| Age | Commit message (Collapse) | Author |
|---|
|
Conflicts:
debian/changelog
|
|
On various sites I have two IkiWiki instances running from the same
repository: one accessible via http and only accepting openid logins,
and one accessible via authenticated https and only accepting httpauth.
The https version should still pretty-print OpenIDs seen in git history,
even though it does not itself accept OpenID logins.
|
|
available.
The test suite was emitting a lot of ugly gettext warnings;
setting LC_ALL didn't solve the problem for all locale setups
(since ikiwiki remaps it to LANG, and ikiwiki didn't know about
the C locale).
People also seem generally annoyed by the messages when
Locale::Gettext is not installed, and I suspect will be
generally happier if it just silently doesn't localize.
The optimisation came about when I noticed that the gettext
sub was doing rather a lot of work each call just to see
if localisation is needed. We can avoid that work by caching,
and the best thing to cache is a version of the gettext sub
that does exactly the right thing.
This was slightly complicated by the locale setting,
which might need to override the original locale (or lack
thereof) after gettext has been called. So it needs to invalidate
the cache in that case. It used to do it via a global variable,
which I am happy to have also gotten rid of.
|
|
Conflicts:
debian/changelog
debian/control
Signed-off-by: intrigeri <intrigeri@boum.org>
|
|
Do not allow an unterminated """ string to be treated as a series of bare
words. Fixes runaway regexp recursion/backtracking in strange situations.
(See 1d57a21c987a5e970df01efe10acdf69982c2d61 for test case.)
|
|
Conflicts:
debian/changelog
|
|
And avoid a whole class of potential security problems (though
none that I know of actually existing..), by avoiding
performing any string interpolation on user-supplied data when translating
pagespecs.
|
|
underlays via add_underlay.
|
|
This is sorta an optimisation, and sorta a bug fix. In one
test case I have available, it can speed a page build up from 3
minutes to 3 seconds.
The root of the problem is that $links{$page} contains arrays of
links, rather than hashes of links. And when a link is found,
it is just pushed onto the array, without checking for dups.
Now, the array is emptied before scanning a page, so there
should not be a lot of opportunity for lots of duplicate links
to pile up in it. But, in some cases, they can, and if there
are hundreds of duplicate links in the array, then scanning it
for matching links, as match_link and some other code does,
becomes much more expensive than it needs to be.
Perhaps the real right fix would be to change the data structure
to a hash. But, the list of links is never accessed like that,
you always want to iterate through it.
I also looked at deduping the list in saveindex, but that does
a lot of unnecessary work, and doesn't completly solve the problem.
So, finally, I decided to add an add_link function that handles deduping,
and make ikiwiki-transition remove the old dup links.
|
|
This reverts commit 2f96c49bd1826ecb213ae025ad456a714aa04863.
I forgot about internal pages. We don't want * matching them!
I left the optimisation in pagecount, where it used to live.
Internal pages probably don't matter when they're just being
counted.
|
|
Add an optimisation for the semi-common case of a "*" pagespec. Can
avoid doing any real processing in this case.
|
|
* pagespec_match_list: New API function, matches pages in a list
and throws an error if the pagespec is bad.
* inline, brokenlinks, calendar, linkmap, map, orphans, pagecount,
pagestate, postsparkline: Display a handy error message if the pagespec
is erronious.
|
|
* Add IkiWiki::ErrorReason objects, and modify pagespecs to return
them in cases where they fail to match due to a configuration or syntax
error.
* inline: Display a handy error message if the inline cannot display any
pages due to such an error.
This is perhaps somewhat incomplete, as other users of pagespecs do not
display the error, and will eventually need similar modifications to inline.
I should probably factor out a pagespec_match_all function and make it throw
ErrorReasons.
|
|
Conflicts:
debian/changelog
debian/control
|
|
|
|
Conflicts:
debian/control
|
|
The problem was introduced by the recent noextension patches.
Object autovivification caused junk to get into %htmlize,
and all keys of that showed up as page types.
|
|
Because getopt::long is used in passthrough mode, if a known
option like --wikiname that needs a parameter is specified w/o
the parameter, it will not be processed, and passed on through.
So in this case the "unknown option" message is innaccurate.
Make it slightly better by noting that the problem can be a missing
parameter.
|
|
This modification was initially done in editpage, in commit
a3726968bc13f19f458c372cbd7cf92ae4c6fce5, but was then lost while merging
upstream/master branch.
Signed-off-by: intrigeri <intrigeri@boum.org>
|
|
|
|
It no longer makes sense to keep these functions in editpage, because
serveral plugins now exist that use them, and users may want to disable
editpage, while leaving those plugins enabled.
Most notably, comments uses both functions, and it's entirely appropriate
to disable editpage but still want to have comments enabled.
Less likely, attachments, rename, and remove all use check_canedit -- but
it would be unusual indeed to want to use these w/o editpage.
|
|
It enables debug prints, so not just during building, but at runtime.
|
|
It used to replace unknown functions with "0" when translating a pagespec.
Instead, replace it with a FailReason object. This way, the pagespec will
still evaluate as before (possibly successfully if other terminals exist),
but a human-readable error will be shown if the result is displayed.
Also, an empty pagespec used to be replaced with "0", to avoid a eval
error. Also use a FailReason here.
|
|
For use by Setup/Automator
|
|
name parameter. Previously, match_created_before(), match_created_after(), match_sourcepage(), and match_destpage() did not support that, and the docs were not clear.
|
|
|
|
It seems to be a failing of i18n in unix that the translation stops at the
commands and the parameters to them, and ikiwiki is no exception with its
currently untranslated directives. So the little bit that's translated sticks
out like a sore thumb. It also breaks building of wikis if a different locale
happens to be set.
I suppose the best thing to do is either give up on the localisation of this
part completly, or make it recognise English in addition to the locale. I've
tenatively chosen the latter.
(Also accept 1 and 0 as input.)
|
|
|
|
inline has a format hook that is an optimisation hack. Until this hook
runs, the inlined content is not present on the page. This can prevent
other format hooks, that process that content, from acting on inlined
content. In bug ##509710, we discovered this happened commonly for the
embed plugin, but it could in theory happen for many other plugins (color,
cutpaste, etc) that use format to fill in special html after sanitization.
The ordering was essentially random (hash key order). That's kinda a good
thing, because hooks should be independent of other hooks and able to run
in any order. But for things like inline, that just doesn't work.
To fix the immediate problem, let's make hooks able to be registered as
running "first". There was already the ability to make them run "last".
Now, this simple first/middle/last ordering is obviously not going to work
if a lot of things need to run first, or last, since then we'll be back to
being unable to specify ordering inside those sets. But before worrying about
that too much, and considering dependency ordering, etc, observe how few
plugins use last ordering: Exactly one needs it. And, so far, exactly one
needs first ordering. So for now, KISS.
Another implementation note: I could have sorted the plugins with
first/last/middle as the primary key, and plugin name secondary, to get a
guaranteed stable order. Instead, I chose to preserve hash order. Two
opposing things pulled me toward that decision:
1. Since has order is randomish, it will ensure that no accidental
ordering assumptions are made.
2. Assume for a minute that ordering matters a lot more than expected.
Drastically changing the order a particular configuration uses could
result in a lot of subtle bugs cropping up. (I hope this assumption is
false, partly due to #1, but can't rule it out.)
|
|
|
|
|
|
No transition code implemented, but I will probably make a 2.x release that
warns about found globlists.
|
|
|
|
|
|
|
|
This fixes a bug: when a page links to its own #comments anchor you would
get a link like "index.html#comments" rather than "./#comments".
|
|
|
|
A malformed pagespec will cause $@ to be set when translated, but if
it is used a second time, the memoization will defeat that check. Better to
check for the result not being defined.
|
|
|
|
|
|
Had forgot to include it in the option list.
|
|
This avoids constructing urls like "./../foo/".
The leading "../" avoids any colon confusion already.
I noticed in my logs that certain badly written web spiders (hello again,
Yahoo!) fail to follow urls like ikiwiki was constructing to the right
place (instead ending up at "./foo/")
|
|
Since ikiwiki uses open :utf8, perl assumes that files contain valid utf-8.
If it turns out to be malformed it may later crash while processing strings
read from them, with 'Malformed UTF-8 character (fatal)'.
As at least a quick fix, use utf8::valid as soon as data is read, and if
it's not valid, call encode_utf8 on the string, thus clearing the utf-8
flag. This may cause follow-on encoding problems, but will avoid this
crash, and the input file was broken anyway, so GIGO is a reasonable
response. (I looked at calling decode_utf8 after, but it seemed to cause
more trouble than it was worth. BTW, use open ':encoding(utf8)' avaoids
this problem, but the corrupted data later causes Storable to crash when
writing the index.)
This is a quick fix, clearly imperfect:
- It might be better to explicitly call decode_utf8 when reading files,
rather than using the IO layer.
- Data read other than by readfile() can still sneak in bad utf-8. While
ikiwiki does very little file input not using it, stdin for the CGI
would be one way.
|
|
This is necessary so that things that fork to the background,
like pinger, and inline ping, don't block other cgis from running.
Note that websetup also calls unlockwiki, before refreshing / rebuilding
the wiki. It makes perfect sense for that not to block other cgis.
|
|
* Stop busy-waiting in lockwiki, as this could delay ikiwiki from waking up
for up to one second. The bailout code is no longer needed.
* Remove support for unused optional wait parameter from lockwiki.
|
|
This fixes a problem exposed by the recent change to tags
(a2839de9362187b67b0e3a564461e272e64fd9b4). That recorded tag links as
absolute by including a leading slash in the link. The same could also be
done with an absolute wikilink.
In either case, link() would not match such links, unless the leading slash
was included in the link to match. But that's not right, because pagespecs
match absolute by default. So strip the leading slash.
Note that to keep any existing `link(/foo)` pagespecs working after this
change, the leading slash is removed from there, too.
|
|
|
|
|
|
|
|
Still need to investigate possible races, and test some more.
|
