From b1fadc6eacaacb4d892b495e15ff82e9ba36c638 Mon Sep 17 00:00:00 2001
From: Jonas Smedegaard <dr@jones.dk>
Date: Wed, 22 Oct 2008 20:31:53 +0200
Subject: Sync with ikiwiki 2.67.

---
 ikiwiki/blog.mdwn                | 110 ++-------------------------------------
 ikiwiki/directive.mdwn           |  20 ++++---
 ikiwiki/formatting.mdwn          |   6 +--
 ikiwiki/pagespec.mdwn            |  10 +++-
 ikiwiki/pagespec/attachment.mdwn |  41 ++++-----------
 5 files changed, 40 insertions(+), 147 deletions(-)

(limited to 'ikiwiki')

diff --git a/ikiwiki/blog.mdwn b/ikiwiki/blog.mdwn
index 53d4c7a..0a5a524 100644
--- a/ikiwiki/blog.mdwn
+++ b/ikiwiki/blog.mdwn
@@ -1,108 +1,8 @@
 [[!meta robots="noindex, follow"]]
-[[!if test="enabled(inline)"
-     then="This wiki has the inline plugin **enabled**."
-     else="This wiki has the inline plugin **disabled**."]]
 
-[[!if test="enabled(inline)"
-     then="You can"
-     else="If this wiki had the inline plugin enabled, you could"]]
-turn any page on this wiki into a weblog by using the `inline`
-[[directive]]. For example:
+This page has been removed from ikiwiki's basewiki. For documentation about
+creating a blog with ikiwiki, see the documentation of the
+[[!iki ikiwiki/directive/inline desc=inline]] directive.
 
-	\[[!inline pages="blog/* and !*/Discussion" show="10" rootpage="blog"]]
-
-Any pages that match the specified [[PageSpec]] (in the example, any
-[[SubPage]] of "blog") will be part of the blog, and the newest 10
-of them will appear in the page. Note that if files that are not pages
-match the [[PageSpec]], they will be included in the feed using RSS
-enclosures, which is useful for podcasting.
-
-The optional `rootpage` parameter tells the wiki that new posts to this
-blog should default to being [[SubPages|SubPage]] of "blog", and enables a
-form at the top of the blog that can be used to add new items.
-
-If you want your blog to have an archive page listing every post ever made
-to it, you can accomplish that like this:
-
-	\[[!inline pages="blog/* and !*/Discussion" archive="yes"]]
-
-You can even create an automatically generated list of all the pages on the
-wiki, with the most recently added at the top, like this:
-
-	\[[!inline pages="* and !*/Discussion" archive="yes"]]
-
-If you want to be able to add pages to a given blog feed by tagging them,
-you can do that too. To tag a page, just make it link to a page or pages 
-that represent its tags. Then use the special `link()` [[PageSpec]] to match
-all pages that have a given tag:
-
-	\[[!inline pages="link(life)"]]
-
-Or include some tags and exclude others:
-
-	\[[!inline pages="link(debian) and !link(social)"]]
-
-## usage
-
-There are many parameters you can use with the `inline`
-directive. These are the commonly used ones:
-
-* `pages` - A [[PageSpec]] of the pages to inline.
-* `show` - Specify the maximum number of matching pages to inline.
-  Default is 10, unless archiving, when the default is to show all.
-  Set to 0 to show all matching pages.
-* `archive` - If set to "yes", only list page titles and some metadata, not
-  full contents.
-* `description` - Sets the description of the rss feed if one is generated.
-  Defaults to the name of the wiki.
-* `skip` - Specify a number of pages to skip displaying. Can be useful
-  to produce a feed that only shows archived pages.
-* `postform` - Set to "yes" to enable a form to post new pages to a
-  [[blog]].
-* `postformtext` - Set to specify text that is displayed in a postform.
-* `rootpage` - Enable the postform, and allows controling where
-  newly posted pages should go, by specifiying the page that
-  they should be a [[SubPage]] of.
-
-Here are some less often needed parameters:
-
-* `actions` - If set to "yes" add links to the bottom of the inlined pages 
-  for editing and discussion (if they would be shown at the top of the page
-  itself).
-* `rss` - controls generation of an rss feed. If the wiki is configured to
-  generate rss feeds by default, set to "no" to disable. If the wiki is
-  configured to `allowrss`, set to "yes" to enable.
-* `atom` - controls generation of an atom feed. If the wiki is configured to
-  generate atom feeds by default, set to "no" to disable. If the wiki is
-  configured to `allowatom`, set to "yes" to enable.
-* `feeds` - controls generation of all types of feeds. Set to "no" to
-  disable generating any feeds.
-* `template` - Specifies the template to fill out to display each inlined
-  page. By default the `inlinepage` template is used, while
-  the `archivepage` template is used for archives. Set this parameter to
-  use some other, custom template, such as the `titlepage` template that
-  only shows post titles. Note that you should still set `archive=yes` if
-  your custom template does not include the page content.
-* `raw` - Rather than the default behavior of creating a [[blog]],
-  if raw is set to "yes", the page will be included raw, without additional
-  markup around it, as if it were a literal part of the source of the 
-  inlining page.
-* `sort` - Controls how inlined pages are sorted. The default, "age" is to
-  sort newest created pages first. Setting it to "title" will sort pages by
-  title, and "mtime" sorts most recently modified pages first.
-* `reverse` - If set to "yes", causes the sort order to be reversed.
-* `feedshow` - Specify the maximum number of matching pages to include in
-  the rss/atom feeds. The default is the same as the `show` value above.
-* `feedonly` - Only generate the feed, do not display the pages inline on
-  the page.
-* `quick` - Build archives in quick mode, without reading page contents for
-  metadata. By default, this also turns off generation of any feeds.
-* `timeformat` - Use this to specify how to display the time or date for pages
-  in the blog. The format string is passed to the strftime(3) function.
-* `feedpages` - A [[PageSpec]] of inlined pages to include in the rss/atom
-  feeds. The default is the same as the `pages` value above, and only pages
-  matches by that value are included, but some of those can be excluded by
-  specifying a tighter [[PageSpec]] here.
-* `guid` - If a URI is given here (perhaps a UUID prefixed with `urn:uuid:`),
-  the Atom feed will have this as its `<id>`. The default is to use the URL
-  of the page containing the `inline` directive.
+Please update your links, as this redirection page will be removed in a
+future ikiwiki release.
diff --git a/ikiwiki/directive.mdwn b/ikiwiki/directive.mdwn
index a0a4e1f..c4342de 100644
--- a/ikiwiki/directive.mdwn
+++ b/ikiwiki/directive.mdwn
@@ -1,5 +1,5 @@
 [[!meta robots="noindex, follow"]]
-Directives are similar to a [[WikiLink]] in form, except they
+Directives are similar to a [[ikiwiki/WikiLink]] in form, except they
 begin with `!` and may contain parameters. The general form is:
 
 	\[[!directive param="value" param="value"]]
@@ -29,11 +29,17 @@ of text with triple-quotes:
 	"""]]
 
 ikiwiki also has an older syntax for directives, which requires a
-space in directives to distinguish them from [[wikilinks|wikilink]].  This
-syntax has several disadvantages: it requires a space after directives with no
-parameters (such as `\[[pagecount ]]`), and it prohibits spaces in
-[[wikilinks|wikilink]].  ikiwiki now provides the `!`-prefixed syntax shown
-above as the preferred alternative.  However, ikiwiki still supports wikis
-using the older syntax, if the `prefix_directives` option is not enabled.
+space in directives to distinguish them from [[wikilinks|ikiwiki/wikilink]].
+This syntax has several disadvantages: it requires a space after directives
+with no parameters (such as `\[[pagecount ]]`), and it prohibits spaces in
+[[wikilinks|ikiwiki/wikilink]].  ikiwiki now provides the `!`-prefixed syntax
+shown above as the preferred alternative.  However, ikiwiki still supports
+wikis using the older syntax, if the `prefix_directives` option is not enabled.
 For backward compatibility with existing wikis, this option currently
 defaults to off, so ikiwiki supports the old syntax.
+
+[[!if test="enabled(listdirectives)" then="""
+Here is a list of currently available directives in this wiki:
+
+[[!listdirectives ]]
+"""]]
diff --git a/ikiwiki/formatting.mdwn b/ikiwiki/formatting.mdwn
index 0145f9d..2ed5cc2 100644
--- a/ikiwiki/formatting.mdwn
+++ b/ikiwiki/formatting.mdwn
@@ -77,7 +77,7 @@ you use the following additional features:
 
 * Insert various [[directives|directive]] onto a page to perform useful
   actions.
-[[!if test="enabled(toc) or enabled(meta) or (enabled(inline) and blog)" then="""
+[[!if test="enabled(toc) or enabled(meta) or enabled(inline)" then="""
   For example, you can:
 """]]
 
@@ -94,8 +94,8 @@ you use the following additional features:
 	\[[!meta title="full page title"]]
 """]]
 
-[[!if test="enabled(inline) and blog" then="""
-  * Create a [[blog]] by inlining a set of pages:
+[[!if test="enabled(inline)" then="""
+  * Create a blog by inlining a set of pages:
 
 	\[[!inline pages="blog/*"]]
 """]]
diff --git a/ikiwiki/pagespec.mdwn b/ikiwiki/pagespec.mdwn
index 156e3f6..c78666c 100644
--- a/ikiwiki/pagespec.mdwn
+++ b/ikiwiki/pagespec.mdwn
@@ -22,8 +22,7 @@ match all pages except for Discussion pages and the SandBox:
 
 	* and !SandBox and !*/Discussion
 
-Some more elaborate limits can be added to what matches using any of these
-functions:
+Some more elaborate limits can be added to what matches using these functions:
 
 * "`link(page)`" - match only pages that link to a given page (or glob)
 * "`backlink(page)`" - match only pages that a given page links to
@@ -41,6 +40,13 @@ functions:
 * "`title(glob)`", "`author(glob)`", "`authorurl(glob)`",
   "`license(glob)`", "`copyright(glob)`" - match pages that have the given
   metadata, matching the specified glob.
+* "`user(username)`" - tests whether a modification is being made by a
+  user with the specified username. If openid is enabled, an openid can also
+  be put here.
+* "`admin()`" - tests whether a modification is being made by one of the
+  wiki admins.
+* "`ip(address)`" - tests whether a modification is being made from the
+  specified IP address.
 
 For example, to match all pages in a blog that link to the page about music
 and were written in 2005:
diff --git a/ikiwiki/pagespec/attachment.mdwn b/ikiwiki/pagespec/attachment.mdwn
index 6b86c51..2d33db7 100644
--- a/ikiwiki/pagespec/attachment.mdwn
+++ b/ikiwiki/pagespec/attachment.mdwn
@@ -16,41 +16,22 @@ check all attachments for virii, something like this could be used:
 The regular [[ikiwiki/PageSpec]] syntax is expanded with the following
 additional tests:
 
-* maxsize(size)
-
-  Tests whether the attachment is no larger than the specified size.
-  The size defaults to being in bytes, but "kb", "mb", "gb" etc can be
-  used to specify the units.
+* "`maxsize(size)`" - Tests whether the attachment is no larger than the
+  specified size. The size defaults to being in bytes, but "kb", "mb", "gb"
+  etc can be used to specify the units.
   
-* minsize(size)
-
-  Tests whether the attachment is no smaller than the specified size.
-
-* ispage()
+* "`minsize(size)`" - Tests whether the attachment is no smaller than the
+  specified size.
 
-  Tests whether the attachment will be treated by ikiwiki as a wiki page.
-  (Ie, if it has an extension of ".mdwn", or of any other enabled page
-  format).
+* "`ispage()`" - Tests whether the attachment will be treated by ikiwiki as a
+  wiki page. (Ie, if it has an extension of ".mdwn", or of any other enabled
+  page format).
 
   So, if you don't want to allow wiki pages to be uploaded as attachments,
   use `!ispage()` ; if you only want to allow wiki pages to be uploaded
   as attachments, use `ispage()`.
 
-* user(username)
-
-  Tests whether the attachment is being uploaded by a user with the
-  specified username. If openid is enabled, an openid can also be put here.
-
-* ip(address)
-
-  Tests whether the attacment is being uploaded from the specified IP
-  address.
-
-* mimetype(foo/bar)
-
-  This checks the MIME type of the attachment. You can include a glob
-  in the type, for example `mimetype(image/*)`.
-
-* virusfree()
+* "`mimetype(foo/bar)`" - This checks the MIME type of the attachment. You can
+  include a glob in the type, for example `mimetype(image/*)`.
 
-  Checks the attachment with an antiviral program.
+* "`virusfree()`" - Checks the attachment with an antiviral program.
-- 
cgit v1.2.3


From ef6324a81724619a7811a964200208f5c808ac10 Mon Sep 17 00:00:00 2001
From: Jonas Smedegaard <dr@jones.dk>
Date: Thu, 23 Oct 2008 03:57:20 +0200
Subject: Apply translation from po-file.

---
 directive.mdwn                     |  47 ++++++------
 ikiwiki.mdwn                       |  14 ++--
 ikiwiki/blog.mdwn                  |  10 +--
 ikiwiki/directive.mdwn             |  47 ++++++------
 ikiwiki/formatting.mdwn            |  88 ++++++++++++-----------
 ikiwiki/markdown.mdwn              |  21 +++---
 ikiwiki/openid.mdwn                |  29 ++++----
 ikiwiki/pagespec.mdwn              | 142 ++++++++++++++++++-------------------
 ikiwiki/pagespec/attachment.mdwn   |  48 ++++++-------
 ikiwiki/preprocessordirective.mdwn |   7 +-
 ikiwiki/searching.mdwn             |  31 ++++----
 ikiwiki/subpage.mdwn               |  20 +++---
 ikiwiki/subpage/linkingrules.mdwn  |  55 +++++++-------
 ikiwiki/wikilink.mdwn              |  52 +++++++-------
 index.mdwn                         |   7 +-
 recentchanges.mdwn                 |   4 +-
 sandbox.mdwn                       |  33 ++++-----
 shortcuts.mdwn                     |  42 +++++------
 templates.mdwn                     | 102 +++++++++++++-------------
 templates/note.mdwn                |   8 +--
 templates/popup.mdwn               |  17 +++--
 21 files changed, 415 insertions(+), 409 deletions(-)

(limited to 'ikiwiki')

diff --git a/directive.mdwn b/directive.mdwn
index c4342de..ea67469 100644
--- a/directive.mdwn
+++ b/directive.mdwn
@@ -1,45 +1,44 @@
 [[!meta robots="noindex, follow"]]
-Directives are similar to a [[ikiwiki/WikiLink]] in form, except they
-begin with `!` and may contain parameters. The general form is:
+Direktiver ligner et [[ikiwiki/WikiLink]] i form, undtagen at de begynder
+med `!` og kan indeholde parametre. Generelt er formen:
 
-	\[[!directive param="value" param="value"]]
+	\[[!direktiv param="værdi" param="værdi"]]
 
-This gets expanded before the rest of the page is processed, and can be used
-to transform the page in various ways.
+Dette udvides før resten af siden udarbejdes, og kan bruges til at omforme
+siden på forskellige måder.
 
-The quotes around values can be omitted if the value is a simple word.
-Also, some directives may use parameters without values, for example:
+Citationen omkring værdier kan udelades hvis værdien er et simpelt
+ord. Desuden kan nogle direktiver bruge parametre uden værdier. Eksempel:
 
 	\[[!tag foo]]
 
-A directive does not need to all be on one line, it can be
-wrapped to multiple lines if you like:
+Et direktiv behøver ikke at blive holdt på een linje, det kan bredes ud over
+flere linjer hvis du har lyst:
 	
-	\[[!directive foo="baldersnatch"
+	\[[!direktiv foo="baldersnatch"
 	bar="supercalifragilisticexpialidocious" baz=11]]
 
-Also, multiple lines of *quoted* text can be used for a value.
-To allow quote marks inside the quoted text, delimit the block
-of text with triple-quotes:
+Flere linjer *citeret* tekst kan også bruges som værdi. For at tillade
+citation i den citerede tekst skal du adskille blokken med trippel-citat:
 
-	\[[!directive text="""
+	\[[!direktiv tekst="""
 	1. "foo"
 	2. "bar"
 	3. "baz"
 	"""]]
 
-ikiwiki also has an older syntax for directives, which requires a
-space in directives to distinguish them from [[wikilinks|ikiwiki/wikilink]].
-This syntax has several disadvantages: it requires a space after directives
-with no parameters (such as `\[[pagecount ]]`), and it prohibits spaces in
-[[wikilinks|ikiwiki/wikilink]].  ikiwiki now provides the `!`-prefixed syntax
-shown above as the preferred alternative.  However, ikiwiki still supports
-wikis using the older syntax, if the `prefix_directives` option is not enabled.
-For backward compatibility with existing wikis, this option currently
-defaults to off, so ikiwiki supports the old syntax.
+Ikiwiki har også en ældre syntaks til direktiver, som kræver et mellemrum i
+direktiver for at skelne dem fra [[wikilinks|ikiwiki/wikilink]].  Denne
+syntaks har flere ulemper: den kræver et mellemrum efter direktiver uden
+parametre (såsom `\[[pagecount ]]`), og den forbyder mellemrum i
+[[wikilinks|ikiwiki/wikilink]]. Ikiwiki har nu den `!`-foranstillede syntaks
+vist ovenfor som det foretrukne alternativ. Ikiwiki understøtter dog fortsat
+den ældre syntaks, hvis ikke `prefix_directives`-valget er aktiveret. For
+bagudkompatibilitet med eksisterende wikier er dette valg som standard
+deaktiveret i øjeblikket, så ikiwiki understøtter den ældre syntaks.
 
 [[!if test="enabled(listdirectives)" then="""
-Here is a list of currently available directives in this wiki:
+Her er en oversigt over konkret tilgængelige direktiver i for denne wiki:
 
 [[!listdirectives ]]
 """]]
diff --git a/ikiwiki.mdwn b/ikiwiki.mdwn
index e0a971d..a19794e 100644
--- a/ikiwiki.mdwn
+++ b/ikiwiki.mdwn
@@ -1,16 +1,16 @@
 [[!meta robots="noindex, follow"]]
-This wiki is powered by [ikiwiki](http://ikiwiki.info/).
+Denne wiki er drevet af [ikiwiki](http://ikiwiki.info/).
 [[!if test="enabled(version)"
-     then="(Currently running version [[!version ]].)"
+     then="(kører i øjeblikket version [[!version ]].)"
 ]]
 
-Some documentation on using ikiwiki:
+Noget dokumentation om brug af ikiwiki:
 
-* [[ikiwiki/formatting]]
+* [[formatering|ikiwiki/formatting]]
 * [[ikiwiki/wikilink]]
-* [[ikiwiki/subpage]]
+* [[underside|ikiwiki/subpage]]
 * [[ikiwiki/pagespec]]
-* [[ikiwiki/directive]]
+* [[direktiv|ikiwiki/directive]]
 * [[ikiwiki/markdown]]
 * [[ikiwiki/openid]]
-* [[ikiwiki/searching]]
+* [[søgning|ikiwiki/searching]]
diff --git a/ikiwiki/blog.mdwn b/ikiwiki/blog.mdwn
index 0a5a524..dbdf83f 100644
--- a/ikiwiki/blog.mdwn
+++ b/ikiwiki/blog.mdwn
@@ -1,8 +1,8 @@
 [[!meta robots="noindex, follow"]]
 
-This page has been removed from ikiwiki's basewiki. For documentation about
-creating a blog with ikiwiki, see the documentation of the
-[[!iki ikiwiki/directive/inline desc=inline]] directive.
+Denne side er blevet fjernet fra ikiwiki's basewiki. For dokumentation om
+oprettelse af en blog med ikiwiki se dokumentationen til [[!iki
+ikiwiki/directive/inline desc=inline]]-direktivet.
 
-Please update your links, as this redirection page will be removed in a
-future ikiwiki release.
+Opdatér dine henvisninger, da denne omdirigeringsside bliver fjernet i en
+fremtidig udgave af ikiwiki.
diff --git a/ikiwiki/directive.mdwn b/ikiwiki/directive.mdwn
index c4342de..ea67469 100644
--- a/ikiwiki/directive.mdwn
+++ b/ikiwiki/directive.mdwn
@@ -1,45 +1,44 @@
 [[!meta robots="noindex, follow"]]
-Directives are similar to a [[ikiwiki/WikiLink]] in form, except they
-begin with `!` and may contain parameters. The general form is:
+Direktiver ligner et [[ikiwiki/WikiLink]] i form, undtagen at de begynder
+med `!` og kan indeholde parametre. Generelt er formen:
 
-	\[[!directive param="value" param="value"]]
+	\[[!direktiv param="værdi" param="værdi"]]
 
-This gets expanded before the rest of the page is processed, and can be used
-to transform the page in various ways.
+Dette udvides før resten af siden udarbejdes, og kan bruges til at omforme
+siden på forskellige måder.
 
-The quotes around values can be omitted if the value is a simple word.
-Also, some directives may use parameters without values, for example:
+Citationen omkring værdier kan udelades hvis værdien er et simpelt
+ord. Desuden kan nogle direktiver bruge parametre uden værdier. Eksempel:
 
 	\[[!tag foo]]
 
-A directive does not need to all be on one line, it can be
-wrapped to multiple lines if you like:
+Et direktiv behøver ikke at blive holdt på een linje, det kan bredes ud over
+flere linjer hvis du har lyst:
 	
-	\[[!directive foo="baldersnatch"
+	\[[!direktiv foo="baldersnatch"
 	bar="supercalifragilisticexpialidocious" baz=11]]
 
-Also, multiple lines of *quoted* text can be used for a value.
-To allow quote marks inside the quoted text, delimit the block
-of text with triple-quotes:
+Flere linjer *citeret* tekst kan også bruges som værdi. For at tillade
+citation i den citerede tekst skal du adskille blokken med trippel-citat:
 
-	\[[!directive text="""
+	\[[!direktiv tekst="""
 	1. "foo"
 	2. "bar"
 	3. "baz"
 	"""]]
 
-ikiwiki also has an older syntax for directives, which requires a
-space in directives to distinguish them from [[wikilinks|ikiwiki/wikilink]].
-This syntax has several disadvantages: it requires a space after directives
-with no parameters (such as `\[[pagecount ]]`), and it prohibits spaces in
-[[wikilinks|ikiwiki/wikilink]].  ikiwiki now provides the `!`-prefixed syntax
-shown above as the preferred alternative.  However, ikiwiki still supports
-wikis using the older syntax, if the `prefix_directives` option is not enabled.
-For backward compatibility with existing wikis, this option currently
-defaults to off, so ikiwiki supports the old syntax.
+Ikiwiki har også en ældre syntaks til direktiver, som kræver et mellemrum i
+direktiver for at skelne dem fra [[wikilinks|ikiwiki/wikilink]].  Denne
+syntaks har flere ulemper: den kræver et mellemrum efter direktiver uden
+parametre (såsom `\[[pagecount ]]`), og den forbyder mellemrum i
+[[wikilinks|ikiwiki/wikilink]]. Ikiwiki har nu den `!`-foranstillede syntaks
+vist ovenfor som det foretrukne alternativ. Ikiwiki understøtter dog fortsat
+den ældre syntaks, hvis ikke `prefix_directives`-valget er aktiveret. For
+bagudkompatibilitet med eksisterende wikier er dette valg som standard
+deaktiveret i øjeblikket, så ikiwiki understøtter den ældre syntaks.
 
 [[!if test="enabled(listdirectives)" then="""
-Here is a list of currently available directives in this wiki:
+Her er en oversigt over konkret tilgængelige direktiver i for denne wiki:
 
 [[!listdirectives ]]
 """]]
diff --git a/ikiwiki/formatting.mdwn b/ikiwiki/formatting.mdwn
index 2ed5cc2..cead343 100644
--- a/ikiwiki/formatting.mdwn
+++ b/ikiwiki/formatting.mdwn
@@ -1,30 +1,30 @@
-[[!meta title="Formatting wiki pages"]]
+[[!meta title="Formatering af wikisider"]]
 [[!meta robots="noindex, follow"]]
 
-Text on this wiki is, by default, written in a form very close to how you
-might write text for an email message. This style of text formatting is
-called [[MarkDown]], and it works like this:
+Teksten på denne wiki er, som udgangspunkt, skrevet på en måde som ligger
+tæt op ad hvordan du muligvis formulerer dig i email-beskeder. Denne form
+for tekstformatering kaldes [[MarkDown]], og det fungerer sådan her:
 
-Leave blank lines between paragraphs.
+hold afstand med blanke linjer mellem afsnit.
 
-You can \**emphasise*\* or \*\***strongly emphasise**\*\* text by placing it
-in single or double asterisks.
+du kan \**fremhæve*\* eller \*\***kraftigt fremhæve**\*\* tekst ved at
+placere det med enkelte eller dobbelte asterisker (stjerner) omkring.
 
-To create a list, start each line with an asterisk:
+En liste oprettes ved at begynde hver linje med en asterisk:
 
-* "* this is my list"
-* "* another item"
+* "* dette er min liste"
+* "* et andet emne"
 
-To make a numbered list, start each line with a number (any number will
-do) followed by a period:
+En nummereret liste laves ved at starte hver linje med et nummer (ethvert
+nummer kan bruges) efterfulgt af punktum:
 
-1. "1. first line"
-2. "2. second line"
-2. "2. third line"
+1. "1. første linje"
+2. "2. anden linje"
+2. "2. tredje linje"
 
-To create a header, start a line with one or more `#` characters followed
-by a space and the header text. The number of `#` characters controls the
-size of the header:
+En overskrift eller en sektion er en linje med et eller flere `#`-tegn
+efterfulgt af et mellemrum og overskriftsteksten. Antallet af `#`-tegn
+styrer overskriftens størrelse:
 
 # # h1
 ## ## h2
@@ -33,74 +33,76 @@ size of the header:
 ##### ##### h5
 ###### ###### h6
 
-To create a horizontal rule, just write three or more dashes or stars on
-their own line:
+En vandret skillelinje oprettes ved at skrive tre eller flere bindestreger
+eller stjerner på en linje for sig selv.
 
 ----
 
-To quote someone, prefix the quote with ">":
+Citater angives ved at sætte ">" foran hver linje:
 
-> To be or not to be,
-> that is the question.
+> At være eller ikke være,
+> det er spørgsmålet.
 
-To write a code block, indent each line with a tab or 4 spaces:
+En kodeblok skrives ved at indrykke hver linje med eet tabulator-tegn eller
+4 mellemrum:
 
 	10 PRINT "Hello, world!"
 	20 GOTO 10
 
-To link to an url or email address, you can just put the
-url in angle brackets: <<http://ikiwiki.info>>, or you can use the
-form \[link text\]\(url\)
+Du kan henvise til en URL eller en email-adresse ved at putte addressen i
+vinkelklammer: <<http://ikiwiki.info>>, eller du kan bruge formen
+\[henvisningstekst\]\(adresse\)
 
 ----
 
-In addition to basic html formatting using [[MarkDown]], this wiki lets
-you use the following additional features:
+Udover normal html-formatering med [[MarkDown]], kan du med denne wiki bruge
+følgende ekstra finesser:
 
-* To link to another page on the wiki, place the page's name inside double
-  square brackets. So you would use `\[[WikiLink]]` to link to [[WikiLink]].
+* Henvise til en anden side på wikien ved at skrive sidenavnet med dobbelte
+  lodrette klammer omkring. Udtrykket `\[[WikiLink]]` henviser til
+  [[WikiLink]].
 
 [[!if test="enabled(smiley) and smileys" then="""
-* Insert [[smileys]] and some other useful symbols. :-)
+* Indsætte [[smileys]] og andre anvendelige symboler. :-)
 """]]
 
 [[!if test="enabled(shortcut) and shortcuts" then="""
-* Use [[shortcuts]] to link to common resources.
+* Bruge [[genveje|shortcuts]] til at henvise til gængse ressourcer.
 
 	\[[!wikipedia War\_of\_1812]]
 """]]
 
 [[!if test="enabled(template) and templates" then="""
-* Create and fill out [[templates]] for repeated chunks of
-  parameterized wiki text.
+* Oprette og udfylde [[skabeloner|templates]] for gentagne klumper af
+  parameteriseret wikitekst.
 """]]
 
-* Insert various [[directives|directive]] onto a page to perform useful
-  actions.
+* Indsæt diverse [[directiver|directive]] på en side for at udføre nyttige
+  handlinger.
 [[!if test="enabled(toc) or enabled(meta) or enabled(inline)" then="""
-  For example, you can:
+  Eksempelvis kan du:
 """]]
 
 [[!if test="enabled(toc)" then="""
-  * Add a table of contents to a page:
+  * Tilføje en indholdsfortegnelse til en side:
 
 	\[[!toc]]
 """]]
 
 
 [[!if test="enabled(meta)" then="""
-  * Change the title of a page:
+  * Ændre titlen på en side:
 
-	\[[!meta title="full page title"]]
+	\[[!meta title="fuldstændige sidetitel"]]
 """]]
 
 [[!if test="enabled(inline)" then="""
-  * Create a blog by inlining a set of pages:
+  * Oprette en [[blog]] ved at indlejre et udvalg af sider:
 
 	\[[!inline pages="blog/*"]]
 """]]
 
 [[!if test="enabled(listdirectives)" then="""
-  Full list of [[directives|directive]] enabled for this wiki:
+  Komplet oversigt over [[directiver|directive]] aktiveret for denne wiki:
   [[!listdirectives ]]
 """]]
diff --git a/ikiwiki/markdown.mdwn b/ikiwiki/markdown.mdwn
index a419094..087b274 100644
--- a/ikiwiki/markdown.mdwn
+++ b/ikiwiki/markdown.mdwn
@@ -1,13 +1,14 @@
 [[!meta robots="noindex, follow"]]
-[Markdown](http://daringfireball.net/projects/markdown/)
-is a minimal markup language that resembles plain text as used in
-email messages. It is the markup language used by this wiki by default.
+[Markdown](http://daringfireball.net/projects/markdown/) er et minimalt
+opmærkningssprog som afspejler simpel tekst som det bruges i
+email-beskeder. Det er standard opmærkningssprog for denne wiki.
 
-For documentation about the markdown syntax, see [[formatting]] and
-[Markdown: syntax](http://daringfireball.net/projects/markdown/syntax). A
-[markdown mode](http://jblevins.org/projects/markdown-mode/) for 
-emacs can help in editing.
+Du kan læse dokumentation til markdown-syntaksen under
+[[formatering|formatting]] og [Markdown:
+syntax](http://daringfireball.net/projects/markdown/syntax). En [markdown
+modus](http://jblevins.org/projects/markdown-mode/) til emacs kan være en
+hjælp ved redigering.
 
-Note that [[WikiLinks|WikiLink]] and [[directives|directive]] are not part
-of the markdown syntax, and are the only bit of markup that this wiki
-handles internally.
+Bemærk at [[WikiLinks|WikiLink]] og [[direktiver|directive]] ikke er en del
+af markdown-syntaksen, og er de eneste stumper opmærkning som denne wiki
+håndterer internt.
diff --git a/ikiwiki/openid.mdwn b/ikiwiki/openid.mdwn
index dd851e5..ee84bea 100644
--- a/ikiwiki/openid.mdwn
+++ b/ikiwiki/openid.mdwn
@@ -2,33 +2,36 @@
 [[!meta robots="noindex, follow"]]
 
 [[!if test="enabled(openid)"
-     then="This wiki has OpenID **enabled**."
-     else="This wiki has OpenID **disabled**."]]
+     then="Denne wiki har OpenID **aktiveret**."
+     else="Denne wiki har OpenID **deaktiveret**."]]
 
-[OpenID](http://openid.net) is a decentralized authentication mechanism
-that allows you to have one login that you can use on a growing number of
-websites.
+[OpenID](http://openid.net) er en decentral ægthedsmekanisme som giver dig
+mulighed for at have eet login som du kan bruge på et voksende antal
+websteder.
 
-To sign up for an OpenID, visit one of the following identity providers:
+Du kan registrere en OpenID ved at besøge en af de følgende
+identitetsudbydere:
 
 * [MyOpenID](https://www.myopenid.com/)
 * [GetOpenID](https://getopenid.com/)
 * [Videntity](http://videntity.org/)
 * [LiveJournal](http://www.livejournal.com/openid/)
 * [TrustBearer](https://openid.trustbearer.com/)
-* or any of the [many others out there](http://openiddirectory.com/openid-providers-c-1.html).
+* eller en af de [mange andre
+  derude](http://openiddirectory.com/openid-providers-c-1.html).
 
-Your OpenID is the URL that you are given when you sign up.
+Din OpenID er den URL som du får når du registrerer dig.
 [[!if test="enabled(openid)" then="""
-To sign in to this wiki using OpenID, just enter it in the OpenID field in the
-signin form. You do not need to give this wiki a password or go through any
-registration process when using OpenID.
+Du kan logge på denne wiki med OpenID, ved blot at angive den i
+OpenID-feltet på login-siden. Du behøves ikke at oplyse din adgangskode til
+denne wiki eller at gennemgå en registreringsproces når du bruger OpenID.
 """]]
 
 ---
 
-It's also possible to make a page in the wiki usable as an OpenID url,
-by delegating it to an openid server. Here's an example of how to do that:
+Det er også muligt at lave en side i wikien brugbar som en OpenID URL, ved
+at delegere den til en openid server. Her er et eksempel på hvordan det kan
+gøres:
 
 	\[[!meta openid="http://yourid.myopenid.com/"
 	       server="http://www.myopenid.com/server"]]
diff --git a/ikiwiki/pagespec.mdwn b/ikiwiki/pagespec.mdwn
index c78666c..59a5c84 100644
--- a/ikiwiki/pagespec.mdwn
+++ b/ikiwiki/pagespec.mdwn
@@ -1,91 +1,91 @@
 [[!meta robots="noindex, follow"]]
-To select a set of pages, such as pages that are locked, pages
-whose commit emails you want subscribe to, or pages to combine into a
-blog, the wiki uses a PageSpec. This is an expression that matches
-a set of pages.
+Til at angive et udvalg af sider, eksempelvis låste sider, sider du vil
+abonnere på ændringer til, eller sider som skal udgøre en blog, anvender
+wikien et PageSpec. dette er et udtryk som modsvarer et bestemt udvalg af
+sider.
 
-The simplest PageSpec is a simple list of pages. For example, this matches
-any of the three listed pages:
+Det simpleste PageSpec er simpelthen en opremsning af sider med "or" imellem
+("or" betyder "eller" på engelsk). Dette modsvarer eksempelvis enhver af de
+tre nævnte sider:
 
 	foo or bar or baz
 
-More often you will want to match any pages that have a particular thing in
-their name. You can do this using a glob pattern. "`*`" stands for any part
-of a page name, and "`?`" for any single letter of a page name. So this
-matches all pages about music, and any [[SubPage]]s of the SandBox, but does
-not match the SandBox itself:
+Mere hyppigt har du dog brug for at at at modsvare sider med noget tilfælles
+i deres navne. Dette kan du udtrykke med et "glob-mønster". "`*`" står for
+enhver del af sidenavnet, og "`?`" for ethvert enkeltbogstav i
+sidenavnet. Så dette modsvarer alle sider om musik, og alle
+[[UnderSider||SubPage]] til sandkassen, men ikke selve sandkasse-siden:
 
-	*music* or SandBox/*
+	*musik* or SandBox/*
 
-You can also prefix an item with "`!`" to skip pages that match it. So to
-match all pages except for Discussion pages and the SandBox:
+Du kan også angive "`!`" foran et emne for at undgå sider som modsvarer
+det. Så for at modsvare alle sider undtagen diskussionssider og sandkassen:
 
 	* and !SandBox and !*/Discussion
 
-Some more elaborate limits can be added to what matches using these functions:
-
-* "`link(page)`" - match only pages that link to a given page (or glob)
-* "`backlink(page)`" - match only pages that a given page links to
-* "`creation_month(month)`" - match only pages created on the given month
-* "`creation_day(mday)`" - or day of the month
-* "`creation_year(year)`" - or year
-* "`created_after(page)`" - match only pages created after the given page
-  was created
-* "`created_before(page)`" - match only pages created before the given page
-  was created
-* "`glob(someglob)`" - match pages that match the given glob. Just writing
-  the glob by itself is actually a shorthand for this function.
-* "`internal(glob)`" - like `glob()`, but matches even internal-use 
-  pages that globs do not usually match.
-* "`title(glob)`", "`author(glob)`", "`authorurl(glob)`",
-  "`license(glob)`", "`copyright(glob)`" - match pages that have the given
-  metadata, matching the specified glob.
-* "`user(username)`" - tests whether a modification is being made by a
-  user with the specified username. If openid is enabled, an openid can also
-  be put here.
-* "`admin()`" - tests whether a modification is being made by one of the
-  wiki admins.
-* "`ip(address)`" - tests whether a modification is being made from the
-  specified IP address.
-
-For example, to match all pages in a blog that link to the page about music
-and were written in 2005:
-
-	blog/* and link(music) and creation_year(2005)
-
-Note the use of "and" in the above example, that means that only pages that
-match each of the three expressions match the whole. Use "and" when you
-want to combine expression like that; "or" when it's enough for a page to
-match one expression. Note that it doesn't make sense to say "index and
-SandBox", since no page can match both expressions.
-
-More complex expressions can also be created, by using parentheses for
-grouping. For example, to match pages in a blog that are tagged with either
-of two tags, use:
+Resultaterne kan begrænses mere nuanceret med disse funktioner:
+
+* "`link(side)`" - modsvarer kun sider som henviser til en given side (eller
+  glob)
+* "`backlink(side)`" - modsvarer kun sider som en given side henviser til
+* "`creation_month(måned)`" - modsvarer kun sider oprettet den givne måned
+* "`creation_day(månedsdag)`" - eller dag på måneden
+* "`creation_year(år)`" - eller år
+* "`created_after(side)`" - modsvarer kun sider oprettet efter den givne
+  side blev oprettet
+* "`created_before(side)`" - modsvarer kun sider oprettet før den givne side
+  blev oprettet
+* "`glob(nogetglob)`" - modsvarer sider som modsvarer det givne glob. Blot
+  at skrive glob'et alene er faktisk en genvej til denne funktion.
+* "`internal(glob)`" - lissom `glob()`, men modsvarer også internt anvendte
+  sider som glob normalt ikke modsvarer.
+* "`title(glob)`", "`author(glob)`", "`authorurl(glob)`", "`license(glob)`",
+  "`copyright(glob)`" - modsvarer sider med de givne metadata, som modsvarer
+  det angivne glob.
+* "`user(brugernavn)`" - tester hvorvidt en ændring foretages af en bruger
+  med det angivne  brugernavn. Hvis openid er aktiveret, kan en openid også
+  bruges her.
+* "`admin()`" - tester hvorvidt en ændring foretages af en af
+  wiki-administratorerne.
+* "`ip(adresse)`" - tester hvorvidt en ændring foretages fra den angivne
+  IP-adresse.
+
+For eksempelvis at modsvare alle sider i en blog som henviser til en side om
+musik og som blev skrevet i 2005:
+
+	blog/* and link(musik) and creation_year(2005)
+
+Bemærk brugen af "and" i eksemplet ovenfor ("and" betyder "og" på engelsk),
+som betyder at kun sider der modsvarer hver af de tre udtryk modsvarer det
+hele. Brug "and" når du vil kombinere udtryk på den måde; "or" når det er
+nok at én side modsvarer et udtryk. Bemærk at det ikke giver mening at sige
+"index and SandBox", da ingen sider kan modsvare begge udtryk.
+
+Mere komplekse udtryk kan dannes ved at gruppere med paranteser. Eksempelvis
+modsvarer dette sider i en blog som er mærket af med en af to mærkater:
 
 	blog/* and (link(tag/foo) or link(tag/bar))
 
-Note that page names in PageSpecs are matched against the absolute
-filenames of the pages in the wiki, so a pagespec "foo" used on page
-"a/b" will not match a page named "a/foo" or "a/b/foo". To match
-relative to the directory of the page containing the pagespec, you can
-use "./". For example, "./foo" on page "a/b" matches page "a/foo".
+Bemærk at PageSpecs for sidenavne modsvares som de absolutte filnavne for
+siderne i wikien, så et pagespec "foo" brugt på siden "a/b" vil ikke
+modsvare siderne navngivet "a/foo" eller "a/b/foo". For at modsvare relativt
+til samme mappe som siden der indeholder pagespec'et kan du bruge
+"./". Eksempelvis modsvarer "./foo" på siden "a/b" siden "a/foo".
 
-## Old syntax
+## Gammel syntaks
 
-The old PageSpec syntax was called a "GlobList", and worked differently in
-two ways:
+Den gamle PageSpec-syntaks blev kaldt en "GlobList", og fungerede anderledes
+på to måder:
 
-1. "and" and "or" were not used; any page matching any item from the list
-   matched.
-2. If an item was prefixed with "`!`", then no page matching that item
-   matched, even if it matched an earlier list item.
+1. "and" og "or" blev ikke brugt; enhver side modsvarede ethvert emne fra
+   listen.
+2. Hvis et emne havde "`!`" foran, modsvarede ingen side dette emne, heller
+   ikke hvis det modsvarede et tidligere emne.
 
-For example, here is the old way to match all pages except for the SandBox
-and Discussion pages:
+Her er et eksempel på den gamle måde at modsvare alle sider undtagen
+sandkassen og diskussionssider:
 
 	* !SandBox !*/Discussion
 
-Using this old syntax is still supported. However, the old syntax is
-deprecated and will be removed at some point, and using the new syntax is
-recommended.
+Brug af denne gamle syntaks er stadigt understøttet. Den er dog på vej ud,
+så det anbefales at bruge den nye syntaks.
diff --git a/ikiwiki/pagespec/attachment.mdwn b/ikiwiki/pagespec/attachment.mdwn
index 2d33db7..e7e25b0 100644
--- a/ikiwiki/pagespec/attachment.mdwn
+++ b/ikiwiki/pagespec/attachment.mdwn
@@ -1,37 +1,37 @@
 [[!meta robots="noindex, follow"]]
 [[!if test="enabled(attachment)"
-     then="This wiki has attachments **enabled**."
-     else="This wiki has attachments **disabled**."]]
+     then="Denne wiki har vedhæftninger **aktiveret**."
+     else="Denne wiki har vedhæftninger **deaktiveret**."]]
 
-If attachments are enabled, the wiki admin can control what types of
-attachments will be accepted, via the `allowed_attachments`
-configuration setting.
+Hvis vedhæftninger er aktiveret, kan wiki-administratoren styre hvilke typer
+vedhæftninger der vil blive accepteret gennem opsætningsindstillingen
+`allowed_attachments`.
 
-For example, to limit arbitrary files to 50 kilobytes, but allow
-larger mp3 files to be uploaded by joey into a specific directory, and
-check all attachments for virii, something like this could be used:
+Som eksempel, for at begrænse vilkårlige filer til 50 kilobytes, men tillade
+større mp3-filer at blive lagt op af joey til en bestemt mappe, og checke
+alle vedhæftninger for vira, kunne noget i stil med dette bruges:
   
 	virusfree() and ((user(joey) and podcast/*.mp3 and mimetype(audio/mpeg) and maxsize(15mb)) or (!ispage() and maxsize(50kb)))
 
-The regular [[ikiwiki/PageSpec]] syntax is expanded with the following
-additional tests:
+Den normale [[ikiwiki/PageSpec]]-syntaks er udvidet med følgende yderligere
+tests:
 
-* "`maxsize(size)`" - Tests whether the attachment is no larger than the
-  specified size. The size defaults to being in bytes, but "kb", "mb", "gb"
-  etc can be used to specify the units.
+* "`maxsize(størrelse)`" - Tester hvorvidt vedhæftningen højst fylder den
+  angivne størrelse. Størrelsen angives som standard i bytes, men "kb",
+  "mb", "gb" osv. kan bruges til at angive enheder.
   
-* "`minsize(size)`" - Tests whether the attachment is no smaller than the
-  specified size.
+* "`minsize(størrelse)`" - Tester hvorvidt størrelsen mindst fylder den
+  angivne størrelse.
 
-* "`ispage()`" - Tests whether the attachment will be treated by ikiwiki as a
-  wiki page. (Ie, if it has an extension of ".mdwn", or of any other enabled
-  page format).
+* "`ispage()`" - Tester hvorvidt vedhæftningen bliver håndteret af ikiwiki
+  som en wikiside. (altså om den har endelsen ".mdwn", eller et hvilket som
+  helst andet aktiveret sideformat).
 
-  So, if you don't want to allow wiki pages to be uploaded as attachments,
-  use `!ispage()` ; if you only want to allow wiki pages to be uploaded
-  as attachments, use `ispage()`.
+  Derfor, hvis du ikke vil tillade wikisider at blive lagt op som vedhæftninger,
+  så brug `!ispage()` ; hvis du kun vil tillade wikisider at blive lagt op som
+  vedhæftninger, så brug `ispage()`.
 
-* "`mimetype(foo/bar)`" - This checks the MIME type of the attachment. You can
-  include a glob in the type, for example `mimetype(image/*)`.
+* "`mimetype(foo/bar)`" - Dette checker MIME-typen for vedhæftningen. Du kan
+  angive et glob som type, eksampelvis `mimetype(image/*)`.
 
-* "`virusfree()`" - Checks the attachment with an antiviral program.
+* "`virusfree()`" - Checker vedhæftningen med et antivirusprogram.
diff --git a/ikiwiki/preprocessordirective.mdwn b/ikiwiki/preprocessordirective.mdwn
index bd12895..57f46c8 100644
--- a/ikiwiki/preprocessordirective.mdwn
+++ b/ikiwiki/preprocessordirective.mdwn
@@ -1,7 +1,6 @@
 [[!meta redir=ikiwiki/directive delay=10]]
 [[!meta robots="noindex, follow"]]
 
-This page has moved to
-[[ikiwiki/directive|ikiwiki/directive]]. Please
-update your links, as this redirection page will be removed in a future
-ikiwiki release.
+Denne side er flyttet til [[ikiwiki/directive|ikiwiki/directive]]. Opdatér
+dine henvisninger, da denne omdirigeringsside bliver fjernet i en fremtidig
+udgave af ikiwiki.
diff --git a/ikiwiki/searching.mdwn b/ikiwiki/searching.mdwn
index 539e719..24ee343 100644
--- a/ikiwiki/searching.mdwn
+++ b/ikiwiki/searching.mdwn
@@ -1,20 +1,21 @@
 [[!meta robots="noindex, follow"]]
 
 [[!if test="enabled(search)"
-then="This wiki has searching **enabled**."
-else="This wiki has searching **disabled**."]]
+then="Denne wiki har søgning **aktiveret**."
+else="Denne wiki har søgning **deaktiveret**."]]
 
-If searching is enabled, you can enter search terms in the search field,
-as you'd expect. There are a few special things you can do to constuct
-more powerful searches.
+Hvis søgning er aktiveret, kan du angive søgeudtryk i søgefeltet, som du
+ville forvente. Der er et par specielle ting du kan gøre for at konstruere
+mere effektive søgninger.
 
-* To match a phrase, enclose it in double quotes.
-* `AND` can be used to search for documents containing two expressions.
-* `OR` can be used to search for documents containing either one of
-  two expressions.
-* Parentheses can be used to build up complicated search expressions. For
-  example, "(foo AND bar) OR (me AND you)"
-* Prefix a search term with "-" to avoid it from appearing in the results.
-  For example, "-discussion" will omit "discussion".
-* To search for a page with a given title, use "title:foo".
-* To search for pages that contain a "bar" link, use "link:bar".
+* Put gåseøjne omkring nogle ord for at søge efter dem som én formulering.
+* `AND` kan bruges til at søge efter dokumenter som indeholder to udtryk.
+* `OR` kan bruges ti at søge efter dokumenter som indeholder ethvert af to
+  udtryk.
+* Parenteser kan bruges til at opbygge komplicerede
+  søgeformuleringer. Eksempelvis "(foo AND bar) OR (mig AND dig)"
+* Put "-" foran et søgeudtryk for at undgå det blandt
+  resultaterne. Eksempelvis vil "-discussion" udelade "discussion".
+* Brug "title:foo" til at søge efter en side med en given titel.
+* Brug "link:bar" til at søge efter sider som indeholder henvisning til
+  "bar".
diff --git a/ikiwiki/subpage.mdwn b/ikiwiki/subpage.mdwn
index e047b86..186f734 100644
--- a/ikiwiki/subpage.mdwn
+++ b/ikiwiki/subpage.mdwn
@@ -1,12 +1,14 @@
 [[!meta robots="noindex, follow"]]
-ikiwiki supports placing pages in a directory hierarchy. For example,
-this page, [[SubPage]] has some related pages placed under it, like
-[[SubPage/LinkingRules]]. This is a useful way to add some order to your
-wiki rather than just having a great big directory full of pages.
+ikiwiki understøtter placering af sider i et mappehierarki. Eksempelvis har
+denne side, [[UnderSide|SubPage]], nogle relaterede sider placeret under
+sig, bl.a. [[HenvisningsRegler|SubPage/LinkingRules]]. dette er en praktisk
+måde at bringe orden i din wiki fremfor blot at have een stor mappe fuld af
+sider.
 
-To add a SubPage, just make a subdirectory and put pages in it. For
-example, this page is SubPage.mdwn in this wiki's source, and there is also
-a SubPage subdirectory, which contains SubPage/LinkingRules.mdwn. Subpages
-can be nested as deeply as you'd like.
+En [[UnderSide|SubPage]] oprettes ved blot at oprette undermappen og tilføje
+sider til den. Denne side er eksempelvis SubPage.mdwn i kildekoden til denne
+wiki, og der er også en SubPage undermappe, som indeholder
+SubPage/LinkingRules.mdwn. Undersider kan nedarves så dybt du har lyst.
 
-Linking to and from a SubPage is explained in [[LinkingRules]].
+Henvisninger til og fra en [[UnderSide||SubPage]] er forklaret under
+[[HenvisningsRegler||LinkingRules]].
diff --git a/ikiwiki/subpage/linkingrules.mdwn b/ikiwiki/subpage/linkingrules.mdwn
index e547f30..80c29ac 100644
--- a/ikiwiki/subpage/linkingrules.mdwn
+++ b/ikiwiki/subpage/linkingrules.mdwn
@@ -1,33 +1,36 @@
 [[!meta robots="noindex, follow"]]
-To link to or from a [[SubPage]], you can normally use a regular
-[[WikiLink]] that does not contain the name of the parent directory of
-the [[SubPage]]. Ikiwiki descends the directory hierarchy looking for a
-page that matches your link.
+For at henvise til eller fra en [[underside|SubPage]] kan du normalt bruge
+en almindelig normal [[WikiLink]] som ikke indeholder navnet på den
+overliggende mappe til [[undersiden|SubPage]]. Ikiwiki gennemgår
+mappehierarkiet og kigger efter en side som modsvarer din henvisning.
 
-For example, if FooBar/SubPage links to "OtherPage", ikiwiki will first 
-prefer pointing the link to FooBar/SubPage/OtherPage if it exists, next
-to FooBar/OtherPage and finally to OtherPage in the root of the wiki.
+Hvis eksempelvis FooBar/UnderSide henviser til "EnAndenSide", vil ikiwiki
+først foretrække at knytte henvisningen til FooBar/UnderSide/EnAndenSide
+hvis den eksisterer, så til FooBar/EnAndenSide og til sidst til EnAndenSide
+i roden af wikien.
 
-Note that this means that if a link on FooBar/SomePage to "OtherPage"
-currently links to OtherPage, in the root of the wiki, and FooBar/OtherPage
-is created, the link will _change_ to point to FooBar/OtherPage. On the
-other hand, a link from BazBar to "OtherPage" would be unchanged by this
-creation of a [[SubPage]] of FooBar.
+Bemærk at dette betyder, at hvis en henvisning fra FooBar/EnSide til
+"EnAndenSide" i øjeblikket henviser til EnAndenSide i roden af wikien, og
+FooBar/EnAndenSide oprettes, så vil henvisningen blive _ændret_ til at pege
+på FooBar/EnAndenSide. Omvendt vil en henvisning fra BazBar til
+"EnAndenSide" ikke blive berørt af oprettelsen af en [[underside|SubPage]]
+til FooBar.
 
-You can also specify a link that contains a directory name, like
-"FooBar/OtherPage" to more exactly specify what page to link to. This is
-the only way to link to an unrelated [[SubPage]].
+Du kan også angive en henvisning som indeholder et mappenavn, lissom
+"FooBar/EnAndenSide", for mere nøjagtigt at angive hvilken side der henvises
+til. Kun på den måde kan du henvise til en anden sides
+[[underside|SubPage]].
 
-You can use this to, for example, to link from BazBar to "FooBar/SubPage",
-or from BazBar/SubPage to "FooBar/SubPage".
+Du kan bruge dette til eksempelvis at henvise fra BazBar til
+"FooBar/UnderSide", eller fra BazBar/UnderSide til "FooBar/UnderSide".
 
-You can also use "/" at the start of a link, to specify exactly which page
-to link to, when there are multiple pages with similar names and the link
-goes to the wrong page by default. For example, linking from
-"FooBar/SubPage" to  "/OtherPage" will link to the "OtherPage" in the root
-of the wiki, even if there is a "FooBar/OtherPage".
+Du kan også bruge "/" i begyndelsen af en henvisning, til at angive
+nøjagtigt hvilken side der henvises til, når der er flere mulige sider med
+lignende navne og henvisningen ender forkert som standard. Eksempelvis vil
+en henvisning fra "FooBar/UnderSide" til "/EnAndenSide" henvise til
+"EnAndenSide" i roden af wikien, selvom der er en "FooBar/EnAndenSide".
 
-Also, if the wiki is configured with a userdir, you can link to pages
-within the userdir without specifying a path to them. This is to allow for
-easy linking to a user's page in the userdir, to sign a comment. These
-links are checked for last of all.
+Desuden kan du, hvis wikien er opsat med "userdir", henvise til sider under
+hjemmemapper uden at angive en sti til dem. Dette er for at tillade enkel
+henvisning til en brugers side i hjemmemappen, som signatur ved en
+kommentar. Sådanne henvisninger prøves allersidst.
diff --git a/ikiwiki/wikilink.mdwn b/ikiwiki/wikilink.mdwn
index 371c252..ea93116 100644
--- a/ikiwiki/wikilink.mdwn
+++ b/ikiwiki/wikilink.mdwn
@@ -1,36 +1,34 @@
 [[!meta robots="noindex, follow"]]
-WikiLinks provide easy linking between pages of the wiki. To create a
-[[WikiLink]], just put the name of the page to link to in double brackets.
-For example `\[[WikiLink]]`.
+WikiLinks gør det muligt enkelt at lave henvisninger (linke) mellem sider i
+wikien. Opret en [[WikiLink]] ved at skrive siden du vil henvise til med
+dobbelte klammer omkring. Ekempelvis `\[[WikiLink]]`.
 
-If you ever need to write something like `\[[WikiLink]]` without creating a
-wikilink, just prefix it with a `\`, like `\\[[WikiLink]]`.
+Hvis du vil skrive noget i stil med `\[[WikiLink]]` uden at det skal blive
+til en wikilink, så put en `\` (backslash) foran, som i `\\[[WikiLink]]`.
 
-There are some special [[SubPage/LinkingRules]] that come into play when
-linking between [[SubPages|SubPage]].
+Specielle [[henvisningsregler|SubPage/LinkingRules]] træder i kraft når der
+henvises på tværs af [[undersider|SubPage]].
 
-Also, if the file linked to by a WikiLink looks like an image, it will
-be displayed inline on the page.
+Desuden, hvis filen der henvises til med en WikiLink ligner et billede, vil
+det blive vist indlejret i siden.
 
-WikiLinks are matched with page names in a case-insensitive manner, so you
-don't need to worry about getting the case the same, and can capitalise
-links at the start of a sentence, and so on.
+WikiLinks knyttes til sidenavne uden skelen til store og små bogstaver, så
+du behøver ikke at bekymre dig om dette, og kan anvende stort
+begyndelsesbogstav i begyndelsen af en sætning o.l.
 
-It's also possible to write a WikiLink that uses something other than the page
-name as the link text. For example `\[[foo_bar|SandBox]]` links to the SandBox
-page, but the link will appear like this: [[foo_bar|SandBox]].
+Det er også muligt at skrive en WikiLink som bruger noget andet end
+sidenavnet som henvisningstekst. Eksempelvis henviser `\[[foo_bar|SandBox]]`
+til sandkassen, men henvisningen fremstår som her: [[foo_bar|SandBox]].
 
-To link to an anchor inside a page, you can use something like
+For at henvise til et anker inde på en side, kan du bruge noget i stil med
 `\[[WikiLink#foo]]`
 
-## Directives and WikiLinks
-
-ikiwiki has two syntaxes for
-[[directives|directive]].  The older syntax
-used spaces to distinguish between directives and
-wikilinks; as a result, with that syntax in use, you cannot use spaces
-in WikiLinks, and must replace spaces with underscores.  The newer
-syntax, enabled with the `prefix_directives` option in an ikiwiki
-setup file, prefixes directives with `!`, and thus does not prevent
-links with spaces.  Future versions of ikiwiki will turn this option
-on by default.
+## Direktiver og wikilinks
+
+ikiwiki har to syntakser til [[direktiver|directive]]. Den ældre syntaks
+brugte mellemrum til at skelne mellem direktiver og wikilinks; det medfører,
+at når den syntaks anvendes kan du ikke bruge mellemrum i WikiLinks, og må
+erstatte mellemrum med understregning. Den nyere syntaks, aktiveret med
+valget `prefix_directives` i en ikiwiki-opsætningsfil, sætter `!` foran
+direktiver, og forhindrer derfor ikke henvisninger med mellemrum. Fremtidige
+versioner af ikiwiki vil aktivere dette valg som standard.
diff --git a/index.mdwn b/index.mdwn
index 05834e0..23f6806 100644
--- a/index.mdwn
+++ b/index.mdwn
@@ -1,7 +1,8 @@
-Welcome to your new wiki.
+Velkommen til din nye wiki.
 
-All wikis are supposed to have a [[SandBox]], so this one does too.
+Alle wikier forventes at have en [[SandKasse|SandBox]], så det har denne
+også.
 
 ----
 
-This wiki is powered by [ikiwiki](http://ikiwiki.info/).
+Denne wiki er drevet af [ikiwiki](http://ikiwiki.info/).
diff --git a/recentchanges.mdwn b/recentchanges.mdwn
index 3383fc7..a8a4bf2 100644
--- a/recentchanges.mdwn
+++ b/recentchanges.mdwn
@@ -1,7 +1,7 @@
 [[!if test="enabled(meta)" then="""
-[[!meta title="RecentChanges"]]
+[[!meta title="SenesteÆndringer"]]
 """]]
-Recent changes to this wiki:
+Seneste ændringer til denne wiki:
 
 [[!inline pages="internal(recentchanges/change_*) and !*/Discussion" 
 template=recentchanges show=0]]
diff --git a/sandbox.mdwn b/sandbox.mdwn
index c66534f..f511b43 100644
--- a/sandbox.mdwn
+++ b/sandbox.mdwn
@@ -1,32 +1,33 @@
-This is the SandBox, a page anyone can edit to learn how to use the wiki.
+Dette er [[SandKassen|SandBox]], en side som hvem som helst kan redigere for
+at lære hvordan en wiki bruges.
 
 ----
 
-Here's a paragraph.
+Her er et afsnit.
 
-Here's another one with *emphasised* text.
+her er et andet afsnit med *fremhævet* tekst.
 
-# Header
+# Overskrift
 
-## Subheader
+## Underoverskrift
 
-> This is a blockquote.
+> Dette er et citat-område
 >
-> This is the first level of quoting.
+> Dette er første niveau citering.
 >
-> > This is nested blockquote.
+> > Dette er et indlejret citat-område.
 >
-> Back to the first level.
+> Tilbage til det første niveau.
 
-Numbered list 
+Nummereret liste
 
-1. First item.
-1. Another.
-1. And another..
+1. Første emne.
+1. Et andet.
+1. Og et andet..
 
-Bulleted list
+Unummereret liste
 
-* *item*
-* item
+* *emne*
+* emne
 
 [[ikiwiki/WikiLink]]
diff --git a/shortcuts.mdwn b/shortcuts.mdwn
index 14cd5ff..6175091 100644
--- a/shortcuts.mdwn
+++ b/shortcuts.mdwn
@@ -1,15 +1,14 @@
 [[!if test="enabled(shortcut)"
-     then="This wiki has shortcuts **enabled**."
-     else="This wiki has shortcuts **disabled**."]]
+     then="Denne wiki har genveje **aktiveret**."
+     else="Denne wiki har genveje **deaktiveret**."]]
 
-Some examples of using shortcuts include:
+Nogle eksempler på brug af genveje:
 
 	\[[!google foo]]
 	\[[!wikipedia War_of_1812]]
 	\[[!debbug 12345]]
-	Check the \[[!cia ikiwiki desc="CIA page for %s"]].
 
-This page controls what shortcut links the wiki supports.
+Denne side styrer hvilke genveje wikien understøtter.
 
 * [[!shortcut name=google url="http://www.google.com/search?q=%s"]]
 * [[!shortcut name=archive url="http://web.archive.org/*/%S"]]
@@ -19,14 +18,16 @@ This page controls what shortcut links the wiki supports.
 * [[!shortcut name=wikitravel url="http://wikitravel.org/en/%s"]]
 * [[!shortcut name=wiktionary url="http://en.wiktionary.org/wiki/%s"]]
 * [[!shortcut name=debbug url="http://bugs.debian.org/%s" desc="bug #%s"]]
-* [[!shortcut name=deblist url="http://lists.debian.org/debian-%s" desc="debian-%s@lists.debian.org"]]
+* [[!shortcut name=deblist url="http://lists.debian.org/debian-%s"
+  desc="debian-%s@lists.debian.org"]]
 * [[!shortcut name=debpkg url="http://packages.debian.org/%s"]]
 * [[!shortcut name=debpkgsid url="http://packages.debian.org/sid/%s"]]
 * [[!shortcut name=debpts url="http://packages.qa.debian.org/%s"]]
 * [[!shortcut name=debmsg url="http://lists.debian.org/msgid-search/%s"]]
-* [[!shortcut name=debrt url="https://rt.debian.org/Ticket/Display.html?id=%s"]]
+* [[!shortcut name=debrt
+  url="https://rt.debian.org/Ticket/Display.html?id=%s"]]
 * [[!shortcut name=debss url="http://snapshot.debian.net/package/%s"]]
-  * Usage: `\[[!debss package]]`, `\[[!debss package#version]]`, or `\[[!debss package/version]]`.  See http://snapshot.debian.net for details.
+  * Brug: `\[[!debss package]]`, `\[[!debss package#version]]`, eller `\[[!debss package/version]]`.  Se http://snapshot.debian.net for detaljer.
 * [[!shortcut name=debwiki url="http://wiki.debian.org/%s"]]
 * [[!shortcut name=fdobug url="https://bugs.freedesktop.org/show_bug.cgi?id=%s" desc="freedesktop.org bug #%s"]]
 * [[!shortcut name=fdolist url="http://lists.freedesktop.org/mailman/listinfo/%s" desc="%s@lists.freedesktop.org"]]
@@ -60,18 +61,17 @@ This page controls what shortcut links the wiki supports.
 * [[!shortcut name=man url="http://linux.die.net/man/%s"]]
 * [[!shortcut name=ohloh url="http://www.ohloh.net/projects/%s"]]
 
-To add a new shortcut, use the `shortcut`
-[[ikiwiki/directive]]. In the url, "%s" is replaced with the
-text passed to the named shortcut, after url-encoding it, and '%S' is
-replaced with the raw, non-encoded text. The optional `desc` parameter
-controls the description of the link.
+Tilføj en ny genvej med [[direktivet|ikiwiki/directive]] `shortcut`. I URLen
+erstattes "%s" med teksten overdraget til den navngivne genvej, efter
+URL-omkodning af den, og '%S' erstattes med den rå, ukodede tekst. Den
+valgfri `desc`-parameter styrer beskrivelsen af henvisningen.
 
-Remember that the `name` you give the shortcut will become a new
-[[ikiwiki/directive]].  Avoid using a `name` that conflicts
-with an existing directive.  These directives also accept a `desc`
-parameter that will override the one provided at definition time.
+Husk at `name`-parameteren som du tildeler genvejen bliver et nyt
+[[direktiv|ikiwiki/directive]]. Undgå et navn som er i strid med et
+eksisterende direktiv. Disse direktiver accepterer også en `desc`-parameter
+som vil overskygge den der blev angivet ved definitionen.
 
-If you come up with a shortcut that you think others might find useful,
-consider contributing it to the [shortcuts page on the ikiwiki
-ikiwiki](http://ikiwiki.info/shortcuts/), so that future versions of
-ikiwiki will include your shortcut in the standard underlay.
+Hvis du finder på en genvej som du mener andre kunne få glæde af også, kan
+du overveje at bidrage med den til [shortcuts-siden på ikiwiki
+ikiwikien](http://ikiwiki.info/shortcuts/), så fremtidige versioner af
+ikiwiki inkluderer din genvej i standardunderlaget.
diff --git a/templates.mdwn b/templates.mdwn
index eff0e15..3109931 100644
--- a/templates.mdwn
+++ b/templates.mdwn
@@ -1,74 +1,72 @@
 [[!meta robots="noindex, follow"]]
 [[!if test="enabled(template)"
-then="This wiki has templates **enabled**."
-else="This wiki has templates **disabled**."
-]]
+then="Denne wiki har skabeloner **aktiveret**."
+else="Denne wiki har skabeloner **deaktiveret**." ]]
 
-Templates are files that can be filled out and inserted into pages in the
-wiki.
+Skabeloner er filer som kan blive udfyldt og indsat på sider i wikien.
 
 [[!if test="enabled(template) and enabled(inline)" then="""
 
-These templates are available for inclusion onto other pages in this
+Disse skabeloner er tilgængelige til indsættelse på andre sider i denne
 wiki:
 
 [[!inline pages="templates/* and !*/discussion" feeds=no archive=yes
 sort=title template=titlepage]]
 """]]
 
-## Using a template
+## Brug af skabelon
 
-Using a template works like this:
+En skabelon bruges som her:
 
-	\[[!template id=note text="""Here is the text to insert into my note."""]]
+	\[[!template id=note text="""Her er teksten til at sætte ind i min note."""]]
 
-This fills out the [[note]] template, filling in the `text` field with
-the specified value, and inserts the result into the page.
+Dette udfylder [[note]]-skabelonen, ved at erstatte `text`-feltet med den
+angivne værdi og indsætte resultatet på siden.
 
-Generally, a value can include any markup that would be allowed in the wiki
-page outside the template. Triple-quoting the value even allows quotes to
-be included in it. Combined with multi-line quoted values, this allows for
-large chunks of marked up text to be embedded into a template:
+Generelt kan en værdi indeholde enhver opmærkning som ville være tilladt på
+wikisiden udenfor skabelonen. Trippel-citering af værdien tillader endda at
+bruge citering som del af værdien. Kombineret med flerlinje-citerede værdier
+tillader dette indlejring af store klumper af opmærket tekst i skabelonen:
 
-        \[[!template id=foo name="Sally" color="green" age=8 notes="""
-        * \[[Charley]]'s sister.
-        * "I want to be an astronaut when I grow up."
-        * Really 8 and a half.
+        \[[!template id=foo name="Sally" color="grøn" age=8 notes="""
+        * \[[Charley]]'s søster.
+        * "Jeg vil være en astronaut når jeg bliver stor."
+        * Egentligt 8 og et halvt.
         """]]
 
-## Creating a template
+## Oprettelse af skabelon
 
-To create a template, simply add a template directive to a page, and the 
-page will provide a link that can be used to create the template. The template
-is a regular wiki page, located in the `templates/` subdirectory inside
-the source directory of the wiki.
+Opret en skabelon ved simpelthen at tilføje skabelon-direktivet til en side,
+så vil siden vise en henvisning som kan bruges til at oprette
+skabelonen. Skabelonen er en normal wikiside, placeret i `templates/`
+undermappen indeni wikiens kildemappe.
 
-The template uses the syntax used by the [[!cpan HTML::Template]] perl
-module, which allows for some fairly complex things to be done. Consult its
-documentation for the full syntax, but all you really need to know are a
-few things:
+Skabelonen bruger samme syntax som perl-modulet [[!cpan HTML::Template]] som
+giver mulighed for at lave ret komplekse ting. Læs dokumentationen for den
+fulde syntaks, men alt hvad du reelt behøver at vide er nogle få ting:
 
-* Each parameter you pass to the template directive will generate a 
-  template variable. There are also some pre-defined variables like PAGE
-  and BASENAME.
-* To insert the value of a variable, use `<TMPL_VAR variable>`. Wiki markup
-  in the value will first be converted to html.
-* To insert the raw value of a variable, with wiki markup not yet converted
-  to html, use `<TMPL_VAR raw_variable>`.
-* To make a block of text conditional on a variable being set use
-  `<TMPL_IF NAME="variable">text</TMPL_IF>`.
-* To use one block of text if a variable is set and a second if it's not,
-  use `<TMPL_IF NAME="variable">text<TMPL_ELSE>other text</TMPL_IF>`
+* Ethvert parameter du angiver til skabelondirektivet vil danne en
+  skabelonvariabel. Der er også nogle foruddefinerede variable som PAGE og
+  BASENAME.
+* Brug `<TMPL_VAR variabel>` til at indsætte værdien af en
+  variabel. Wiki-opmærkning i værdien bliver først konverteret til html.
+* Brug `<TMPL_VAR raw_variabel>` til at indsætte den rå værdi af en
+  variabel, med wiki-opmærkning endnu ikke konverteret til html.
+* Gør en tekstblok betinget af at en variabel er i brug med `<TMPL_IF
+  NAME="variabel">tekst</TMPL_IF>`.
+* Brug een tekstblok hvis en variabel er i brug, og en anden hvis ikke, med
+  `<TMPL_IF NAME="variabel">tekst<TMPL_ELSE>anden tekst</TMPL_IF>`
 
-Here's a sample template:
+Her er et eksempel på en skabelon (det anbefales at bruge engelske
+variabelnavne for at undgå problemer med æøå og andre specialtegn):
 
         <span class="infobox">
-        Name: \[[<TMPL_VAR raw_name>]]<br />
-        Age: <TMPL_VAR age><br />
+        Navn: \[[<TMPL_VAR raw_name>]]<br />
+        Alder: <TMPL_VAR age><br />
         <TMPL_IF NAME="color">
-        Favorite color: <TMPL_VAR color><br />
+        Favoritfarve: <TMPL_VAR color><br />
         <TMPL_ELSE>
-        No favorite color.<br />
+        Ingen favoritfarve.<br />
         </TMPL_IF>
         <TMPL_IF NAME="notes">
         <hr />
@@ -76,12 +74,12 @@ Here's a sample template:
         </TMPL_IF>
         </span>
 
-The filled out template will be formatted the same as the rest of the page
-that contains it, so you can include WikiLinks and all other forms of wiki
-markup in the template. Note though that such WikiLinks will not show up as
-backlinks to the page that uses the template.
+Den udfyldte skabelon vil blive formateret som resten af siden den er
+inkluderet i, så du kan medtage WikiLinks og alle andre former for wiki-
+opmærkning i skabelonen. Bemærk dog at sådanne WikiLinks ikke vil dukke op
+som krydshenvisninger (backlinks) til den side som anvender skabelonen.
 
-Note the use of "raw_name" inside the [[ikiwiki/WikiLink]] generator. This
-ensures that if the name contains something that might be mistaken for wiki
-markup, it's not converted to html before being processed as a
-[[ikiwiki/WikiLink]].
+Bemærk brugen af "raw_name" indeni [[ikiwiki/WikiLink]]-generatoren. Dette
+sikrer at hvor navnet indeholder noget som måske kan fejltolkes som
+wiki-opmærkning, bliver det ikke konverteret til html før det er blevet
+behandlet som en [[ikiwiki/WikiLink]].
diff --git a/templates/note.mdwn b/templates/note.mdwn
index 4cc323c..3a5b87a 100644
--- a/templates/note.mdwn
+++ b/templates/note.mdwn
@@ -2,10 +2,10 @@
 <TMPL_VAR text>
 </div>
 <TMPL_UNLESS NAME="text">
-Use this template to insert a note into a page. The note will be styled to
-float to the right of other text on the page. This template has one
-parameter:
+Brug denne skabelon til at indsætte en note på en side. Noten vil blive
+udsmykket til at flyde til højre for den øvrige tekst på siden. Denne
+skabelon har et parameter:
 <ul>
-<li>`text` - the text to display in the note
+<li>`text` - teksten som vises i noten
 </ul>
 </TMPL_UNLESS>
diff --git a/templates/popup.mdwn b/templates/popup.mdwn
index b355daa..f3358ac 100644
--- a/templates/popup.mdwn
+++ b/templates/popup.mdwn
@@ -1,15 +1,14 @@
 <TMPL_UNLESS NAME="mouseover">
-Use this template to create a popup window that is displayed when the mouse
-is over part of the page. This template has two parameters:
+Brug denne skabelon til at lave et popup-vindue som vises når musemarkøren er
+henover en del af siden. Denne skabelon har to parametre:
 <ul>
-<li>`mouseover` - This is the text or other content that triggers the
-popup.
-<li>`popup` - This should be the content of the popup window. It can be
-anything, even images or a whole little wiki page, but should not be too
-large for good usability.
+<li>`mouseover` - Dette er teksten eller andet indhold som udløser popup'en.
+<li>`popup` - Her angives indeholdet af popup-vinduet. Det kan være hvad som
+helst, endda billeder eller hele små wikisider, men bør ikke være for stort af
+hensyn til brugervenligheden.
 </ul>
-Note that browsers that do not support the CSS will display the popup
-inline in the page, inside square brackets.
+Bemærk at browsere som ikke understøtter CSS-koden vil vise popup'en indlejret
+på siden, indenfor lodrette klammer.
 </TMPL_UNLESS>
 <span class="popup"><TMPL_VAR mouseover>
 <span class="paren">[</span><span class="balloon"><TMPL_VAR popup></span><span class="paren">]</span>
-- 
cgit v1.2.3