You can always manually set an individual -# member's moderation bit by using the membership management screens. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -default_member_moderation = 1 - -# Hold -- this holds the message for approval by the list moderators. -# -# Reject -- this automatically rejects the message by sending a bounce -# notice to the post's author. The text of the bounce notice can be <a -# href="?VARHELP=privacy/sender/member_moderation_notice" >configured by -# you. -# -# Discard -- this simply discards the message, with no notice sent to -# the post's author. -# -# -# legal values are: -# 0 = "Hold" -# 1 = "Reject" -# 2 = "Discard" -member_moderation_action = 0 - -# Text to include in any <a -# href="?VARHELP/privacy/sender/member_moderation_action" >rejection -# notice to be sent to moderated members who post to this list. -member_moderation_notice = '' - -# Postings from any of these non-members will be automatically accepted -# with no further moderation applied. Add member addresses one per -# line; start the line with a ^ character to designate a regular -# expression match. -accept_these_nonmembers = [] - -# Postings from any of these non-members will be immediately and -# automatically held for moderation by the list moderators. The sender -# will receive a notification message which will allow them to cancel -# their held message. Add member addresses one per line; start the line -# with a ^ character to designate a regular expression match. -hold_these_nonmembers = [] - -# Postings from any of these non-members will be automatically rejected. -# In other words, their messages will be bounced back to the sender with -# a notification of automatic rejection. This option is not appropriate -# for known spam senders; their messages should be <a -# href="?VARHELP=privacy/sender/discard_these_nonmembers" >automatically -# discarded. -# -# Add member addresses one per line; start the line with a ^ character -# to designate a regular expression match. -reject_these_nonmembers = ['news@divus.cz', 'artes.plasticas@casamerica.es', 'mailer-daemon@yahoo.com', 'boxoffice@newschool.edu', 'symantec_antivirus_for_smtp_gateways@newschool.edu', 'exhibition@giger.cz', '138chriss@accesswave.com', '9gareth@accinternet.com', 'ivan@divus.cz', '6cassie@acadia.net', 'gpjth@hotmail.com', 'mqkiivztsa@yahoo.com', 'givyikheq@hotmail.com', 'mqkiivztsa@yahoo.com', 'givyikheq@hotmail.com', 'kfrhrhny@hotmail.com', 'igcfeqxehzcz@hotmail.com', 'xqbjvh@hotmail.com', 'jmzccgrswwth@hotmail.com', 'marietta@access-one.com', 'divus@divus.cz', 'xmmsaaxt@yahoo.com', 'mailer-daemon@user2.cybercity.dk', 'baldip@yahoo.com', 'info@er-var.co.uk', 'nilsstaerk-request@jones.dk', 'xuzoerdcikv@yahoo.com', 'chester@about.com', 'lrejjuwf@hotmail.com', 'jjcvmqzdrco@oficinadecorreo.com', 'fkvxvudo@lmgpc.com', 'mailer-daemon@user3.cybercity.dk', '7janel@1st.net', 'info@sometimewaiting.co.uk', 'ugsjrq@calvarynaperville.org', 'vbusk@thesignshop.com', 'ejiyrhuvs@useglass.com', 'support@webworx.net.au', '29broderick@acadia.net', 'comunicacion@intereconomia.com', 'ehejcm@seethetrainer.com', 'eyrjoje@tofi.de', 'yhkexjdnz@hotmail.com', 'info@tartsf.com', 'postmaster@roskilde-festival.dk', 'gftaezueajkzo@yahoo.com', 'ipyua@hotmail.com', 'nciwnuessqalw@yahoo.com', 'cfewpuhno@davidmbailey.com', '04freddie@abpn.com', '88arbenz@access-one.com', 'uqbsadon@todays.co.ke', '83hyman@acninc.net', 'iebpbxrcwwg@slipfree.com', 'rdnkrvthhxr@hotmail.com', 'txidtnsrp@puebla.com', 'dvegxrizdpg@psiconsult.com', 'obrizuyranrhn@rootinstitute.com', 'socorro.mcintosh@earthlink.net', 'roslynaaas@archaeologist.com', 'quinnstarks@accountant.com', 'alfredoheath@publicist.com', 'dennyrowland@soon.com', 'margieknowles2p@rome.com', 'isabelleinman@soon.com', 'tknor@intelliteach.com', 'tl-sss@tl-sss.com', 'dhdgaywcirfd@moorekelly.freeserve.co.uk', 'issacmcintyre@iname.com', 'tknowlesdd@wrgb.com', 'tkwithecalhoun@billminder.com', 'augustaoakley@legislator.com', 'bmwoztx@lisecarabians.com', 'bennetthuerta@optician.com', 'donovanvelez@cliffhanger.com', 'destructadventure@popstar.com', 'melisajustice@hot-shot.com', 'vdlxbgy@ashoka.org', 'dieldrinbarium@adexec.com', 'srdgpooepm@bekkis.com', 'fnjaskracxizzt@navajoco.com', 'benblackberry@dr.com', 'lefvmkzn@ashlandhome.net', 'codetermineappertain@musician.org', 'dvorh@carfang.com', 'upcowdj@crfoods.com', 'borneasilomar@teacher.com', 'yfduyuy@butterworth.net', 'censorialcyrillic@earthling.net', 'wocecfar@concordances.com', 'copyrightbarberry@loveable.com', 'hbaaazhmlyk@ccsi-texas.com', 'hmpbiacund@christianaindustries.com', 'gxtfcsi@cbltech.com', 'bftkshsqb@f-i-s.com', 'brethrenbonfire@rouchotagreektranslations.nildram.co.uk', 'pwoairufn@earth.sunlink.net', 'aqu@fc.uhaul.com', 'n9tsprinkle@fortvicrv.com', 'catfishbirdie@earthlink.net', 'conjurecesium@rpdata.se', 'anthologyadmiration@rossword.org', 'cockeyeconcurrent@earthlink.net', 'gcmiedlcdu@flagworks.com', 'ralphmelisand@fichten.com', 'childlikebruce@royston.ie', 'mkybzwqziezbp@charlottecityclub.com', 'wlxryus@ceosuccess.com', 'livy@afol.com', 'daigle@karproducts.com', 'eugmosq@duesouth.net', 'cadfaelpurser@hnoc.org', 'compensableangelina@rpeer.com', 'diedeguo@icpusa.com', 'cineramaabysmal@earthlink.net', 'crematorychloroform@rotadasterras.com', 'mickukasand@azettler.com', 'tyripoc@cauzway.net', 'mzdndudepxgdnwuj@futbolsoccer.com', 'donataaborquez@homesoc.com', 'mill@esc9.net', 'hajnallack@ambenv.com', 'cameronbludgeon@earthlink.net', 'dnitfalna@tpnet.pl', 'andromac@arnett.com', 'deon@dragontek.com', 'hernu@atlantabev.com', 'tadeo@ariesgroupinc.com', 'xuekmv@drschore.com', 'nkrayfuwg@dulcinea.com', 'kelyesen@corcoran.com', 'chartcalibrate@earthlink.net', 'deoarahim@calvaryspringfield.org', 'koesitapiwa@fogelman-properties.com', 'gillesichab@centurian-surplus.com', 'alireacarlen@advancedrelocation.com', 'dudaucormac@alliedwelding.net', 'mxbrvrccf@schneis.de', 'decreasediameter@earthlink.net', 'fleshman@finaltouchvideo.com', 'znjuy@gaoland.net', 'true@dancehallminded.com', 'maspeacoc@hallmarkhomes-sav.com', 'brier@corpcomm.net', 'heffer@allprimeproducts.com', 'hdrumxynd@rr.com', 'rwlrtitc@iplannetworks.net', 'lizu@bma.com', 'jpfeguqnb@tpnet.pl', 'verrierykud@bcm.com', 'srakw@wanadoo.fr', 'clemilo@bonitabaygroup.com', 'roxann@kdix.com', 'swishera@changeconsultants.com', 'calumnyband@round-house.org', 'dravenrigg@adventis.com', 'ayzhfczpn@cdonline.dk', 'ymclapboard@carcumb.com', 'yfillegible@aron01.jany.gs.com', 'kisha@antaresiti.com', 'nievypohlm@covance.com', 'tiphavillica@gourmetconnection.com', 'belfuvolkan@d2bt01.jda002.net', 'qlfpjnpb@diversityinc.com', 'muirhet@housemancc.com', 'careful.congenital@rothauge.com', 'leporemisi@allured.com', 'lldepth@boxofficereport.com', 'bonaventurecerulean@rpm4parts.com', 'yaludurkee@groppelong.com', 'virabunt@cafe-express.com', 'jenae@chyron.com', 'lalage@abounding.org', 'reganai@harveststates.com', 'vconsort1@baiworld.com', 'bootstrapdeltoid@royalgreenjackets.co.uk', 'apdlnct@e-sonic.com', 'tuomo@hsca.com', 'colbo@fppp.org', 'valladistefan@advanced-driving.net', 'zslyhmbo@engpwr.com', 'koldobi@alloysystems.com', 'cemarinade@eventrentals.com', 'hanes@kitchenaid.com', 'nearyavrah@albany.com', 'gascay@advrenaltech.com', 'mccmorris@allamericanshops.com', 'nxwqrc@fieldingconstruction.com', 'roushinand@innisbrook.com', 'qwdarm@peer.pl', 'prakashugant@gasmark.com', 'alanag3lusk@townhall.com', 'blsnar@tpnet.pl', 'holsey@hadenstanziale.com', 'jhansen@scc.net', 'bovinebookcase@royalguardfence.com', 'ogricn@eletronet.com', 'lightaavram@commeng.com', 'marleneichurt@tropos.com', 'classarchfool@rowan.pl', 'repassguido@hawkeyesecurity-ins.com', 'whdsz@tpnet.pl', 'brakemanambuscade@rowebots.com', 'tabeamcclusky@eurekanet.com', 'mckeever@ownlife.com', 'skye@adcc.com', 'sparksuhiltrud@hammersplastic.com', 'shaeukova@eastbrookhomes.com', 'georginab3fournier@bartleby.com', 'algolaviatrix@rouwen.de', 'disccurvilinear@rpsb.net', 'allant@fuse.net', 'lewinosatterlee@isea.org', 'mcchesu@aimt.com', 'decy@bullseye-glass.com', 'eloisefrmesser@inflammationresearch.org', 'braggingbrigadier@royalsantaana.com', 'corneliatceddy@kidshealth.org', 'fbrmemsct@tie.cl', 'jsqrkrh@comcast.net', 'aeronwenakur@fnbada.com', 'ututfaobt@tiscali.fr', 'pthpnmyb@comcast.net', 'ilhixryr@estec.com', 'nvyfm@pgsm.hu', 'ashmenbarkeep@rotail.com', 'ramon@fspnet.com', 'bushwhackaficionado@rovaldi.com', 'xtwnjx@eos.esg.eng.sun.com', 'ydvwl@dumeco.com', 'nadja@cme.com', 'xjtnexgiox@taberindustries.com', 'giannayosmun@flexhaul.com', 'thomassonabeni@antec.com', 'lnanimosity@abmt.com', 'dcttabd@stwconn.com', 'aloysiussultan@breitdrescherbreit.com', 'lauracolucci@breoconsulting.com', 'fabian@fnol.net', 'fsolely@bergpipe.com', 'lsbegrh@rima-tde.net', 'haymiflavio@eaw.com', 'pirittay@kalkustom.com', 'pearcujoden@agg.com', 'cos@cookie.com', 'bypathcotta@earthlink.net', 'jsdqduznys@commsysinc.com', 'brae@doall.com', 'zqcuxknb@mindspring.com', 'farringt@asus.com', 'klyazdkmy@divo.net', 'lippoldtemp@agla.com', 'ldcalculator@asbloan.com', 'kylealcon@bipsnm.com', 'aregular@magnis.net', 'kezvmcn@abecohen.com', 'van@childrensinstitute.org', 'sselb@bwoodtx.com', 'moxkwzjmofl@rinet.ru', 'gwnwomohd@datachem.com', 'congruentback@royalterracehotel.co.uk', 'jolliff@atsalaska.com', 'kiranaplum@fcfinsurance.com', 'kesvanc@adjmail.com', 'morgancon@csw.net', 'swnntts@d-e-m-o.com', 'dorianbrunel@kbl.pactec.net', 'pap@baillie.com', 'dawooda@asde.net', 'keltner@amtechmicro.com', 'iacchu@lksamm.com', 'mayhall@cardsource.com', 'kittye@joplinglobe.com', 'chaseu@lonabaugh.com', 'harpermarylee@anaconda.com.au', 'bkechsibida@embarqhsd.net', 'laram2granger@tenthdimension.com', 'barnetabide@royalbank.co.zw', 'gascay@advrenaltech.com', 'mccmorris@allamericanshops.com', 'nxwqrc@fieldingconstruction.com', 'roushinand@innisbrook.com', 'qwdarm@peer.pl', 'prakashugant@gasmark.com', 'alanag3lusk@townhall.com', 'blsnar@tpnet.pl', 'holsey@hadenstanziale.com', 'jhansen@scc.net', 'bovinebookcase@royalguardfence.com', 'ogricn@eletronet.com', 'lightaavram@commeng.com', 'marleneichurt@tropos.com', 'classarchfool@rowan.pl', 'repassguido@hawkeyesecurity-ins.com', 'whdsz@tpnet.pl', 'brakemanambuscade@rowebots.com', 'tabeamcclusky@eurekanet.com', 'mckeever@ownlife.com', 'skye@adcc.com', 'sparksuhiltrud@hammersplastic.com', 'shaeukova@eastbrookhomes.com', 'georginab3fournier@bartleby.com', 'algolaviatrix@rouwen.de', 'disccurvilinear@rpsb.net', 'allant@fuse.net', 'lewinosatterlee@isea.org', 'mcchesu@aimt.com', 'decy@bullseye-glass.com', 'eloisefrmesser@inflammationresearch.org', 'braggingbrigadier@royalsantaana.com', 'corneliatceddy@kidshealth.org', 'fbrmemsct@tie.cl', 'jsqrkrh@comcast.net', 'aeronwenakur@fnbada.com', 'ututfaobt@tiscali.fr', 'pthpnmyb@comcast.net', 'ilhixryr@estec.com', 'nvyfm@pgsm.hu', 'ashmenbarkeep@rotail.com', 'ramon@fspnet.com', 'bushwhackaficionado@rovaldi.com', 'xtwnjx@eos.esg.eng.sun.com', 'ydvwl@dumeco.com', 'nadja@cme.com', 'xjtnexgiox@taberindustries.com', 'giannayosmun@flexhaul.com', 'thomassonabeni@antec.com', 'lnanimosity@abmt.com', 'dcttabd@stwconn.com', 'aloysiussultan@breitdrescherbreit.com', 'lauracolucci@breoconsulting.com', 'fabian@fnol.net', 'fsolely@bergpipe.com', 'lsbegrh@rima-tde.net', 'haymiflavio@eaw.com', 'pirittay@kalkustom.com', 'pearcujoden@agg.com', 'cos@cookie.com', 'bypathcotta@earthlink.net', 'jsdqduznys@commsysinc.com', 'brae@doall.com', 'zqcuxknb@mindspring.com', 'farringt@asus.com', 'klyazdkmy@divo.net', 'lippoldtemp@agla.com', 'ldcalculator@asbloan.com', 'kylealcon@bipsnm.com', 'aregular@magnis.net', 'kezvmcn@abecohen.com', 'van@childrensinstitute.org', 'sselb@bwoodtx.com', 'moxkwzjmofl@rinet.ru', 'gwnwomohd@datachem.com', 'congruentback@royalterracehotel.co.uk', 'jolliff@atsalaska.com', 'kiranaplum@fcfinsurance.com', 'kesvanc@adjmail.com', 'morgancon@csw.net', 'swnntts@d-e-m-o.com', 'dorianbrunel@kbl.pactec.net', 'pap@baillie.com', 'dawooda@asde.net', 'keltner@amtechmicro.com', 'iacchu@lksamm.com', 'mayhall@cardsource.com', 'kittye@joplinglobe.com', 'chaseu@lonabaugh.com', 'harpermarylee@anaconda.com.au', 'bkechsibida@embarqhsd.net', 'laram2granger@tenthdimension.com', 'barnetabide@royalbank.co.zw', 'bonniem@avm.de', 'ufragile@maallen.com', 'zvjaihejxpf@usis.net', 'mull@burke.org', 'chartiera@healthwisdom.com', 'crailway@lstreb.com', 'aeibmjt@syscon-intl.com', 'bhymkzpym@xtria.com', 'ptbsrmgh@withatwist.com', 'aeneasdelphinus@rovaria.com', 'abstinentallegheny@rpscomm.com', 'carperi@corrcomm.net', 'ctracy@linkny.com', 'beneficecottonseed@royalinvestments.com', 'stultz@adventureunlimited.com', 'taukabbf@vhv.com', 'dana_54@loa.com', 'ulyssestheresa@wikipedia.org', 'stultzi@banknorth.com', 'binderybellyfullc@jewelmusic.com', 'crossroadbarometer@rowneyconsulting.com', 'rjzkvitev@wemsdiet.com', 'gqmevwqcjja@verizon.com', 'jehoiau@aek.com', 'darnalvarez@rr.collumbus.com', 'mpknltsee@templealiyah.com', 'hedinychiz@dp-center.com', 'boredomcalypso@roughgroove.com', 'lxfogto@smt.net', 'iwhtccks@therural.net', 'ozltkruc@visitedmondok.com', 'nfikbpr@somero.com', 'peebrraqgnf@telecen.net', 'usaubozty@westquality.com', 'info@chromos.de', 'swenjwoffy@upromise.com', 'yphijdqwq@solutionsie.com', 'ambercranium@roullier.com.uy', 'asinineanthem@rppeo.org', 'bibbso@lexgen.com', 'associablealameda@roxcar.com.br', 'arubachauncey@rquode.com', 'assumeaden@rotterdams-handelshuis.nl', 'acknowledgeblazon@royallender.com', 'blomqmichel@iqmail.net', 'bitwisebernardino@rqka1.mp', 'bbbbbadgcffdgc@caringforyou.uk.com', 'amau@ipsww.com', 'accrualbismuth@roussinwaechter.com', 'anticcranelike@royutah.com', 'arskimqwbm@britishwatchcompany.com', 'beanea@bentonandassoc.com', 'bhggpmdtm@photo-sciences.com', 'bivalveadjoin@route24.de', 'alexislmorn@uvhippo.com', 'anarchdefensive@royramm.no', 'bgefcgcfca@cassavarecords.com', 'begffafc@careercommandpost.com', 'besottedchristendom@routestolearning.ca'] - -# Postings from any of these non-members will be automatically -# discarded. That is, the message will be thrown away with no further -# processing or notification. The sender will not receive a -# notification or a bounce, however the list moderators can optionally -# <a href="?VARHELP=privacy/sender/forward_auto_discards" >receive -# copies of auto-discarded messages.. -# -# Add member addresses one per line; start the line with a ^ character -# to designate a regular expression match. -discard_these_nonmembers = ['lvwxydwmi@fbrnet.com', 'lvwxydwmi@fbrnet.com', 'aaugust@ncfbins.com'] - -# When a post from a non-member is received, the message's sender is -# matched against the list of explicitly <a -# href="?VARHELP=privacy/sender/accept_these_nonmembers" >accepted, -# held, <a href="?VARHELP=privacy/sender/reject_these_nonmembers" -# >rejected (bounced), and <a -# href="?VARHELP=privacy/sender/discard_these_nonmembers" >discarded -# addresses. If no match is found, then this action is taken. -# -# legal values are: -# 0 = "Accept" -# 1 = "Hold" -# 2 = "Reject" -# 3 = "Discard" -generic_nonmember_action = 1 - -# Should messages from non-members, which are automatically discarded, -# be forwarded to the list moderator? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -forward_auto_discards = 1 - -# Text to include in any rejection notice to be sent to non-members who -# post to this list. This notice can include the list's owner address by -# %(listowner)s and replaces the internally crafted default message. -nonmember_rejection_notice = '' - -## Privacy options -# -# This section allows you to configure various filters based on the -# recipient of the message. - -# Many (in fact, most) spams do not explicitly name their myriad -# destinations in the explicit destination addresses - in fact often the -# To: field has a totally bogus address for obfuscation. The constraint -# applies only to the stuff in the address before the '@' sign, but -# still catches all such spams. -# -# The cost is that the list will not accept unhindered any postings -# relayed from other addresses, unless -# -# -# The relaying address has the same name, or -# -# The relaying address name is included on the options that specifies -# acceptable aliases for the list. -# -# -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -require_explicit_destination = 1 - -# Alternate addresses that are acceptable when -# `require_explicit_destination' is enabled. This option takes a list -# of regular expressions, one per line, which is matched against every -# recipient address in the message. The matching is performed with -# Python's re.match() function, meaning they are anchored to the start -# of the string. -# -# For backwards compatibility with Mailman 1.1, if the regexp does not -# contain an `@', then the pattern is matched against just the local -# part of the recipient address. If that match fails, or if the pattern -# does contain an `@', then the pattern is matched against the entire -# recipient address. -# -# Matching against the local part is deprecated; in a future release, -# the pattern will always be matched against the entire recipient -# address. -acceptable_aliases = '' - -# If a posting has this number, or more, of recipients, it is held for -# admin approval. Use 0 for no ceiling. -max_num_recipients = 10 - -## Privacy options -# -# This section allows you to configure various anti-spam filters posting -# filters, which can help reduce the amount of spam your list members -# end up receiving. -# - -# Each header filter rule has two parts, a list of regular expressions, -# one per line, and an action to take. Mailman matches the message's -# headers against every regular expression in the rule and if any match, -# the message is rejected, held, or discarded based on the action you -# specify. Use Defer to temporarily disable a rule. -# -# You can have more than one filter rule for your list. In that case, -# each rule is matched in turn, with processing stopped after the first -# match. -# -# Note that headers are collected from all the attachments (except for -# the mailman administrivia message) and matched against the regular -# expressions. With this feature, you can effectively sort out messages -# with dangerous file types or file name extensions. -header_filter_rules = [] - -# Use this option to prohibit posts according to specific header values. -# The target value is a regular-expression for matching against the -# specified header. The match is done disregarding letter case. Lines -# beginning with '#' are ignored as comments. -# -# For example:to: .*@public.com says to hold all postings with a To: -# mail header containing '@public.com' anywhere among the addresses. -# -# Note that leading whitespace is trimmed from the regexp. This can be -# circumvented in a number of ways, e.g. by escaping or bracketing it. -bounce_matching_headers = """# Lines that *start* with a '#' are comments. -to: friend@public.com -message-id: relay.comanche.denmark.eu -from: list@listme.com -from: .*@uplinkpro.com""" - -## Bounce options -# -# These policies control the automatic bounce processing system in -# Mailman. Here's an overview of how it works. -# -# <p>When a bounce is received, Mailman tries to extract two pieces of -# information from the message: the address of the member the message -# was intended for, and the severity of the problem causing the bounce. -# The severity can be either <em>hard</em> or <em>soft</em> meaning -# either a fatal error occurred, or a transient error occurred. When in -# doubt, a hard severity is used. -# -# <p>If no member address can be extracted from the bounce, then the -# bounce is usually discarded. Otherwise, each member is assigned a -# <em>bounce score</em> and every time we encounter a bounce from this -# member we increment the score. Hard bounces increment by 1 while soft -# bounces increment by 0.5. We only increment the bounce score once per -# day, so even if we receive ten hard bounces from a member per day, -# their score will increase by only 1 for that day. -# -# <p>When a member's bounce score is greater than the <a -# href="?VARHELP=bounce/bounce_score_threshold">bounce score -# threshold</a>, the subscription is disabled. Once disabled, the -# member will not receive any postings from the list until their -# membership is explicitly re-enabled (either by the list administrator -# or the user). However, they will receive occasional reminders that -# their membership has been disabled, and these reminders will include -# information about how to re-enable their membership. -# -# <p>You can control both the <a -# href="?VARHELP=bounce/bounce_you_are_disabled_warnings">number of -# reminders</a> the member will receive and the <a -# href="?VARHELP=bounce/bounce_you_are_disabled_warnings_interval" -# >frequency</a> with which these reminders are sent. -# -# <p>There is one other important configuration variable; after a -# certain period of time -- during which no bounces from the member are -# received -- the bounce information is <a -# href="?VARHELP=bounce/bounce_info_stale_after">considered stale</a> -# and discarded. Thus by adjusting this value, and the score threshold, -# you can control how quickly bouncing members are disabled. You should -# tune both of these to the frequency and traffic volume of your list. - -# By setting this value to No, you disable all automatic bounce -# processing for this list, however bounce messages will still be -# discarded so that the list administrator isn't inundated with them. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -bounce_processing = 1 - -# Each subscriber is assigned a bounce score, as a floating point -# number. Whenever Mailman receives a bounce from a list member, that -# member's score is incremented. Hard bounces (fatal errors) increase -# the score by 1, while soft bounces (temporary errors) increase the -# score by 0.5. Only one bounce per day counts against a member's -# score, so even if 10 bounces are received for a member on the same -# day, their score will increase by just 1. -# -# This variable describes the upper limit for a member's bounce score, -# above which they are automatically disabled, but not removed from the -# mailing list. -bounce_score_threshold = 5.0 - -# The number of days after which a member's bounce information is -# discarded, if no new bounces have been received in the interim. This -# value must be an integer. -bounce_info_stale_after = 7 - -# How many Your Membership Is Disabled warnings a disabled member should -# get before their address is removed from the mailing list. Set to 0 -# to immediately remove an address from the list once their bounce score -# exceeds the threshold. This value must be an integer. -bounce_you_are_disabled_warnings = 3 - -# The number of days between sending the Your Membership Is Disabled -# warnings. This value must be an integer. -bounce_you_are_disabled_warnings_interval = 7 - -# While Mailman's bounce detector is fairly robust, it's impossible to -# detect every bounce format in the world. You should keep this -# variable set to Yes for two reasons: 1) If this really is a permanent -# bounce from one of your members, you should probably manually remove -# them from your list, and 2) you might want to send the message on to -# the Mailman developers so that this new format can be added to its -# known set. -# -# If you really can't be bothered, then set this variable to No and all -# non-detected bounces will be discarded without further processing. -# -# Note: This setting will also affect all messages sent to your list's -# -admin address. This address is deprecated and should never be used, -# but some people may still send mail to this address. If this happens, -# and this variable is set to No those messages too will get discarded. -# You may want to set up an autoresponse message for email to the -owner -# and -admin address. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -bounce_unrecognized_goes_to_list_owner = 1 - -# By setting this value to No, you turn off notification messages that -# are normally sent to the list owners when a member's delivery is -# disabled due to excessive bounces. An attempt to notify the member -# will always be made. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -bounce_notify_owner_on_disable = 1 - -# By setting this value to No, you turn off notification messages that -# are normally sent to the list owners when a member is unsubscribed due -# to excessive bounces. An attempt to notify the member will always be -# made. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -bounce_notify_owner_on_removal = 1 - -## Archive options -# -# List traffic archival policies. - -# Archive messages? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -archive = 0 - -# Is archive file source for public or private archival? -# -# legal values are: -# 0 = "public" -# 1 = "private" -archive_private = 0 - -# How often should a new archive volume be started? -# -# legal values are: -# 0 = "Yearly" -# 1 = "Monthly" -# 2 = "Quarterly" -# 3 = "Weekly" -# 4 = "Daily" -archive_volume_frequency = 2 - -## Gateway options -# -# Mail-to-News and News-to-Mail gateway services. - -# This value may be either the name of your news server, or optionally -# of the format name:port, where port is a port number. -# -# The news server is not part of Mailman proper. You have to already -# have access to an NNTP server, and that NNTP server must recognize the -# machine this mailing list runs on as a machine capable of reading and -# posting news. -nntp_host = '' - -# The name of the Usenet group to gateway to and/or from. -linked_newsgroup = '' - -# Should new posts to the mailing list be sent to the newsgroup? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -gateway_to_news = 0 - -# Should new posts to the newsgroup be sent to the mailing list? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -gateway_to_mail = 0 - -# This setting determines the moderation policy of the newsgroup and its -# interaction with the moderation policy of the mailing list. This only -# applies to the newsgroup that you are gatewaying to, so if you are -# only gatewaying from Usenet, or the newsgroup you are gatewaying to is -# not moderated, set this option to None. -# -# If the newsgroup is moderated, you can set this mailing list up to be -# the moderation address for the newsgroup. By selecting Moderated, an -# additional posting hold will be placed in the approval process. All -# messages posted to the mailing list will have to be approved before -# being sent on to the newsgroup, or to the mailing list membership. -# -# Note that if the message has an Approved header with the list's -# administrative password in it, this hold test will be bypassed, -# allowing privileged posters to send messages directly to the list and -# the newsgroup. -# -# Finally, if the newsgroup is moderated, but you want to have an open -# posting policy anyway, you should select Open list, moderated group. -# The effect of this is to use the normal Mailman moderation facilities, -# but to add an Approved header to all messages that are gatewayed to -# Usenet. -# -# legal values are: -# 0 = "None" -# 1 = "Open list, moderated group" -# 2 = "Moderated" -news_moderation = 0 - -# Mailman prefixes Subject: headers with text you can customize and -# normally, this prefix shows up in messages gatewayed to Usenet. You -# can set this option to No to disable the prefix on gated messages. Of -# course, if you turn off normal Subject: prefixes, they won't be -# prefixed for gated messages either. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -news_prefix_subject_too = 1 - -## Autoreply options -# -# Auto-responder characteristics.<p> -# -# In the text fields below, string interpolation is performed with the -# following key/value substitutions: <p><ul> <li><b>listname</b> - -# <em>gets the name of the mailing list</em> <li><b>listurl</b> - -# <em>gets the list's listinfo URL</em> <li><b>requestemail</b> - -# <em>gets the list's -request address</em> <li><b>owneremail</b> - -# <em>gets the list's -owner address</em> </ul> -# -# <p>For each text field, you can either enter the text directly into -# the text box, or you can specify a file on your local system to upload -# as the text. - -# Should Mailman send an auto-response to mailing list posters? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -autorespond_postings = 0 - -# Auto-response text to send to mailing list posters. -autoresponse_postings_text = '' - -# Should Mailman send an auto-response to emails sent to the -owner -# address? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -autorespond_admin = 0 - -# Auto-response text to send to -owner emails. -autoresponse_admin_text = '' - -# Should Mailman send an auto-response to emails sent to the -request -# address? If you choose yes, decide whether you want Mailman to -# discard the original email, or forward it on to the system as a normal -# mail command. -# -# legal values are: -# 0 = "No" -# 1 = "Yes, w/discard" -# 2 = "Yes, w/forward" -autorespond_requests = 0 - -# Auto-response text to send to -request emails. -autoresponse_request_text = '' - -# Number of days between auto-responses to either the mailing list or -# -request/-owner address from the same poster. Set to zero (or -# negative) for no grace period (i.e. auto-respond to every message). -autoresponse_graceperiod = 90 - -## Contentfilter options -# -# Policies concerning the content of list traffic. -# -# <p>Content filtering works like this: when a message is received by -# the list and you have enabled content filtering, the individual -# attachments are first compared to the <a -# href="?VARHELP=contentfilter/filter_mime_types">filter types</a>. If -# the attachment type matches an entry in the filter types, it is -# discarded. -# -# <p>Then, if there are <a -# href="?VARHELP=contentfilter/pass_mime_types">pass types</a> defined, -# any attachment type that does <em>not</em> match a pass type is also -# discarded. If there are no pass types defined, this check is skipped. -# -# <p>After this initial filtering, any <tt>multipart</tt> attachments -# that are empty are removed. If the outer message is left empty after -# this filtering, then the whole message is discarded. -# -# <p> Then, each <tt>multipart/alternative</tt> section will be replaced -# by just the first alternative that is non-empty after filtering if <a -# href="?VARHELP=contentfilter/collapse_alternatives" -# >collapse_alternatives</a> is enabled. -# -# <p>Finally, any <tt>text/html</tt> parts that are left in the message -# may be converted to <tt>text/plain</tt> if <a -# href="?VARHELP=contentfilter/convert_html_to_plaintext" -# >convert_html_to_plaintext</a> is enabled and the site is configured -# to allow these conversions. - -# Should Mailman filter the content of list traffic according to the -# settings below? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -filter_content = 0 - -# Use this option to remove each message attachment that matches one of -# these content types. Each line should contain a string naming a MIME -# type/subtype, e.g. image/gif. Leave off the subtype to remove all -# parts with a matching major content type, e.g. image. -# -# Blank lines are ignored. -# -# See also <a href="?VARHELP=contentfilter/pass_mime_types" -# >pass_mime_types for a content type whitelist. -filter_mime_types = '' - -# Use this option to remove each message attachment that does not have a -# matching content type. Requirements and formats are exactly like <a -# href="?VARHELP=contentfilter/filter_mime_types" >filter_mime_types. -# -# Note: if you add entries to this list but don't add multipart to this -# list, any messages with attachments will be rejected by the pass -# filter. -pass_mime_types = """multipart/mixed -multipart/alternative -text/plain""" - -# Remove message attachments that have a matching filename extension. -filter_filename_extensions = """exe -bat -cmd -com -pif -scr -vbs -cpl""" - -# Remove message attachments that don't have a matching filename -# extension. Leave this field blank to skip this filter test. -pass_filename_extensions = '' - -# Should Mailman collapse multipart/alternative to its first part -# content? -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -collapse_alternatives = True - -# Should Mailman convert text/html parts to plain text? This conversion -# happens after MIME attachments have been stripped. -# -# legal values are: -# 0 = "No" -# 1 = "Yes" -convert_html_to_plaintext = 1 - -# One of these actions is taken when the message matches one of the -# content filtering rules, meaning, the top-level content type matches -# one of the <a href="?VARHELP=contentfilter/filter_mime_types" -# >filter_mime_types, or the top-level content type does not match one -# of the <a href="?VARHELP=contentfilter/pass_mime_types" -# >pass_mime_types, or if after filtering the subparts of the message, -# the message ends up empty. -# -# Note this action is not taken if after filtering the message still -# contains content. In that case the message is always forwarded on to -# the list membership. -# -# When messages are discarded, a log entry is written containing the -# Message-ID of the discarded message. When messages are rejected or -# forwarded to the list owner, a reason for the rejection is included in -# the bounce message to the original author. When messages are -# preserved, they are saved in a special queue directory on disk for the -# site administrator to view (and possibly rescue) but otherwise -# discarded. This last option is only available if enabled by the site -# administrator. -# -# legal values are: -# 0 = "Discard" -# 1 = "Reject" -# 2 = "Forward to List Owner" -# 3 = "Preserve" -filter_action = 0 - -## Topics options -# -# List topic keywords - -# The topic filter categorizes each incoming email message according to -# <a href="http://www.python.org/doc/current/lib/module-re.html">regular -# expression filters you specify below. If the message's Subject: or -# Keywords: header contains a match against a topic filter, the message -# is logically placed into a topic bucket. Each user can then choose to -# only receive messages from the mailing list for a particular topic -# bucket (or buckets). Any message not categorized in a topic bucket -# registered with the user is not delivered to the list. -# -# Note that this feature only works with regular delivery, not digest -# delivery. -# -# The body of the message can also be optionally scanned for Subject: -# and Keywords: headers, as specified by the <a -# href="?VARHELP=topics/topics_bodylines_limit">topics_bodylines_limit -# configuration variable. -# -# legal values are: -# 0 = "Disabled" -# 1 = "Enabled" -topics_enabled = 0 - -# The topic matcher will scan this many lines of the message body -# looking for topic keyword matches. Body scanning stops when either -# this many lines have been looked at, or a non-header-like body line is -# encountered. By setting this value to zero, no body lines will be -# scanned (i.e. only the Keywords: and Subject: headers will be -# scanned). By setting this value to a negative number, then all body -# lines will be scanned until a non-header-like line is encountered. -# -topics_bodylines_limit = 5 - -# Each topic keyword is actually a regular expression, which is matched -# against certain parts of a mail message, specifically the Keywords: -# and Subject: message headers. Note that the first few lines of the -# body of the message can also contain a Keywords: and Subject: "header" -# on which matching is also performed. -topics = [] - |