Add new list aoh@list.artofhosting.org.

2 files changed, 1308 insertions, 1 deletions

diff --git a/mailman/aoh.py b/mailman/aoh.py
new file mode 100644
index 0000000..3d2ebba
--- /dev/null
+++ b/mailman/aoh.py
@@ -0,0 +1,1307 @@
+# -*- python -*-
+# -*- coding: us-ascii -*-
+## "aoh" mailing list configuration settings
+## captured on Wed Dec  8 15:30:26 2010
+
+## General options
+#
+# Fundamental list characteristics, including descriptive info and basic
+# behaviors.
+
+# The capitalization of this name can be changed to make it presentable
+# in polite company as a proper noun, or to make an acronym part all
+# upper case, etc.  However, the name will be advertised as the email
+# address (e.g., in subscribe confirmation notices), so it should not be
+# otherwise altered.  (Email addresses are not case sensitive, but they
+# are sensitive to almost everything else :-)
+real_name = 'aoh'
+
+# There are two ownership roles associated with each mailing list.  The
+# list administrators are the people who have ultimate control over all
+# parameters of this mailing list.  They are able to change any list
+# configuration variable available through these administration web
+# pages.
+# 
+# The list moderators have more limited permissions; they are not able
+# to change any list configuration variable, but they are allowed to
+# tend to pending administration requests, including approving or
+# rejecting held subscription requests, and disposing of held postings.
+# Of course, the list administrators can also tend to pending requests.
+# 
+# In order to split the list ownership duties into administrators and
+# moderators, you must set a separate moderator password, and also
+# provide the email addresses of the list moderators.  Note that the
+# field you are changing here specifies the list administrators.
+owner = ['rowan@kaospilot.dk']
+
+# There are two ownership roles associated with each mailing list.  The
+# list administrators are the people who have ultimate control over all
+# parameters of this mailing list.  They are able to change any list
+# configuration variable available through these administration web
+# pages.
+# 
+# The list moderators have more limited permissions; they are not able
+# to change any list configuration variable, but they are allowed to
+# tend to pending administration requests, including approving or
+# rejecting held subscription requests, and disposing of held postings.
+# Of course, the list administrators can also tend to pending requests.
+# 
+# In order to split the list ownership duties into administrators and
+# moderators, you must set a separate moderator password, and also
+# provide the email addresses of the list moderators in this section.
+# Note that the field you are changing here specifies the list
+# moderators.
+moderator = []
+
+# This description is used when the mailing list is listed with other
+# mailing lists, or in headers, and so forth.  It should be as succinct
+# as you can get it, while still identifying what the list is.
+description = 'Art of Hosting (censored, semi-public)'
+
+# The text will be treated as html except that newlines will be
+# translated to <br> - so you can use links, preformatted text, etc, but
+# don't put in carriage returns except where you mean to separate
+# paragraphs.  And review your changes - bad html (like some
+# unterminated HTML constructs) can prevent display of the entire
+# listinfo page.
+info = """Open list for Art of Hosting.
+<ul><li>Anyone can send to the list (non-text parts are stripped).
+<li>Posts are censored for relevancy (except from list members).
+<li>Anyone can subscribe to the list (only members can see member list).
+</ul>Access limitation to the archive avoids search engine registrations, but does not ensure discretion as anyone can gain access by subscribing.
+
+Censorship avoids some noise, but also increase risk of rejection or delay of legitimate posts: Please subscribe to the list and use your subscribed address as sender if you want delivery of your posts ensured."""
+
+# This text will be prepended to subject lines of messages posted to the
+# list, to distinguish mailing list messages in mailbox summaries.
+# Brevity is premium here, it's ok to shorten long mailing list names to
+# something more concise, as long as it still identifies the mailing
+# list. You can also add a sequential number by %d substitution
+# directive. eg.; [listname %d] -> [listname 123] (listname %05d) ->
+# (listname 00123)
+# 
+subject_prefix = '[aoh] '
+
+# Hide the sender of a message, replacing it with the list address
+# (Removes From, Sender and Reply-To fields)
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+anonymous_list = False
+
+# Should any existing Reply-To: header found in the original message be
+# stripped?  If so, this will be done regardless of whether an explict
+# Reply-To: header is added by Mailman or not.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+first_strip_reply_to = False
+
+# This option controls what Mailman does to the Reply-To: header in
+# messages flowing through this mailing list.  When set to Poster, no
+# Reply-To: header is added by Mailman, although if one is present in
+# the original message, it is not stripped.  Setting this value to
+# either This list or Explicit address causes Mailman to insert a
+# specific Reply-To: header in all messages, overriding the header in
+# the original message if necessary (Explicit address inserts the value
+# of <a href="?VARHELP=general/reply_to_address">reply_to_address).
+# 
+# There are many reasons not to introduce or override the Reply-To:
+# header.  One is that some posters depend on their own Reply-To:
+# settings to convey their valid return address.  Another is that
+# modifying Reply-To: makes it much more difficult to send private
+# replies.  See <a
+# href="http://www.unicom.com/pw/reply-to-harmful.html">`Reply-To'
+# Munging Considered Harmful for a general discussion of this issue.
+# See <a
+# href="http://www.metasystema.net/essays/reply-to.mhtml">Reply-To
+# Munging Considered Useful for a dissenting opinion.
+# 
+# Some mailing lists have restricted posting privileges, with a parallel
+# list devoted to discussions.  Examples are `patches' or `checkin'
+# lists, where software changes are posted by a revision control system,
+# but discussion about the changes occurs on a developers mailing list.
+# To support these types of mailing lists, select Explicit address and
+# set the Reply-To: address below to point to the parallel list.
+#
+# legal values are:
+#    0 = "Poster"
+#    1 = "This list"
+#    2 = "Explicit address"
+reply_goes_to_list = 0
+
+# This is the address set in the Reply-To: header when the <a
+# href="?VARHELP=general/reply_goes_to_list">reply_goes_to_list option
+# is set to Explicit address.
+# 
+# There are many reasons not to introduce or override the Reply-To:
+# header.  One is that some posters depend on their own Reply-To:
+# settings to convey their valid return address.  Another is that
+# modifying Reply-To: makes it much more difficult to send private
+# replies.  See <a
+# href="http://www.unicom.com/pw/reply-to-harmful.html">`Reply-To'
+# Munging Considered Harmful for a general discussion of this issue.
+# See <a
+# href="http://www.metasystema.net/essays/reply-to.mhtml">Reply-To
+# Munging Considered Useful for a dissenting opinion.
+# 
+# Some mailing lists have restricted posting privileges, with a parallel
+# list devoted to discussions.  Examples are `patches' or `checkin'
+# lists, where software changes are posted by a revision control system,
+# but discussion about the changes occurs on a developers mailing list.
+# To support these types of mailing lists, specify the explicit
+# Reply-To: address here.  You must also specify Explicit address in the
+# reply_goes_to_list variable.
+# 
+# Note that if the original message contains a Reply-To: header, it will
+# not be changed.
+reply_to_address = ''
+
+# Set this to yes when this list is intended to cascade only to other
+# mailing lists.  When set, meta notices like confirmations and password
+# reminders will be directed to an address derived from the member's
+# address - it will have the value of "umbrella_member_suffix" appended
+# to the member's account name.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+umbrella_list = False
+
+# When "umbrella_list" is set to indicate that this list has other
+# mailing lists as members, then administrative notices like
+# confirmations and password reminders need to not be sent to the member
+# list addresses, but rather to the owner of those member lists.  In
+# that case, the value of this setting is appended to the member's
+# account name for such notices.  `-owner' is the typical choice.  This
+# setting has no effect when "umbrella_list" is "No".
+umbrella_member_suffix = '-owner'
+
+# Turn this on if you want password reminders to be sent once per month
+# to your members.  Note that members may disable their own individual
+# password reminders.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+send_reminders = 0
+
+# This value, if any, will be added to the front of the new-subscriber
+# welcome message.  The rest of the welcome message already describes
+# the important addresses and URLs for the mailing list, so you don't
+# need to include any of that kind of stuff here.  This should just
+# contain mission-specific kinds of things, like etiquette policies or
+# team orientation, or that kind of thing.
+# 
+# Note that this text will be wrapped, according to the following rules:
+# Each paragraph is filled so that no line is longer than 70 characters.
+# Any line that begins with whitespace is not filled. A blank line
+# separates paragraphs.
+# 
+welcome_msg = """This is an open list for Art of Hosting.
+
+ * Anyone can send to the list (non-text parts are stripped).
+ * Posts are censored for relevancy (except from list members).
+ * Anyone can subscribe to the list (only members can see member list).
+
+Access limitation to the archive avoids search engine registrations, 
+but does not ensure discretion as anyone can gain access by subscribing.
+
+Censorship avoids some noise, but also increase risk of rejection or 
+delay of legitimate posts: Please subscribe to the list and use your 
+subscribed address as sender if you want delivery of your posts ensured.
+
+All emails are archived (only members can read the archive)."""
+
+# Turn this off only if you plan on subscribing people manually and
+# don't want them to know that you did so.  This option is most useful
+# for transparently migrating lists from some other mailing list manager
+# to Mailman.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+send_welcome_msg = True
+
+# Text sent to people leaving the list.  If empty, no special text will
+# be added to the unsubscribe message.
+goodbye_msg = ''
+
+# Send goodbye message to members when they are unsubscribed?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+send_goodbye_msg = True
+
+# List moderators (and list administrators) are sent daily reminders of
+# requests pending approval, like subscriptions to a moderated list, or
+# postings that are being held for one reason or another.  Setting this
+# option causes notices to be sent immediately on the arrival of new
+# requests as well.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+admin_immed_notify = True
+
+# Should administrator get notices of subscribes and unsubscribes?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+admin_notify_mchanges = 1
+
+# Send mail to poster when their posting is held for approval?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+respond_to_post_requests = 1
+
+# When this option is enabled, all list traffic is emergency moderated,
+# i.e. held for moderation.  Turn this option on when your list is
+# experiencing a flamewar and you want a cooling off period.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+emergency = 0
+
+# When a new member is subscribed to this list, their initial set of
+# options is taken from the this variable's setting.
+new_member_options = 256
+
+# Administrivia tests will check postings to see whether it's really
+# meant as an administrative request (like subscribe, unsubscribe, etc),
+# and will add it to the the administrative requests queue, notifying
+# the administrator of the new request, in the process.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+administrivia = 0
+
+# Maximum length in kilobytes (KB) of a message body.  Use 0 for no
+# limit.
+max_message_size = 0
+
+# Maximum number of members to show on one page of the Membership List.
+admin_member_chunksize = 30
+
+# The "host_name" is the preferred name for email to mailman-related
+# addresses on this host, and generally should be the mail host's
+# exchanger address, if any.  This setting can be useful for selecting
+# among alternative names of a host that has multiple addresses.
+host_name = 'list.artofhosting.org'
+
+# RFC 2369 defines a set of List-* headers that are normally added to
+# every message sent to the list membership. These greatly aid end-users
+# who are using standards compliant mail readers.  They should normally
+# always be enabled.
+# 
+# However, not all mail readers are standards compliant yet, and if you
+# have a large number of members who are using non-compliant mail
+# readers, they may be annoyed at these headers.  You should first try
+# to educate your members as to why these headers exist, and how to hide
+# them in their mail clients.  As a last resort you can disable these
+# headers, but this is not recommended (and in fact, your ability to
+# disable these headers may eventually go away).
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+include_rfc2369_headers = 1
+
+# The List-Post: header is one of the headers recommended by RFC 2369.
+# However for some announce-only mailing lists, only a very select group
+# of people are allowed to post to the list; the general membership is
+# usually not allowed to post.  For lists of this nature, the List-Post:
+# header is misleading. Select No to disable the inclusion of this
+# header. (This does not affect the inclusion of the other List-*:
+# headers.)
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+include_list_post_header = 1
+
+# Discard held messages older than this number of days. Use 0 for no
+# automatic discarding.
+max_days_to_hold = 7
+
+## Language options
+#
+# Natural language (internationalization) options.
+
+# This is the default natural language for this mailing list. If more
+# than one language is supported then users will be able to select their
+# own preferences for when they interact with the list.  All other
+# interactions will be conducted in the default language.  This applies
+# to both web-based and email-based messages, but not to email posted by
+# list members.
+preferred_language = 'en'
+
+# These are all the natural languages supported by this list. Note that
+# the default language must be included.
+available_languages = ['da', 'de', 'en', 'es', 'fi', 'nl', 'no', 'pt_BR', 'sv']
+
+# If your mailing list's default language uses a non-ASCII character set
+# and the prefix contains non-ASCII characters, the prefix will always
+# be encoded according to the relevant standards.  However, if your
+# prefix contains only ASCII characters, you may want to set this option
+# to Never to disable prefix encoding.  This can make the subject
+# headers slightly more readable for users with mail readers that don't
+# properly handle non-ASCII encodings.
+# 
+# Note however, that if your mailing list receives both encoded and
+# unencoded subject headers, you might want to choose As needed.  Using
+# this setting, Mailman will not encode ASCII prefixes when the rest of
+# the header contains only ASCII characters, but if the original header
+# contains non-ASCII characters, it will encode the prefix.  This avoids
+# an ambiguity in the standards which could cause some mail readers to
+# display extra, or missing spaces between the prefix and the original
+# header.
+#
+# legal values are:
+#    0 = "Never"
+#    1 = "Always"
+#    2 = "As needed"
+encode_ascii_prefixes = 2
+
+## Nondigest options
+#
+# Policies concerning immediately delivered list traffic.
+
+# Can subscribers choose to receive mail immediately, rather than in
+# batched digests?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+nondigestable = True
+
+# Text prepended to the top of every immediately-delivery message. This
+# text can include Python format strings which are resolved against list
+# attributes.  The list of substitutions allowed are:
+# 
+# 
+# real_name - The "pretty" name of the list; usually the list name with
+# capitalization.
+# 
+# list_name - The name by which the list is identified in URLs, where
+# case is significant.
+# 
+# host_name - The fully qualified domain name that the list server runs
+# on.
+# 
+# web_page_url - The base URL for Mailman.  This can be appended with,
+# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing
+# list.
+# 
+# description - The brief description of the mailing list.
+# 
+# info - The full description of the mailing list.
+# 
+# cgiext - The extension added to CGI scripts.
+# 
+# 
+msg_header = ''
+
+# Text appended to the bottom of every immediately-delivery message.
+# This text can include Python format strings which are resolved against
+# list attributes.  The list of substitutions allowed are:
+# 
+# 
+# real_name - The "pretty" name of the list; usually the list name with
+# capitalization.
+# 
+# list_name - The name by which the list is identified in URLs, where
+# case is significant.
+# 
+# host_name - The fully qualified domain name that the list server runs
+# on.
+# 
+# web_page_url - The base URL for Mailman.  This can be appended with,
+# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing
+# list.
+# 
+# description - The brief description of the mailing list.
+# 
+# info - The full description of the mailing list.
+# 
+# cgiext - The extension added to CGI scripts.
+# 
+# 
+msg_footer = """-- 
+%(real_name)s mailing list
+%(real_name)s@%(host_name)s
+%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s"""
+
+# When you scrub attachments, they are stored in archive area and links
+# are made in the message so that the member can access via web browser.
+# If you want the attachments totally disappear, you can use content
+# filter options.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+scrub_nondigest = 1
+
+# The list addresses should be written in full mail address format (e.g.
+# mailman@example.com). Do not specify this list address mutually in the
+# exclude list configuration page of the other list, or members of both
+# lists won't get any message. Note also that the site administrator may
+# prohibit cross domain siblings.
+regular_exclude_lists = []
+
+# The list addresses should be written in full mail address format (e.g.
+# mailman@example.com). Note also that the site administrator may
+# prohibit cross domain siblings.
+regular_include_lists = []
+
+## Digest options
+#
+# Batched-delivery digest characteristics.
+
+# Can list members choose to receive list traffic bunched in digests?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+digestable = True
+
+# Which delivery mode is the default for new users?
+#
+# legal values are:
+#    0 = "Regular"
+#    1 = "Digest"
+digest_is_default = False
+
+# When receiving digests, which format is default?
+#
+# legal values are:
+#    0 = "Plain"
+#    1 = "MIME"
+mime_is_default_digest = 1
+
+# How big in Kb should a digest be before it gets sent out?
+digest_size_threshhold = 30
+
+# Should a digest be dispatched daily when the size threshold isn't
+# reached?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+digest_send_periodic = True
+
+# Text attached (as an initial message, before the table of contents) to
+# the top of digests. This text can include Python format strings which
+# are resolved against list attributes.  The list of substitutions
+# allowed are:
+# 
+# 
+# real_name - The "pretty" name of the list; usually the list name with
+# capitalization.
+# 
+# list_name - The name by which the list is identified in URLs, where
+# case is significant.
+# 
+# host_name - The fully qualified domain name that the list server runs
+# on.
+# 
+# web_page_url - The base URL for Mailman.  This can be appended with,
+# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing
+# list.
+# 
+# description - The brief description of the mailing list.
+# 
+# info - The full description of the mailing list.
+# 
+# cgiext - The extension added to CGI scripts.
+# 
+# 
+digest_header = ''
+
+# Text attached (as a final message) to the bottom of digests. This text
+# can include Python format strings which are resolved against list
+# attributes.  The list of substitutions allowed are:
+# 
+# 
+# real_name - The "pretty" name of the list; usually the list name with
+# capitalization.
+# 
+# list_name - The name by which the list is identified in URLs, where
+# case is significant.
+# 
+# host_name - The fully qualified domain name that the list server runs
+# on.
+# 
+# web_page_url - The base URL for Mailman.  This can be appended with,
+# e.g. listinfo/%(list_name)s to yield the listinfo page for the mailing
+# list.
+# 
+# description - The brief description of the mailing list.
+# 
+# info - The full description of the mailing list.
+# 
+# cgiext - The extension added to CGI scripts.
+# 
+# 
+digest_footer = """-- 
+%(real_name)s mailing list
+%(real_name)s@%(host_name)s
+%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s"""
+
+# When a new digest volume is started, the volume number is incremented
+# and the issue number is reset to 1.
+#
+# legal values are:
+#    0 = "Yearly"
+#    1 = "Monthly"
+#    2 = "Quarterly"
+#    3 = "Weekly"
+#    4 = "Daily"
+digest_volume_frequency = 1
+
+## Privacy options
+#
+# This section allows you to configure subscription and membership
+# exposure policy.  You can also control whether this list is public or
+# not.  See also the <a
+# href="http://list.artofhosting.org/admin/aoh/archive">Archival
+# Options</a> section for separate archive-related privacy settings.
+
+# Advertise this list when people ask what lists are on this machine?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+advertised = 1
+
+# Confirm (*) - email confirmation required Require approval - require
+# list administrator approval for subscriptions Confirm and approve -
+# both confirm and approve
+# 
+# (*) when someone requests a subscription, Mailman sends them a notice
+# with a unique subscription request number that they must reply to in
+# order to subscribe. This prevents mischievous (or malicious) people
+# from creating subscriptions for others without their consent.
+#
+# legal values are:
+#    1 = "Confirm"
+#    2 = "Require approval"
+#    3 = "Confirm and approve"
+subscribe_policy = 1
+
+# When members want to leave a list, they will make an unsubscription
+# request, either via the web or via email. Normally it is best for you
+# to allow open unsubscriptions so that users can easily remove
+# themselves from mailing lists (they get really upset if they can't get
+# off lists!).
+# 
+# For some lists though, you may want to impose moderator approval
+# before an unsubscription request is processed.  Examples of such lists
+# include a corporate mailing list that all employees are required to be
+# members of.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+unsubscribe_policy = 0
+
+# Addresses in this list are banned outright from subscribing to this
+# mailing list, with no further moderation required.  Add addresses one
+# per line; start the line with a ^ character to designate a regular
+# expression match.
+ban_list = []
+
+# When set, the list of subscribers is protected by member or admin
+# password authentication.
+#
+# legal values are:
+#    0 = "Anyone"
+#    1 = "List members"
+#    2 = "List admin only"
+private_roster = 1
+
+# Setting this option causes member email addresses to be transformed
+# when they are presented on list web pages (both in text and as links),
+# so they're not trivially recognizable as email addresses.  The
+# intention is to prevent the addresses from being snarfed up by
+# automated web scanners for use by spammers.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+obscure_addresses = 0
+
+## Privacy options
+#
+# When a message is posted to the list, a series of moderation steps are
+# taken to decide whether a moderator must first approve the message or
+# not.  This section contains the controls for moderation of both member
+# and non-member postings.
+# 
+# <p>Member postings are held for moderation if their <b>moderation
+# flag</b> is turned on.  You can control whether member postings are
+# moderated by default or not.
+# 
+# <p>Non-member postings can be automatically <a
+# href="?VARHELP=privacy/sender/accept_these_nonmembers" >accepted</a>,
+# <a href="?VARHELP=privacy/sender/hold_these_nonmembers">held for
+# moderation</a>, <a
+# href="?VARHELP=privacy/sender/reject_these_nonmembers" >rejected</a>
+# (bounced), or <a
+# href="?VARHELP=privacy/sender/discard_these_nonmembers"
+# >discarded</a>, either individually or as a group.  Any posting from a
+# non-member who is not explicitly accepted, rejected, or discarded,
+# will have their posting filtered by the <a
+# href="?VARHELP=privacy/sender/generic_nonmember_action">general
+# non-member rules</a>.
+# 
+# <p>In the text boxes below, add one address per line; start the line
+# with a ^ character to designate a <a href=
+# "http://docs.python.org/library/re.html" >Python regular
+# expression</a>.  When entering backslashes, do so as if you were using
+# Python raw strings (i.e. you generally just use a single backslash).
+# 
+# <p>Note that non-regexp matches are always done first.
+
+# Each list member has a moderation flag which says whether messages
+# from the list member can be posted directly to the list, or must first
+# be approved by the list moderator.  When the moderation flag is turned
+# on, list member postings must be approved first.  You, the list
+# administrator can decide whether a specific individual's postings will
+# be moderated or not.
+# 
+# When a new member is subscribed, their initial moderation flag takes
+# its value from this option.  Turn this option off to accept member
+# postings by default.  Turn this option on to, by default, moderate
+# member postings first.  You can always manually set an individual
+# member's moderation bit by using the membership management screens.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+default_member_moderation = 0
+
+# Hold -- this holds the message for approval by the list moderators.
+# 
+# Reject -- this automatically rejects the message by sending a bounce
+# notice to the post's author.  The text of the bounce notice can be <a
+# href="?VARHELP=privacy/sender/member_moderation_notice" >configured by
+# you.
+# 
+# Discard -- this simply discards the message, with no notice sent to
+# the post's author.
+# 
+#
+# legal values are:
+#    0 = "Hold"
+#    1 = "Reject"
+#    2 = "Discard"
+member_moderation_action = 0
+
+# Text to include in any <a
+# href="?VARHELP/privacy/sender/member_moderation_action" >rejection
+# notice to be sent to moderated members who post to this list.
+member_moderation_notice = ''
+
+# Postings from any of these non-members will be automatically accepted
+# with no further moderation applied.  Add member addresses one per
+# line; start the line with a ^ character to designate a regular
+# expression match.  A line consisting of the @ character followed by a
+# list name specifies another Mailman list in this installation, all of
+# whose member addresses will be accepted for this list.
+accept_these_nonmembers = ['']
+
+# Postings from any of these non-members will be immediately and
+# automatically held for moderation by the list moderators. The sender
+# will receive a notification message which will allow them to cancel
+# their held message.  Add member addresses one per line; start the line
+# with a ^ character to designate a regular expression match.
+hold_these_nonmembers = []
+
+# Postings from any of these non-members will be automatically rejected.
+# In other words, their messages will be bounced back to the sender with
+# a notification of automatic rejection.  This option is not appropriate
+# for known spam senders; their messages should be <a
+# href="?VARHELP=privacy/sender/discard_these_nonmembers" >automatically
+# discarded.
+# 
+# Add member addresses one per line; start the line with a ^ character
+# to designate a regular expression match.
+reject_these_nonmembers = []
+
+# Postings from any of these non-members will be automatically
+# discarded.  That is, the message will be thrown away with no further
+# processing or notification.  The sender will not receive a
+# notification or a bounce, however the list moderators can optionally
+# <a href="?VARHELP=privacy/sender/forward_auto_discards" >receive
+# copies of auto-discarded messages..
+# 
+# Add member addresses one per line; start the line with a ^ character
+# to designate a regular expression match.
+discard_these_nonmembers = []
+
+# When a post from a non-member is received, the message's sender is
+# matched against the list of explicitly <a
+# href="?VARHELP=privacy/sender/accept_these_nonmembers" >accepted,
+# held, <a href="?VARHELP=privacy/sender/reject_these_nonmembers"
+# >rejected (bounced), and <a
+# href="?VARHELP=privacy/sender/discard_these_nonmembers" >discarded
+# addresses.  If no match is found, then this action is taken.
+#
+# legal values are:
+#    0 = "Accept"
+#    1 = "Hold"
+#    2 = "Reject"
+#    3 = "Discard"
+generic_nonmember_action = 1
+
+# Should messages from non-members, which are automatically discarded,
+# be forwarded to the list moderator?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+forward_auto_discards = True
+
+# Text to include in any rejection notice to be sent to non-members who
+# post to this list. This notice can include the list's owner address by
+# %(listowner)s and replaces the internally crafted default message.
+nonmember_rejection_notice = ''
+
+## Privacy options
+#
+# This section allows you to configure various filters based on the
+# recipient of the message.
+
+# Many (in fact, most) spams do not explicitly name their myriad
+# destinations in the explicit destination addresses - in fact often the
+# To: field has a totally bogus address for obfuscation.  The constraint
+# applies only to the stuff in the address before the '@' sign, but
+# still catches all such spams.
+# 
+# The cost is that the list will not accept unhindered any postings
+# relayed from other addresses, unless
+# 
+# 
+# The relaying address has the same name, or
+# 
+# The relaying address name is included on the options that specifies
+# acceptable aliases for the list.
+# 
+# 
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+require_explicit_destination = 1
+
+# Alternate addresses that are acceptable when
+# `require_explicit_destination' is enabled.  This option takes a list
+# of regular expressions, one per line, which is matched against every
+# recipient address in the message.  The matching is performed with
+# Python's re.match() function, meaning they are anchored to the start
+# of the string.
+# 
+# For backwards compatibility with Mailman 1.1, if the regexp does not
+# contain an `@', then the pattern is matched against just the local
+# part of the recipient address.  If that match fails, or if the pattern
+# does contain an `@', then the pattern is matched against the entire
+# recipient address.
+# 
+# Matching against the local part is deprecated; in a future release,
+# the pattern will always be matched against the entire recipient
+# address.
+acceptable_aliases = ''
+
+# If a posting has this number, or more, of recipients, it is held for
+# admin approval.  Use 0 for no ceiling.
+max_num_recipients = 0
+
+## Privacy options
+#
+# This section allows you to configure various anti-spam filters posting
+# filters, which can help reduce the amount of spam your list members
+# end up receiving.
+# 
+
+# Each header filter rule has two parts, a list of regular expressions,
+# one per line, and an action to take.  Mailman matches the message's
+# headers against every regular expression in the rule and if any match,
+# the message is rejected, held, or discarded based on the action you
+# specify.  Use Defer to temporarily disable a rule.
+# 
+# You can have more than one filter rule for your list.  In that case,
+# each rule is matched in turn, with processing stopped after the first
+# match.
+# 
+# Note that headers are collected from all the attachments (except for
+# the mailman administrivia message) and matched against the regular
+# expressions. With this feature, you can effectively sort out messages
+# with dangerous file types or file name extensions.
+header_filter_rules = [('X-Spam-Status: Yes', 3, False)]
+
+# Use this option to prohibit posts according to specific header values.
+# The target value is a regular-expression for matching against the
+# specified header.  The match is done disregarding letter case.  Lines
+# beginning with '#' are ignored as comments.
+# 
+# For example:to: .*@public.com  says to hold all postings with a To:
+# mail header containing '@public.com' anywhere among the addresses.
+# 
+# Note that leading whitespace is trimmed from the regexp.  This can be
+# circumvented in a number of ways, e.g. by escaping or bracketing it.
+bounce_matching_headers = """# Lines that *start* with a '#' are comments.
+to: friend@public.com
+message-id: relay.comanche.denmark.eu
+from: list@listme.com
+from: .*@uplinkpro.com"""
+
+## Bounce options
+#
+# These policies control the automatic bounce processing system in
+# Mailman.  Here's an overview of how it works.
+# 
+# <p>When a bounce is received, Mailman tries to extract two pieces of
+# information from the message: the address of the member the message
+# was intended for, and the severity of the problem causing the bounce.
+# The severity can be either <em>hard</em> or <em>soft</em> meaning
+# either a fatal error occurred, or a transient error occurred.  When in
+# doubt, a hard severity is used.
+# 
+# <p>If no member address can be extracted from the bounce, then the
+# bounce is usually discarded.  Otherwise, each member is assigned a
+# <em>bounce score</em> and every time we encounter a bounce from this
+# member we increment the score.  Hard bounces increment by 1 while soft
+# bounces increment by 0.5.  We only increment the bounce score once per
+# day, so even if we receive ten hard bounces from a member per day,
+# their score will increase by only 1 for that day.
+# 
+# <p>When a member's bounce score is greater than the <a
+# href="?VARHELP=bounce/bounce_score_threshold">bounce score
+# threshold</a>, the subscription is disabled.  Once disabled, the
+# member will not receive any postings from the list until their
+# membership is explicitly re-enabled (either by the list administrator
+# or the user).  However, they will receive occasional reminders that
+# their membership has been disabled, and these reminders will include
+# information about how to re-enable their membership.
+# 
+# <p>You can control both the <a
+# href="?VARHELP=bounce/bounce_you_are_disabled_warnings">number of
+# reminders</a> the member will receive and the <a
+# href="?VARHELP=bounce/bounce_you_are_disabled_warnings_interval"
+# >frequency</a> with which these reminders are sent.
+# 
+# <p>There is one other important configuration variable; after a
+# certain period of time -- during which no bounces from the member are
+# received -- the bounce information is <a
+# href="?VARHELP=bounce/bounce_info_stale_after">considered stale</a>
+# and discarded.  Thus by adjusting this value, and the score threshold,
+# you can control how quickly bouncing members are disabled.  You should
+# tune both of these to the frequency and traffic volume of your list.
+
+# By setting this value to No, you disable all automatic bounce
+# processing for this list, however bounce messages will still be
+# discarded so that the list administrator isn't inundated with them.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+bounce_processing = True
+
+# Each subscriber is assigned a bounce score, as a floating point
+# number.  Whenever Mailman receives a bounce from a list member, that
+# member's score is incremented.  Hard bounces (fatal errors) increase
+# the score by 1, while soft bounces (temporary errors) increase the
+# score by 0.5.  Only one bounce per day counts against a member's
+# score, so even if 10 bounces are received for a member on the same
+# day, their score will increase by just 1.
+# 
+# This variable describes the upper limit for a member's bounce score,
+# above which they are automatically disabled, but not removed from the
+# mailing list.
+bounce_score_threshold = 5.0
+
+# The number of days after which a member's bounce information is
+# discarded, if no new bounces have been received in the interim.  This
+# value must be an integer.
+bounce_info_stale_after = 7
+
+# How many Your Membership Is Disabled warnings a disabled member should
+# get before their address is removed from the mailing list.  Set to 0
+# to immediately remove an address from the list once their bounce score
+# exceeds the threshold.  This value must be an integer.
+bounce_you_are_disabled_warnings = 3
+
+# The number of days between sending the Your Membership Is Disabled
+# warnings.  This value must be an integer.
+bounce_you_are_disabled_warnings_interval = 7
+
+# While Mailman's bounce detector is fairly robust, it's impossible to
+# detect every bounce format in the world.  You should keep this
+# variable set to Yes for two reasons: 1) If this really is a permanent
+# bounce from one of your members, you should probably manually remove
+# them from your list, and 2) you might want to send the message on to
+# the Mailman developers so that this new format can be added to its
+# known set.
+# 
+# If you really can't be bothered, then set this variable to No and all
+# non-detected bounces will be discarded without further processing.
+# 
+# Note: This setting will also affect all messages sent to your list's
+# -admin address.  This address is deprecated and should never be used,
+# but some people may still send mail to this address.  If this happens,
+# and this variable is set to No those messages too will get discarded.
+# You may want to set up an autoresponse message for email to the -owner
+# and -admin address.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+bounce_unrecognized_goes_to_list_owner = True
+
+# By setting this value to No, you turn off notification messages that
+# are normally sent to the list owners when a member's delivery is
+# disabled due to excessive bounces. An attempt to notify the member
+# will always be made.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+bounce_notify_owner_on_disable = True
+
+# By setting this value to No, you turn off notification messages that
+# are normally sent to the list owners when a member is unsubscribed due
+# to excessive bounces.  An attempt to notify the member will always be
+# made.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+bounce_notify_owner_on_removal = True
+
+## Archive options
+#
+# List traffic archival policies.
+
+# Archive messages?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+archive = True
+
+# Is archive file source for public or private archival?
+#
+# legal values are:
+#    0 = "public"
+#    1 = "private"
+archive_private = 1
+
+# How often should a new archive volume be started?
+#
+# legal values are:
+#    0 = "Yearly"
+#    1 = "Monthly"
+#    2 = "Quarterly"
+#    3 = "Weekly"
+#    4 = "Daily"
+archive_volume_frequency = 1
+
+## Gateway options
+#
+# Mail-to-News and News-to-Mail gateway services.
+
+# This value may be either the name of your news server, or optionally
+# of the format name:port, where port is a port number.
+# 
+# The news server is not part of Mailman proper.  You have to already
+# have access to an NNTP server, and that NNTP server must recognize the
+# machine this mailing list runs on as a machine capable of reading and
+# posting news.
+nntp_host = ''
+
+# The name of the Usenet group to gateway to and/or from.
+linked_newsgroup = ''
+
+# Should new posts to the mailing list be sent to the newsgroup?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+gateway_to_news = 0
+
+# Should new posts to the newsgroup be sent to the mailing list?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+gateway_to_mail = 0
+
+# This setting determines the moderation policy of the newsgroup and its
+# interaction with the moderation policy of the mailing list.  This only
+# applies to the newsgroup that you are gatewaying to, so if you are
+# only gatewaying from Usenet, or the newsgroup you are gatewaying to is
+# not moderated, set this option to None.
+# 
+# If the newsgroup is moderated, you can set this mailing list up to be
+# the moderation address for the newsgroup.  By selecting Moderated, an
+# additional posting hold will be placed in the approval process.  All
+# messages posted to the mailing list will have to be approved before
+# being sent on to the newsgroup, or to the mailing list membership.
+# 
+# Note that if the message has an Approved header with the list's
+# administrative password in it, this hold test will be bypassed,
+# allowing privileged posters to send messages directly to the list and
+# the newsgroup.
+# 
+# Finally, if the newsgroup is moderated, but you want to have an open
+# posting policy anyway, you should select Open list, moderated group.
+# The effect of this is to use the normal Mailman moderation facilities,
+# but to add an Approved header to all messages that are gatewayed to
+# Usenet.
+#
+# legal values are:
+#    0 = "None"
+#    1 = "Open list, moderated group"
+#    2 = "Moderated"
+news_moderation = 0
+
+# Mailman prefixes Subject: headers with text you can customize and
+# normally, this prefix shows up in messages gatewayed to Usenet.  You
+# can set this option to No to disable the prefix on gated messages.  Of
+# course, if you turn off normal Subject: prefixes, they won't be
+# prefixed for gated messages either.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+news_prefix_subject_too = 1
+
+## Autoreply options
+#
+# Auto-responder characteristics.<p>
+# 
+# In the text fields below, string interpolation is performed with the
+# following key/value substitutions: <p><ul> <li><b>listname</b> -
+# <em>gets the name of the mailing list</em> <li><b>listurl</b> -
+# <em>gets the list's listinfo URL</em> <li><b>requestemail</b> -
+# <em>gets the list's -request address</em> <li><b>owneremail</b> -
+# <em>gets the list's -owner address</em> </ul>
+# 
+# <p>For each text field, you can either enter the text directly into
+# the text box, or you can specify a file on your local system to upload
+# as the text.
+
+# Should Mailman send an auto-response to mailing list posters?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+autorespond_postings = 0
+
+# Auto-response text to send to mailing list posters.
+autoresponse_postings_text = ''
+
+# Should Mailman send an auto-response to emails sent to the -owner
+# address?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+autorespond_admin = 0
+
+# Auto-response text to send to -owner emails.
+autoresponse_admin_text = ''
+
+# Should Mailman send an auto-response to emails sent to the -request
+# address?  If you choose yes, decide whether you want Mailman to
+# discard the original email, or forward it on to the system as a normal
+# mail command.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes, w/discard"
+#    2 = "Yes, w/forward"
+autorespond_requests = 0
+
+# Auto-response text to send to -request emails.
+autoresponse_request_text = ''
+
+# Number of days between auto-responses to either the mailing list or
+# -request/-owner address from the same poster.  Set to zero (or
+# negative) for no grace period (i.e. auto-respond to every message).
+autoresponse_graceperiod = 90
+
+## Contentfilter options
+#
+# Policies concerning the content of list traffic.
+# 
+# <p>Content filtering works like this: when a message is received by
+# the list and you have enabled content filtering, the individual
+# attachments are first compared to the <a
+# href="?VARHELP=contentfilter/filter_mime_types">filter types</a>.  If
+# the attachment type matches an entry in the filter types, it is
+# discarded.
+# 
+# <p>Then, if there are <a
+# href="?VARHELP=contentfilter/pass_mime_types">pass types</a> defined,
+# any attachment type that does <em>not</em> match a pass type is also
+# discarded.  If there are no pass types defined, this check is skipped.
+# 
+# <p>After this initial filtering, any <tt>multipart</tt> attachments
+# that are empty are removed.  If the outer message is left empty after
+# this filtering, then the whole message is discarded.
+# 
+# <p> Then, each <tt>multipart/alternative</tt> section will be replaced
+# by just the first alternative that is non-empty after filtering if <a
+# href="?VARHELP=contentfilter/collapse_alternatives"
+# >collapse_alternatives</a> is enabled.
+# 
+# <p>Finally, any <tt>text/html</tt> parts that are left in the message
+# may be converted to <tt>text/plain</tt> if <a
+# href="?VARHELP=contentfilter/convert_html_to_plaintext"
+# >convert_html_to_plaintext</a> is enabled and the site is configured
+# to allow these conversions.
+
+# Should Mailman filter the content of list traffic according to the
+# settings below?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+filter_content = False
+
+# Use this option to remove each message attachment that matches one of
+# these content types.  Each line should contain a string naming a MIME
+# type/subtype, e.g. image/gif.  Leave off the subtype to remove all
+# parts with a matching major content type, e.g. image.
+# 
+# Blank lines are ignored.
+# 
+# See also <a href="?VARHELP=contentfilter/pass_mime_types"
+# >pass_mime_types for a content type whitelist.
+filter_mime_types = ''
+
+# Use this option to remove each message attachment that does not have a
+# matching content type.  Requirements and formats are exactly like <a
+# href="?VARHELP=contentfilter/filter_mime_types" >filter_mime_types.
+# 
+# Note: if you add entries to this list but don't add multipart to this
+# list, any messages with attachments will be rejected by the pass
+# filter.
+pass_mime_types = """multipart/signed
+multipart/mixed
+multipart/alternative
+application/pgp-signature
+application/pkcs7-signature
+text/plain"""
+
+# Remove message attachments that have a matching filename extension.
+filter_filename_extensions = """exe
+bat
+cmd
+com
+pif
+scr
+vbs
+cpl"""
+
+# Remove message attachments that don't have a matching filename
+# extension.  Leave this field blank to skip this filter test.
+pass_filename_extensions = ''
+
+# Should Mailman collapse multipart/alternative to its first part
+# content?
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+collapse_alternatives = True
+
+# Should Mailman convert text/html parts to plain text?  This conversion
+# happens after MIME attachments have been stripped.
+#
+# legal values are:
+#    0 = "No"
+#    1 = "Yes"
+convert_html_to_plaintext = True
+
+# One of these actions is taken when the message matches one of the
+# content filtering rules, meaning, the top-level content type matches
+# one of the <a href="?VARHELP=contentfilter/filter_mime_types"
+# >filter_mime_types, or the top-level content type does not match one
+# of the <a href="?VARHELP=contentfilter/pass_mime_types"
+# >pass_mime_types, or if after filtering the subparts of the message,
+# the message ends up empty.
+# 
+# Note this action is not taken if after filtering the message still
+# contains content.  In that case the message is always forwarded on to
+# the list membership.
+# 
+# When messages are discarded, a log entry is written containing the
+# Message-ID of the discarded message.  When messages are rejected or
+# forwarded to the list owner, a reason for the rejection is included in
+# the bounce message to the original author.  When messages are
+# preserved, they are saved in a special queue directory on disk for the
+# site administrator to view (and possibly rescue) but otherwise
+# discarded.  This last option is only available if enabled by the site
+# administrator.
+#
+# legal values are:
+#    0 = "Discard"
+#    1 = "Reject"
+#    2 = "Forward to List Owner"
+#    3 = "Preserve"
+filter_action = 1
+
+## Topics options
+#
+# List topic keywords
+
+# The topic filter categorizes each incoming email message according to
+# <a href="http://docs.python.org/library/re.html">regular expression
+# filters you specify below.  If the message's Subject: or Keywords:
+# header contains a match against a topic filter, the message is
+# logically placed into a topic bucket.  Each user can then choose to
+# only receive messages from the mailing list for a particular topic
+# bucket (or buckets).  Any message not categorized in a topic bucket
+# registered with the user is not delivered to the list.
+# 
+# Note that this feature only works with regular delivery, not digest
+# delivery.
+# 
+# The body of the message can also be optionally scanned for Subject:
+# and Keywords: headers, as specified by the <a
+# href="?VARHELP=topics/topics_bodylines_limit">topics_bodylines_limit
+# configuration variable.
+#
+# legal values are:
+#    0 = "Disabled"
+#    1 = "Enabled"
+topics_enabled = 0
+
+# The topic matcher will scan this many lines of the message body
+# looking for topic keyword matches.  Body scanning stops when either
+# this many lines have been looked at, or a non-header-like body line is
+# encountered.  By setting this value to zero, no body lines will be
+# scanned (i.e. only the Keywords: and Subject: headers will be
+# scanned).  By setting this value to a negative number, then all body
+# lines will be scanned until a non-header-like line is encountered.
+# 
+topics_bodylines_limit = 5
+
+# Each topic keyword is actually a regular expression, which is matched
+# against certain parts of a mail message, specifically the Keywords:
+# and Subject: message headers. Note that the first few lines of the
+# body of the message can also contain a Keywords: and Subject: "header"
+# on which matching is also performed.
+topics = []
+
diff --git a/mailman/mklists b/mailman/mklists
index 62f9238..1d44ad7 100755
--- a/mailman/mklists
+++ b/mailman/mklists
@@ -5,5 +5,5 @@ set -e
 . /etc/local-COMMON/mailman/mklist.inc
 
 refreshlists
-#mklist "aoh" team "Art of Hosting" "list members" en "rowan@kaospilot.dk" "list.artofhosting.org" "list.artofhosting.org"
+mklist "aoh" team "Art of Hosting" "list members" en "rowan@kaospilot.dk" "list.artofhosting.org" "list.artofhosting.org"
 mklist "test" team "Art TEST of Hosting" "list members" en "" "testlist.artofhosting.org" "testlist.artofhosting.org"