ikiwiki [[plugins]] are written in perl. Each plugin is a perl module, in
the IkiWiki::Plugin namespace. The name of the plugin is typically in
lowercase, such as IkiWiki::Plugin::inline. Ikiwiki includes a
IkiWiki::Plugin::skeleton that can be fleshed out to make a useful
plugin. IkiWiki::Plugin::pagecount is another simple example.
[[toc levels=2]]
Considerations
One thing to keep in mind when writing a plugin is that ikiwiki is a wiki
compiler. So plugins influence pages when they are built, not when they
are loaded. A plugin that inserts the current time into a page, for
example, will insert the build time. Also, as a compiler, ikiwiki avoids
rebuilding pages unless they have changed, so a plugin that prints some
random or changing thing on a page will generate a static page that won't
change until ikiwiki rebuilds the page for some other reason, like the page
being edited.
Registering plugins
All plugins should use IkiWiki to import the ikiwiki plugin interface.
Plugins should, when imported, call hook() to hook into ikiwiki's
processing. The function uses named parameters, and use varies depending on
the type of hook being registered -- see below. Note that a plugin can call
the function more than once to register multiple hooks. All calls to
hook() should be passed a "type" parameter, which gives the type of
hook, a "id" paramter, which should be a unique string for this plugin, and
a "call" parameter, which is a reference to a function to call for the
hook.
An optional "scan" parameter, if set to a true value, makes the hook be
called during the preliminary scan that ikiwiki makes of updated pages,
before begining to render pages. This parameter should be set to true if
the hook modifies data in %links. Note that doing so will make the hook
be run twice per page build, so avoid doing it for expensive hooks.
An optional "last" parameter, if set to a true value, makes the hook run
after all other hooks of its type. Useful if the hook depends on some other
hook being run first.
Types of hooks
In roughly the order they are called.
getopt
hook(type => "getopt", id => "foo", call => \&getopt);
This allows for plugins to perform their own processing of command-line
options and so add options to the ikiwiki command line. It's called during
command line processing, with @ARGV full of any options that ikiwiki was
not able to process on its own. The function should process any options it
can, removing them from @ARGV, and probably recording the configuration
settings in %config. It should take care not to abort if it sees
an option it cannot process, and should just skip over those options and
leave them in @ARGV.
checkconfig
hook(type => "checkconfig", id => "foo", call => \&checkconfig);
This is useful if the plugin needs to check for or modify ikiwiki's
configuration. It's called early in the startup process. The
function is passed no values. It's ok for the function to call
error() if something isn't configured right.
filter
hook(type => "filter", id => "foo", call => \&filter);
Runs on the raw source of a page, before anything else touches it, and can
make arbitrary changes. The function is passed named parameters page and
content and should return the filtered content.
scan
hook(type => "scan", id => "foo", call => \&scan);
This is identical to a preprocess hook (see below), except that it is
called in the initial pass that scans pages for data that will be used in
later passes. Scan hooks are the only hook that should modify
preprocess
Adding a [[PreProcessorDirective]] is probably the most common use of a
plugin.
hook(type => "preprocess", id => "foo", call => \&preprocess);
Replace "foo" with the command name that will be used inside brackets for
the preprocessor directive.
Each time the directive is processed, the referenced function (preprocess
in the example above) is called, and is passed named parameters. A "page"
parameter gives the name of the page that embedded the preprocessor
directive, while a "destpage" parameter gives the name of the page the
content is going to (different for inlined pages). All parameters included
in the directive are included as named parameters as well. Whatever the
function returns goes onto the page in place of the directive.
Note that if the [[htmlscrubber]] is enabled, html in
[[PreProcessorDirective]] output is sanitised, which may limit what your
plugin can do. Also, the rest of the page content is not in html format at
preprocessor time. Text output by a preprocessor directive will be
linkified and passed through markdown (or whatever engine is used to htmlize
the page) along with the rest of the page.
htmlize
hook(type => "htmlize", id => "ext", call => \&htmlize);
Runs on the raw source of a page and turns it into html. The id parameter
specifies the filename extension that a file must have to be htmlized using
this plugin. This is how you can add support for new and exciting markup
languages to ikiwiki.
The function is passed named parameters: "page" and "content" and should
return the htmlized content.
pagetemplate
hook(type => "pagetemplate", id => "foo", call => \&pagetemplate);
[[Templates]] are filled out for many different things in ikiwiki, like
generating a page, or part of a blog page, or an rss feed, or a cgi. This
hook allows modifying those templates. The function is passed named
parameters. The "page" and "destpage" parameters are the same as for a
preprocess hook. The "template" parameter is a [[cpan HTML::Template]]
object that is the template that will be used to generate the page. The
function can manipulate that template object.
The most common thing to do is probably to call $template->param() to add
a new custom parameter to the template.
sanitize
hook(type => "sanitize", id => "foo", call => \&sanitize);
Use this to implement html sanitization or anything else that needs to
modify the body of a page after it has been fully converted to html.
The function is passed named parameters: "page" and "content", and
should return the sanitized content.
format
hook(type => "format", id => "foo", call => \&format);
The difference between format and sanitize is that sanitize only acts on
the page body, while format can modify the entire html page including the
header and footer inserted by ikiwiki, the html document type, etc.
The function is passed named parameters: "page" and "content", and
should return the formatted content.
delete
hook(type => "delete", id => "foo", call => \&delete);
Each time a page or pages is removed from the wiki, the referenced function
is called, and passed the names of the source files that were removed.
change
hook(type => "change", id => "foo", call => \&render);
Each time ikiwiki renders a change or addition (but not deletion) to the
wiki, the referenced function is called, and passed the names of the
source files that were rendered.
cgi
hook(type => "cgi", id => "foo", call => \&cgi);
Use this to hook into ikiwiki's cgi script. Each registered cgi hook is
called in turn, and passed a CGI object. The hook should examine the
parameters, and if it will handle this CGI request, output a page and
terminate the program.
auth
hook(type => "auth", id => "foo", call => \&auth);
This hook can be used to implement a different authentication method than
the standard web form. When a user needs to be authenticated, each registered
auth hook is called in turn, and passed a CGI object and a session object.
If the hook is able to authenticate the user, it should set the session
object's "name" parameter to the authenticated user's name. Note that
if the name is set to the name of a user who is not registered,
a basic registration of the user will be automatically performed.
canedit
hook(type => "canedit", id => "foo", call => \&pagelocked);
This hook can be used to implement arbitrary access methods to control when
a page can be edited using the web interface (commits from revision control
bypass it). When a page is edited, each registered canedit hook is called
in turn, and passed the page name, a CGI object, and a session object.
If edit can proceed, the hook should return "". If the edit is not allowed
by this hook, the hook should return an error message for the user to see.
If the hook has no opinion about whether the edit can proceed, return
undef, and the next plugin will be asked to decide.
formbuilder
hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
hook(type => "formbuilder", id => "foo", call => \&formbuilder);
These hooks allow tapping into the parts of ikiwiki that use [[cpan
CGI::FormBuilder]] to generate web forms. These hooks are passed named
parameters: cgi, session, and form. These are, respectively, the
CGI object, the user's CGI::Session, and a CGI::FormBuilder.
Each time a form is set up, the formbuilder_setup hook is called.
Typically the formbuilder_setup hook will check the form's title, and if
it's a form that it needs to modify, will call various methods to
add/remove/change fields, tweak the validation code for the fields, etc. It
will not validate or display the form.
Form validation and display can be overridden by the formbuilder hook.
By default, ikiwiki will do a basic validation and display of the form,
but if this hook is registered, it will stop that and let the hook take
over. This hook is passed an additional named parameter: buttons is an
array of the submit buttons for the form.
savestate
hook(type => "savestate", id => "foo", call => \&savestate);
This hook is called wheneven ikiwiki normally saves its state, just before
the state is saved. The function can save other state, modify values before
they're saved, etc.
Plugin interface
To import the ikiwiki plugin interface:
use IkiWiki '1.00';
This will import several variables and functions into your plugin's
namespace. These variables and functions are the ones most plugins need,
and a special effort will be made to avoid changing them in incompatible
ways, and to document any changes that have to be made in the future.
Note that IkiWiki also provides other variables functions that are not
exported by default. No guarantee is made about these in the future, so if
it's not exported, the wise choice is to not use it.
%config
A plugin can access the wiki's configuration via the %config
hash. The best way to understand the contents of the hash is to look at
[[ikiwiki.setup]], which sets the hash content to configure the wiki.
Other variables
If your plugin needs to access data about other pages in the wiki. It can
use the following hashes, using a page name as the key:
%links lists the names of each page that a page links to, in an array
reference.%renderedfiles lists names of the files rendered by a page, in an array
reference.%pagesources contains the name of the source file for a page.
Also, the %IkiWiki::version variable contains the version number for the
ikiwiki program.
Library functions
hook(@)
Hook into ikiwiki's processing. See the discussion of hooks above.
Note that in addition to the named parameters described above, a parameter
named no_override is supported, If it's set to a true value, then this hook
will not override any existing hook with the same id. This is useful if
the id can be controled by the user.
debug($)
Logs a debugging message. These are supressed unless verbose mode is turned
on.
error($;$)
Aborts with an error message. If the second parameter is passed, it is a
function that is called after the error message is printed, to do any final
cleanup.
Note that while any plugin can use this for a fatal error, plugins should
try to avoid dying on bad input, as that will halt the entire wiki build
and make the wiki unusable. So for example, if a [[PreProcessorDirective]]
is passed bad parameters, it's better to return an error message, which can
appear on the wiki page, rather than calling error().
template($;@)
Creates and returns a [[cpan HTML::Template]] object. The first parameter
is the name of the file in the template directory. The optional remaining
parameters are passed to HTML::Template->new.
htmlpage($)
Passed a page name, returns the base name that will be used for a the html
page created from it. (Ie, it appends ".html".)
add_depends($$)
Makes the specified page depend on the specified [[PageSpec]].
pagespec_match($$;$)
Passed a page name, a [[PageSpec]], and the location the [[PageSpec]] should
be matched against, returns true if the [[PageSpec]] matches the page. (If
the third parameter is not passed, relative PageSpecs will match relative to
the top of the wiki.)
bestlink($$)
Given a page and the text of a link on the page, determine which
existing page that link best points to. Prefers pages under a
subdirectory with the same name as the source page, failing that
goes down the directory tree to the base looking for matching
pages, as described in [[SubPage/LinkingRules]].
htmllink($$$;@)
Many plugins need to generate html links and add them to a page. This is
done by using the htmllink function. The usual way to call
htmlllink is:
htmllink($page, $page, $link)
Why is $page repeated? Because if a page is inlined inside another, and a
link is placed on it, the right way to make that link is actually:
htmllink($page, $destpage, $link)
Here $destpage is the inlining page. A destpage parameter is passed to
some of the hook functions above; the ones that are not passed it are not used
during inlining and don't need to worry about this issue.
After the three required parameters, named parameters can be used to
control some options. These are:
- noimageinline - set to true to avoid turning links into inline html images
- forcesubpage - set to force a link to a subpage
- linktext - set to force the link text to something
- anchor - set to make the link include an anchor
readfile($;$)
Given a filename, reads and returns the entire file.
The optional second parameter, if set to a true value, makes the file be read
in binary mode.
A failure to read the file will result in it dying with an error.
writefile($$$;$$)
Given a filename, a directory to put it in, and the file's content,
writes a file.
The optional fourth parameter, if set to a true value, makes the file be
written in binary mode.
The optional fifth parameter can be used to pass a function reference that
will be called to handle writing to the file. The function will be called
and passed a file descriptor it should write to, and an error recovery
function it should call if the writing fails. (You will not normally need to
use this interface.)
A failure to write the file will result in it dying with an error.
If the destination directory doesn't exist, it will first be created.
will_render($$)
Given a page name and a destination file name (not including the base
destination directory), register that the page will result in that file
being rendered. It's important to call this before writing to any file in
the destination directory.
pagetype($)
Given the name of a source file, returns the type of page it is, if it's
a type that ikiwiki knowns how to htmlize. Otherwise, returns undef.
pagename($)
Given the name of a source file, returns the name of the wiki page
that corresponds to that file.
srcfile($)
Given the name of a source file in the wiki, searches for the file in
the source directory and the underlay directory, and returns the full
path to the first file found.
displaytime($)
Given a time, formats it for display.
gettext
This is the standard gettext function, although slightly optimised.
RCS plugins
ikiwiki's support for revision control systems also uses pluggable perl
modules. These are in the IkiWiki::RCS namespace, for example
IkiWiki::RCS::svn.
Each RCS plugin must support all the IkiWiki::rcs_* functions.
See IkiWiki::RCS::Stub for the full list of functions. It's ok if
rcs_getctime does nothing except for throwing an error.
See [[about_RCS_backends]] for some more info.
PageSpec plugins
It's also possible to write plugins that add new functions to
[[PageSpecs|PageSpec]]. Such a plugin should add a function to the
IkiWiki::PageSpec package, that is named match_foo, where "foo()" is
how it will be accessed in a [[PageSpec]]. The function will be passed two
parameters: The name of the page being matched, and the thing to match
against. It should return true if the page matches.
